From: Chen-Yu Tsai <wenst@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH 2/4] arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling
Date: Wed, 7 Jun 2023 17:06:50 +0800 [thread overview]
Message-ID: <20230607090653.2468317-3-wenst@chromium.org> (raw)
In-Reply-To: <20230607090653.2468317-1-wenst@chromium.org>
This adds clocks, dynamic power coefficients, and OPP tables for the CPU
cores, so that everything required at the SoC level for CPU freqency and
voltage scaling is available.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 274 +++++++++++++++++++++++
1 file changed, 274 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 1b754f7a0725..6735c1feb26d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -136,6 +136,240 @@ cci_opp_15: opp-1400000000 {
};
};
+ cluster0_opp: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <600000>;
+ opp-level = <15>;
+ required-opps = <&cci_opp_0>;
+ };
+
+ opp-774000000 {
+ opp-hz = /bits/ 64 <774000000>;
+ opp-microvolt = <675000>;
+ opp-level = <14>;
+ required-opps = <&cci_opp_1>;
+ };
+
+ opp-875000000 {
+ opp-hz = /bits/ 64 <875000000>;
+ opp-microvolt = <700000>;
+ opp-level = <13>;
+ required-opps = <&cci_opp_2>;
+ };
+
+ opp-975000000 {
+ opp-hz = /bits/ 64 <975000000>;
+ opp-microvolt = <725000>;
+ opp-level = <12>;
+ required-opps = <&cci_opp_3>;
+ };
+
+ opp-1075000000 {
+ opp-hz = /bits/ 64 <1075000000>;
+ opp-microvolt = <750000>;
+ opp-level = <11>;
+ required-opps = <&cci_opp_4>;
+ };
+
+ opp-1175000000 {
+ opp-hz = /bits/ 64 <1175000000>;
+ opp-microvolt = <775000>;
+ opp-level = <10>;
+ required-opps = <&cci_opp_5>;
+ };
+
+ opp-1275000000 {
+ opp-hz = /bits/ 64 <1275000000>;
+ opp-microvolt = <800000>;
+ opp-level = <9>;
+ required-opps = <&cci_opp_6>;
+ };
+
+ opp-1375000000 {
+ opp-hz = /bits/ 64 <1375000000>;
+ opp-microvolt = <825000>;
+ opp-level = <8>;
+ required-opps = <&cci_opp_7>;
+ };
+
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <856250>;
+ opp-level = <7>;
+ required-opps = <&cci_opp_8>;
+ };
+
+ opp-1618000000 {
+ opp-hz = /bits/ 64 <1618000000>;
+ opp-microvolt = <875000>;
+ opp-level = <6>;
+ required-opps = <&cci_opp_9>;
+ };
+
+ opp-1666000000 {
+ opp-hz = /bits/ 64 <1666000000>;
+ opp-microvolt = <900000>;
+ opp-level = <5>;
+ required-opps = <&cci_opp_10>;
+ };
+
+ opp-1733000000 {
+ opp-hz = /bits/ 64 <1733000000>;
+ opp-microvolt = <925000>;
+ opp-level = <4>;
+ required-opps = <&cci_opp_11>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <950000>;
+ opp-level = <3>;
+ required-opps = <&cci_opp_12>;
+ };
+
+ opp-1866000000 {
+ opp-hz = /bits/ 64 <1866000000>;
+ opp-microvolt = <981250>;
+ opp-level = <2>;
+ required-opps = <&cci_opp_13>;
+ };
+
+ opp-1933000000 {
+ opp-hz = /bits/ 64 <1933000000>;
+ opp-microvolt = <1006250>;
+ opp-level = <1>;
+ required-opps = <&cci_opp_14>;
+ };
+
+ opp-2000000000 {
+ opp-hz = /bits/ 64 <2000000000>;
+ opp-microvolt = <1031250>;
+ opp-level = <0>;
+ required-opps = <&cci_opp_15>;
+ };
+ };
+
+ cluster1_opp: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-774000000 {
+ opp-hz = /bits/ 64 <774000000>;
+ opp-microvolt = <675000>;
+ opp-level = <15>;
+ required-opps = <&cci_opp_0>;
+ };
+
+ opp-835000000 {
+ opp-hz = /bits/ 64 <835000000>;
+ opp-microvolt = <693750>;
+ opp-level = <14>;
+ required-opps = <&cci_opp_1>;
+ };
+
+ opp-919000000 {
+ opp-hz = /bits/ 64 <919000000>;
+ opp-microvolt = <718750>;
+ opp-level = <13>;
+ required-opps = <&cci_opp_2>;
+ };
+
+ opp-1002000000 {
+ opp-hz = /bits/ 64 <1002000000>;
+ opp-microvolt = <743750>;
+ opp-level = <12>;
+ required-opps = <&cci_opp_3>;
+ };
+
+ opp-1085000000 {
+ opp-hz = /bits/ 64 <1085000000>;
+ opp-microvolt = <775000>;
+ opp-level = <11>;
+ required-opps = <&cci_opp_4>;
+ };
+
+ opp-1169000000 {
+ opp-hz = /bits/ 64 <1169000000>;
+ opp-microvolt = <800000>;
+ opp-level = <10>;
+ required-opps = <&cci_opp_5>;
+ };
+
