From: Thierry Reding <thierry.reding@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Prathamesh Shete <pshete@nvidia.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v4 0/3] pinctrl: tegra: Add Tegra234 pinmux driver
Date: Fri, 2 Jun 2023 16:14:42 +0200 [thread overview]
Message-ID: <20230602141445.3012550-1-thierry.reding@gmail.com> (raw)
From: Thierry Reding <treding@nvidia.com>
Hi,
this is an updated version of v3 of the series, which can be found here:
http://patchwork.ozlabs.org/project/linux-tegra/list/?series=357257
This addresses some comments from Krzysztof on the DT bindings. However,
one change that I didn't make is to remove the list of explicitly
allowed pin group properties. This is so that the common bindings can
define the format of all pin group properties, but the per-SoC bindings
can then decide which ones are allowed for each IP version. I added a
comment to the bindings to explain why this is done.
Changes in v4:
- use unevaluatedProperties for specific bindings and drop unnecessary
or duplicated properties
- move "$ref" and "required" properties into more standard locations
- use "additionalProperties: true" for common bindings
- only allow valid per-SoC pin group properties
Note that the driver patch applies on top of the function table fix that
I sent out earlier:
http://patchwork.ozlabs.org/project/linux-tegra/list/?series=357206
Once accepted, patches 1 and 2 can go through the pinctrl tree and I can
pick up patch 3 into the Tegra tree. Alternatively I can also pick up
patch 1 into the Tegra tree to help with validation. We're not quite at
a point yet where the Tegra DTs fully validate, so it doesn't matter
much which way these get applied.
Thanks,
Thierry
Prathamesh Shete (3):
dt-bindings: pinctrl: Document Tegra234 pin controllers
pinctrl: tegra: Add Tegra234 pinmux driver
arm64: tegra: Add Tegra234 pin controllers
.../pinctrl/nvidia,tegra234-pinmux-aon.yaml | 59 +
.../nvidia,tegra234-pinmux-common.yaml | 66 +
.../pinctrl/nvidia,tegra234-pinmux.yaml | 139 ++
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 12 +
drivers/pinctrl/tegra/Kconfig | 4 +
drivers/pinctrl/tegra/Makefile | 1 +
drivers/pinctrl/tegra/pinctrl-tegra234.c | 1969 +++++++++++++++++
drivers/soc/tegra/Kconfig | 1 +
8 files changed, 2251 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
create mode 100644 drivers/pinctrl/tegra/pinctrl-tegra234.c
--
2.40.1
next reply other threads:[~2023-06-02 14:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 14:14 Thierry Reding [this message]
2023-06-02 14:14 ` [PATCH v4 1/3] dt-bindings: pinctrl: Document Tegra234 pin controllers Thierry Reding
2023-06-04 10:32 ` Krzysztof Kozlowski
2023-06-02 14:14 ` [PATCH v4 2/3] pinctrl: tegra: Add Tegra234 pinmux driver Thierry Reding
2023-06-03 10:46 ` andy.shevchenko
2023-06-02 14:14 ` [PATCH v4 3/3] arm64: tegra: Add Tegra234 pin controllers Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602141445.3012550-1-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pshete@nvidia.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).