[PATCH v1 0/6] arm64: dts: meson: a1: introduce several peripheral IPs

[Dmitry Rokosov <ddrokosov@sberdevices.ru>]

This patch series introduces device tree declarations for various
peripheral IPs of the A1 SoC family, including clock controllers, EFUSE,
USB, SPI Flash Controller, SDIO, and UART_AO:
    - CLK: A1 SoC has four types on the board, namely PLL, Peripherals,
      CPU, and Audio, but only Amlogic A1 PLL and Peripherals clock
      controllers are currently supported.
    - EFUSE: consists of a 4k bit One Time Programmable (OTP) memory
      divided into 32 128-bit blocks, and data is accessed using the APB
      bus through software or the Key-ladder integrated with the EFUSE
      block.
    - USB: only one USB 2.0 high-speed port is available in the A1 SoC,
      supporting both HOST and DEVICE modes for OTG.
    - SPI Flash Controller: 4-bit QPI/SPI NOR Flash or NAND FLASH
      controller.
    - SDIO: for WiFi/IEEE802.11 connection.
    - UART_AO: for Bluetooth connection.

Alexey Romanov (1):
  arm64: dts: meson: a1: enable efuse controller and setup its clk

Dmitry Rokosov (2):
  arm64: dts: meson: a1: introduce PLL and Peripherals clk controllers
  arm64: dts: meson: a1: support USB controller in OTG mode

Jan Dakinevich (1):
  arm64: dts: meson: a1: add eMMC controller and its pins

Martin Kurbanov (1):
  arm64: dts: meson: a1: introduce SPI Flash Controller

Oleg Lyovin (1):
  arm64: dts: meson: a1: introduce UART_AO mux definitions

 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 164 ++++++++++++++++++++++
 1 file changed, 164 insertions(+)

-- 
2.36.0