+ opp-1308000000 {
+ opp-hz = /bits/ 64 <1308000000>;
+ opp-microvolt = <843750>;
+ opp-level = <9>;
+ required-opps = <&cci_opp_6>;
+ };
+
+ opp-1419000000 {
+ opp-hz = /bits/ 64 <1419000000>;
+ opp-microvolt = <875000>;
+ opp-level = <8>;
+ required-opps = <&cci_opp_7>;
+ };
+
+ opp-1530000000 {
+ opp-hz = /bits/ 64 <1530000000>;
+ opp-microvolt = <912500>;
+ opp-level = <7>;
+ required-opps = <&cci_opp_8>;
+ };
+
+ opp-1670000000 {
+ opp-hz = /bits/ 64 <1670000000>;
+ opp-microvolt = <956250>;
+ opp-level = <6>;
+ required-opps = <&cci_opp_9>;
+ };
+
+ opp-1733000000 {
+ opp-hz = /bits/ 64 <1733000000>;
+ opp-microvolt = <981250>;
+ opp-level = <5>;
+ required-opps = <&cci_opp_10>;
+ };
+
+ opp-1796000000 {
+ opp-hz = /bits/ 64 <1796000000>;
+ opp-microvolt = <1012500>;
+ opp-level = <4>;
+ required-opps = <&cci_opp_11>;
+ };
+
+ opp-1860000000 {
+ opp-hz = /bits/ 64 <1860000000>;
+ opp-microvolt = <1037500>;
+ opp-level = <3>;
+ required-opps = <&cci_opp_12>;
+ };
+
+ opp-1923000000 {
+ opp-hz = /bits/ 64 <1923000000>;
+ opp-microvolt = <1062500>;
+ opp-level = <2>;
+ required-opps = <&cci_opp_13>;
+ };
+
+ cluster1_opp_14: opp-1986000000 {
+ opp-hz = /bits/ 64 <1986000000>;
+ opp-microvolt = <1093750>;
+ opp-level = <1>;
+ required-opps = <&cci_opp_14>;
+ };
+
+ cluster1_opp_15: opp-2050000000 {
+ opp-hz = /bits/ 64 <2050000000>;
+ opp-microvolt = <1118750>;
+ opp-level = <0>;
+ required-opps = <&cci_opp_15>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -182,6 +416,11 @@ cpu0: cpu@0 {
reg = <0x000>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -201,6 +440,11 @@ cpu1: cpu@100 {
reg = <0x100>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -220,6 +464,11 @@ cpu2: cpu@200 {
reg = <0x200>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -239,6 +488,11 @@ cpu3: cpu@300 {
reg = <0x300>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -258,6 +512,11 @@ cpu4: cpu@400 {
reg = <0x400>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -277,6 +536,11 @@ cpu5: cpu@500 {
reg = <0x500>;
enable-method = "psci";
clock-frequency = <2000000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster0_opp>;
+ dynamic-power-coefficient = <84>;
capacity-dmips-mhz = <382>;
cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
i-cache-size = <32768>;
@@ -296,6 +560,11 @@ cpu6: cpu@600 {
reg = <0x600>;
enable-method = "psci";
clock-frequency = <2050000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
+ dynamic-power-coefficient = <335>;
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
i-cache-size = <65536>;
@@ -315,6 +584,11 @@ cpu7: cpu@700 {
reg = <0x700>;
enable-method = "psci";
clock-frequency = <2050000000>;
+ clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cluster1_opp>;
+ dynamic-power-coefficient = <335>;
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
i-cache-size = <65536>;
--
2.41.0.rc0.172.g3f132b7071-goog
next prev parent reply other threads:[~2023-06-07 9:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-07 9:06 [PATCH 0/4] arm64: dts: mediatek: mt8186: More DVFS nodes Chen-Yu Tsai
2023-06-07 9:06 ` [PATCH 1/4] arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table Chen-Yu Tsai
2023-06-08 14:17 ` AngeloGioacchino Del Regno
2023-06-07 9:06 ` Chen-Yu Tsai [this message]
2023-06-08 14:18 ` [PATCH 2/4] arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling AngeloGioacchino Del Regno
2023-06-09 6:51 ` Chen-Yu Tsai
2023-06-07 9:06 ` [PATCH 3/4] arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells Chen-Yu Tsai
2023-06-08 14:19 ` AngeloGioacchino Del Regno
2023-06-07 9:06 ` [PATCH 4/4] arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling Chen-Yu Tsai
2023-06-08 12:13 ` AngeloGioacchino Del Regno
2023-06-09 6:54 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230607090653.2468317-3-wenst@chromium.org \
--to=wenst@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).