devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wenst@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH 4/4] arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling
Date: Wed,  7 Jun 2023 17:06:52 +0800	[thread overview]
Message-ID: <20230607090653.2468317-5-wenst@chromium.org> (raw)
In-Reply-To: <20230607090653.2468317-1-wenst@chromium.org>

Add the GPU's OPP table. This is from the downstream ChromeOS kernel,
adapted to the new upstream opp-supported-hw binning format. Also add
dynamic-power-coefficient for the GPU.

Also add label for mfg1 power domain. This is to be used at the board
level to add a regulator supply for the power domain.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8186.dtsi | 140 ++++++++++++++++++++++-
 1 file changed, 139 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index c58d7eb87b1d..a34489e27cd4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -695,6 +695,142 @@ clk32k: oscillator-32k {
 		clock-output-names = "clk32k";
 	};
 
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-299000000 {
+			opp-hz = /bits/ 64 <299000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-332000000 {
+			opp-hz = /bits/ 64 <332000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-366000000 {
+			opp-hz = /bits/ 64 <366000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <643750>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-434000000 {
+			opp-hz = /bits/ 64 <434000000>;
+			opp-microvolt = <656250>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-484000000 {
+			opp-hz = /bits/ 64 <484000000>;
+			opp-microvolt = <668750>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-535000000 {
+			opp-hz = /bits/ 64 <535000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-586000000 {
+			opp-hz = /bits/ 64 <586000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-637000000 {
+			opp-hz = /bits/ 64 <637000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-690000000 {
+			opp-hz = /bits/ 64 <690000000>;
+			opp-microvolt = <737500>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <756250>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-796000000 {
+			opp-hz = /bits/ 64 <796000000>;
+			opp-microvolt = <781250>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0x38>;
+		};
+
+		opp-900000000-3 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-900000000-4 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <837500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-900000000-5 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <825000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-950000000-3 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <900000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-950000000-4 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-1000000000-3 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-1000000000-4 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <912500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-1000000000-5 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x30>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupt-parent = <&gic>;
@@ -813,7 +949,7 @@ mfg0: power-domain@MT8186_POWER_DOMAIN_MFG0 {
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8186_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8186_POWER_DOMAIN_MFG1 {
 						reg = <MT8186_POWER_DOMAIN_MFG1>;
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
@@ -1606,6 +1742,8 @@ gpu: gpu@13040000 {
 			#cooling-cells = <2>;
 			nvmem-cells = <&gpu_speedbin>;
 			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			dynamic-power-coefficient = <4687>;
 			status = "disabled";
 		};
 
-- 
2.41.0.rc0.172.g3f132b7071-goog


  parent reply	other threads:[~2023-06-07  9:08 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-07  9:06 [PATCH 0/4] arm64: dts: mediatek: mt8186: More DVFS nodes Chen-Yu Tsai
2023-06-07  9:06 ` [PATCH 1/4] arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table Chen-Yu Tsai
2023-06-08 14:17   ` AngeloGioacchino Del Regno
2023-06-07  9:06 ` [PATCH 2/4] arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling Chen-Yu Tsai
2023-06-08 14:18   ` AngeloGioacchino Del Regno
2023-06-09  6:51     ` Chen-Yu Tsai
2023-06-07  9:06 ` [PATCH 3/4] arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells Chen-Yu Tsai
2023-06-08 14:19   ` AngeloGioacchino Del Regno
2023-06-07  9:06 ` Chen-Yu Tsai [this message]
2023-06-08 12:13   ` [PATCH 4/4] arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling AngeloGioacchino Del Regno
2023-06-09  6:54     ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230607090653.2468317-5-wenst@chromium.org \
    --to=wenst@chromium.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).