From: Abe Kohandel <abe.kohandel@intel.com>
To: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Serge Semin <fancer.lancer@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Abe Kohandel <abe.kohandel@intel.com>
Subject: [PATCH 1/2] spi: dw: Add compatible for Intel Mount Evans SoC
Date: Tue, 6 Jun 2023 07:54:01 -0700 [thread overview]
Message-ID: <20230606145402.474866-2-abe.kohandel@intel.com> (raw)
In-Reply-To: <20230606145402.474866-1-abe.kohandel@intel.com>
The Intel Mount Evans SoC's Integrated Management Complex uses the SPI
controller for access to a NOR SPI FLASH. However, the SoC doesn't
provide a mechanism to override the native chip select signal.
This driver doesn't use DMA for memory operations when a chip select
override is not provided due to the native chip select timing behavior.
As a result no DMA configuration is done for the controller and this
configuration is not tested.
The controller also has an errata where a full TX FIFO can result in
data corruption. The suggested workaround is to never completely fill
the FIFO. The TX FIFO has a size of 32 so the fifo_len is set to 31.
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/spi/spi-dw-mmio.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 5f2aee69c1c1..c1d16157de61 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -236,6 +236,31 @@ static int dw_spi_intel_init(struct platform_device *pdev,
return 0;
}
+/*
+ * The Intel Mount Evans SoC's Integrated Management Complex uses the
+ * SPI controller for access to a NOR SPI FLASH. However, the SoC doesn't
+ * provide a mechanism to override the native chip select signal.
+ *
+ * This driver doesn't use DMA for memory operations when a chip select
+ * override is not provided due to the native chip select timing behavior.
+ * As a result no DMA configuration is done for the controller and this
+ * configuration is not tested.
+ */
+static int dw_spi_mountevans_imc_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ /*
+ * The Intel Mount Evans SoC's Integrated Management Complex DW
+ * apb_ssi_v4.02a controller has an errata where a full TX FIFO can
+ * result in data corruption. The suggested workaround is to never
+ * completely fill the FIFO. The TX FIFO has a size of 32 so the
+ * fifo_len is set to 31.
+ */
+ dwsmmio->dws.fifo_len = 31;
+
+ return 0;
+}
+
static int dw_spi_canaan_k210_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
@@ -405,6 +430,10 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
{ .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
{ .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
+ {
+ .compatible = "intel,mountevans-imc-ssi",
+ .data = dw_spi_mountevans_imc_init,
+ },
{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
{ .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init},
--
2.40.1
next prev parent reply other threads:[~2023-06-06 14:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 14:54 [PATCH 0/2] spi: dw: Add compatible for Intel Mount Evans SoC Abe Kohandel
2023-06-06 14:54 ` Abe Kohandel [this message]
2023-06-06 17:28 ` [PATCH 1/2] " Serge Semin
2023-06-06 19:07 ` Abe Kohandel
2023-06-06 19:13 ` Serge Semin
2023-06-06 23:21 ` Abe Kohandel
2023-06-06 14:54 ` [PATCH 2/2] dt-bindings: spi: snps,dw-apb-ssi: " Abe Kohandel
2023-06-06 16:24 ` [PATCH 0/2] spi: dw: " Mark Brown
2023-06-06 16:40 ` Serge Semin
2023-06-06 16:47 ` Mark Brown
2023-06-06 17:33 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230606145402.474866-2-abe.kohandel@intel.com \
--to=abe.kohandel@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox