[PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

The PFUZE100 PMIC has an interrupt pin that can be connected to
the host SoC. Describe it in the dt-bindings to avoid warnings like:

imx6q-zii-rdu2.dtb: pmic@8: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/regulator/pfuze100.yaml

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes since v1:
- None. Only collected Conor's Reviewed-by tag.

 Documentation/devicetree/bindings/regulator/pfuze100.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index 67a30b23b92c..e384e4953f0a 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -36,6 +36,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   fsl,pfuze-support-disable-sw:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |
-- 
2.34.1

[PATCH v2 2/3] ARM: dts: imx: Use 'pmic' as node name

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

Devicetree node names should be generic. Use 'pmic' as node name
to avoid devicetree check warning from pfuze100.yaml.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Convert more devicetrees that were missed in v1.

 arch/arm/boot/dts/imx6dl-riotboard.dts           | 2 +-
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts          | 2 +-
 arch/arm/boot/dts/imx6q-gw5400-a.dts             | 2 +-
 arch/arm/boot/dts/imx6q-novena.dts               | 2 +-
 arch/arm/boot/dts/imx6q-pistachio.dts            | 2 +-
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi            | 2 +-
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi         | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi           | 2 +-
 arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi   | 2 +-
 arch/arm/boot/dts/imx6sl-evk.dts                 | 2 +-
 arch/arm/boot/dts/imx6sx-sdb-reva.dts            | 2 +-
 arch/arm/boot/dts/imx6sx-sdb.dts                 | 2 +-
 arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 2 +-
 arch/arm/boot/dts/imx6ul-pico.dtsi               | 2 +-
 arch/arm/boot/dts/imx7d-nitrogen7.dts            | 2 +-
 arch/arm/boot/dts/imx7d-pico.dtsi                | 2 +-
 arch/arm/boot/dts/imx7d-sdb.dts                  | 2 +-
 arch/arm/boot/dts/imx7s-warp.dts                 | 2 +-
 18 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 24c7f535f63b..0366d1037ef4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -177,7 +177,7 @@ codec: sgtl5000@a {
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	pmic: pf0100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 9591848cbd37..3815cb660ff7 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -134,7 +134,7 @@ &pinctrl_stmpe2
 		     &pinctrl_pfuze>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio3>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 522a51042965..0ba802b891b5 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -206,7 +206,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index ee8c0bd3ecfd..a7d5a68110fc 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -308,7 +308,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2_novena>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index bad8d831e64e..109b46a22b5e 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -208,7 +208,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4e20cb97058e..e60efb6488a3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -400,7 +400,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index f79caa36f3d2..68e97180d33e 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -336,7 +336,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 53b080c97f2d..4fe58764b929 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -338,7 +338,7 @@ ov5640_to_mipi_csi2: endpoint {
 		};
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index bf86b639fdac..9b8c9c23ab54 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -27,7 +27,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index dc5d596c18db..239bc6dfc584 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -160,7 +160,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 7dda42553f4b..48f19dede467 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -15,7 +15,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 969cfe920d25..e05a1be5553c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -14,7 +14,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index b9a1401e6c6d..bfcd8f7d86dd 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -171,7 +171,7 @@ proximity: sx9500@28 {
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index 357ffb2f5ad6..4ffe99ed55ca 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -131,7 +131,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index a31de900139d..9c6476bda4a0 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -159,7 +159,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e0bff39e8d3e..73d90845e85c 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -170,7 +170,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index c9f6137e73e7..cc9b8570ed4d 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -275,7 +275,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index e8734d218b9d..ba7231b364bb 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -94,7 +94,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
-- 
2.34.1

Re: [PATCH v2 2/3] ARM: dts: imx: Use 'pmic' as node name

[Krzysztof Kozlowski]

On 27/05/2023 22:50, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Devicetree node names should be generic. Use 'pmic' as node name
> to avoid devicetree check warning from pfuze100.yaml.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 2/3] ARM: dts: imx: Use 'pmic' as node name

[Shawn Guo]

On Sat, May 27, 2023 at 05:50:47PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Devicetree node names should be generic. Use 'pmic' as node name
> to avoid devicetree check warning from pfuze100.yaml.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!

[PATCH v2 3/3] ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

As documented in pfuze100.yaml, the correct name for the regulator is
"coin", so change it to fix the following DT check warning:

imx6ul-ccimx6ulsbcexpress.dtb: pmic@8: regulators: 'vcoin' does not match any of the regexes:

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Keep the node and change the name from vcoin to coin.

 arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index b5781c3656d1..7d1a391431bd 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -158,7 +158,7 @@ ldo4_ext: vldo4 {
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcoin_chg: vcoin {
+			vcoin_chg: coin {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <3300000>;
 			};
-- 
2.34.1

Re: [PATCH v2 3/3] ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name

[Shawn Guo]

On Sat, May 27, 2023 at 05:50:48PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> As documented in pfuze100.yaml, the correct name for the regulator is
> "coin", so change it to fix the following DT check warning:
> 
> imx6ul-ccimx6ulsbcexpress.dtb: pmic@8: regulators: 'vcoin' does not match any of the regexes:
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!

