From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V3 1/3] arm64: dts: imx8mn-beacon: Add HDMI video with sound
Date: Sat, 10 Jun 2023 14:26:34 -0500 [thread overview]
Message-ID: <20230610192637.263600-2-aford173@gmail.com> (raw)
In-Reply-To: <20230610192637.263600-1-aford173@gmail.com>
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1392ce02587b..442ff2960677 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -16,4 +16,137 @@ / {
chosen {
stdout-path = &uart2;
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+
+ reg_hdmi: regulator-hdmi-dvdd {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_hdmi>;
+ regulator-name = "hdmi_pwr_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ regulator-always-on;
+ };
+
+ sound-hdmi {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sound-hdmi";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai5 0>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&adv_bridge>;
+ };
+ };
+};
+
+&i2c2 {
+ adv_bridge: hdmi@3d {
+ compatible = "adi,adv7535";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_bridge>;
+ reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+ reg-names = "main", "cec", "edid", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <®_hdmi>;
+ a2vdd-supply = <®_hdmi>;
+ dvdd-supply = <®_hdmi>;
+ pvdd-supply = <®_hdmi>;
+ v1p2-supply = <®_hdmi>;
+ v3p3-supply = <®_hdmi>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&lcdif {
+ assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+ assigned-clock-rates = <594000000>;
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <20000000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+};
+
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hdmi_bridge: hdmibridgegrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_reg_hdmi: reghdmigrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16
+ >;
+ };
+
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
+ >;
+ };
};
--
2.39.2
next prev parent reply other threads:[~2023-06-10 19:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-10 19:26 [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
2023-06-10 19:26 ` Adam Ford [this message]
2023-06-10 19:26 ` [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address Adam Ford
2023-06-10 19:26 ` [PATCH V3 3/3] arm64: dts: imx8mm-beacon: Add HDMI video with sound Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230610192637.263600-2-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).