Re: [PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[Krzysztof Kozlowski]

On Sat, 27 May 2023 17:50:46 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> The PFUZE100 PMIC has an interrupt pin that can be connected to
> the host SoC. Describe it in the dt-bindings to avoid warnings like:
> 
> imx6q-zii-rdu2.dtb: pmic@8: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/regulator/pfuze100.yaml
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> Changes since v1:
> - None. Only collected Conor's Reviewed-by tag.
> 
>  Documentation/devicetree/bindings/regulator/pfuze100.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1786770


pf0100@8: $nodename:0: 'pf0100@8' does not match '^pmic@[0-9]$'
	arch/arm/boot/dts/imx6dl-riotboard.dtb

pfuze100@8: $nodename:0: 'pfuze100@8' does not match '^pmic@[0-9]$'
	arch/arm/boot/dts/imx6dl-gw54xx.dtb
	arch/arm/boot/dts/imx6dl-sabreauto.dtb
	arch/arm/boot/dts/imx6dl-sabresd.dtb
	arch/arm/boot/dts/imx6dl-wandboard-revd1.dtb
	arch/arm/boot/dts/imx6q-dmo-edmqmx6.dtb
	arch/arm/boot/dts/imx6q-gw5400-a.dtb
	arch/arm/boot/dts/imx6q-gw54xx.dtb
	arch/arm/boot/dts/imx6q-novena.dtb
	arch/arm/boot/dts/imx6q-pistachio.dtb
	arch/arm/boot/dts/imx6qp-sabreauto.dtb
	arch/arm/boot/dts/imx6qp-sabresd.dtb
	arch/arm/boot/dts/imx6qp-wandboard-revd1.dtb
	arch/arm/boot/dts/imx6q-sabreauto.dtb
	arch/arm/boot/dts/imx6q-sabresd.dtb
	arch/arm/boot/dts/imx6q-wandboard-revd1.dtb
	arch/arm/boot/dts/imx6sl-evk.dtb
	arch/arm/boot/dts/imx6sx-sdb.dtb
	arch/arm/boot/dts/imx6sx-sdb-mqs.dtb
	arch/arm/boot/dts/imx6sx-sdb-reva.dtb
	arch/arm/boot/dts/imx6sx-sdb-sai.dtb
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dtb

pfuze3000@8: $nodename:0: 'pfuze3000@8' does not match '^pmic@[0-9]$'
	arch/arm/boot/dts/imx6ul-pico-dwarf.dtb
	arch/arm/boot/dts/imx6ul-pico-hobbit.dtb
	arch/arm/boot/dts/imx6ul-pico-pi.dtb
	arch/arm/boot/dts/imx7d-nitrogen7.dtb
	arch/arm/boot/dts/imx7d-pico-dwarf.dtb
	arch/arm/boot/dts/imx7d-pico-hobbit.dtb
	arch/arm/boot/dts/imx7d-pico-nymph.dtb
	arch/arm/boot/dts/imx7d-pico-pi.dtb
	arch/arm/boot/dts/imx7d-sdb.dtb
	arch/arm/boot/dts/imx7d-sdb-reva.dtb
	arch/arm/boot/dts/imx7d-sdb-sht11.dtb
	arch/arm/boot/dts/imx7s-warp.dtb

pmic@8: regulators: 'vcoin' does not match any of the regexes: '^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$', '^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$', '^vgen[1-6]$', '^vldo[1-4]$', 'pinctrl-[0-9]+'
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dtb
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dtb

Re: [PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[Krzysztof Kozlowski]

On 30/05/2023 14:57, Krzysztof Kozlowski wrote:
> On Sat, 27 May 2023 17:50:46 -0300, Fabio Estevam wrote:
>> From: Fabio Estevam <festevam@denx.de>
>>
>> The PFUZE100 PMIC has an interrupt pin that can be connected to
>> the host SoC. Describe it in the dt-bindings to avoid warnings like:
>>
>> imx6q-zii-rdu2.dtb: pmic@8: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
>> From schema: Documentation/devicetree/bindings/regulator/pfuze100.yaml
>>
>> Signed-off-by: Fabio Estevam <festevam@denx.de>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> ---
>> Changes since v1:
>> - None. Only collected Conor's Reviewed-by tag.
>>
>>  Documentation/devicetree/bindings/regulator/pfuze100.yaml | 3 +++
>>  1 file changed, 3 insertions(+)
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1786770
> 
> 
> pf0100@8: $nodename:0: 'pf0100@8' does not match '^pmic@[0-9]$'
> 	arch/arm/boot/dts/imx6dl-riotboard.dtb
> 
> pfuze100@8: $nodename:0: 'pfuze100@8' does not match '^pmic@[0-9]$'

It seems you fix all these.

Best regards,
Krzysztof

Re: [PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[Fabio Estevam]

On 30/05/2023 09:59, Krzysztof Kozlowski wrote:

> It seems you fix all these.

That's correct. All these errors were fixed by this series.

Re: (subset) [PATCH v2 1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts

[Mark Brown]

On Sat, 27 May 2023 17:50:46 -0300, Fabio Estevam wrote:
> The PFUZE100 PMIC has an interrupt pin that can be connected to
> the host SoC. Describe it in the dt-bindings to avoid warnings like:
> 
> imx6q-zii-rdu2.dtb: pmic@8: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/regulator/pfuze100.yaml
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/3] dt-bindings: pfuze100.yaml: Add an entry for interrupts
      commit: 87fe0214d7aae5e1152953710489c5ab5469b388

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark