* [PATCH V3 1/3] arm64: dts: imx8mn-beacon: Add HDMI video with sound
2023-06-10 19:26 [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
@ 2023-06-10 19:26 ` Adam Ford
2023-06-10 19:26 ` [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address Adam Ford
2023-06-10 19:26 ` [PATCH V3 3/3] arm64: dts: imx8mm-beacon: Add HDMI video with sound Adam Ford
2 siblings, 0 replies; 4+ messages in thread
From: Adam Ford @ 2023-06-10 19:26 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1392ce02587b..442ff2960677 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -16,4 +16,137 @@ / {
chosen {
stdout-path = &uart2;
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+
+ reg_hdmi: regulator-hdmi-dvdd {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_hdmi>;
+ regulator-name = "hdmi_pwr_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ regulator-always-on;
+ };
+
+ sound-hdmi {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sound-hdmi";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai5 0>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&adv_bridge>;
+ };
+ };
+};
+
+&i2c2 {
+ adv_bridge: hdmi@3d {
+ compatible = "adi,adv7535";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_bridge>;
+ reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+ reg-names = "main", "cec", "edid", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <®_hdmi>;
+ a2vdd-supply = <®_hdmi>;
+ dvdd-supply = <®_hdmi>;
+ pvdd-supply = <®_hdmi>;
+ v1p2-supply = <®_hdmi>;
+ v3p3-supply = <®_hdmi>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&lcdif {
+ assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+ assigned-clock-rates = <594000000>;
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <20000000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+};
+
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hdmi_bridge: hdmibridgegrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_reg_hdmi: reghdmigrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16
+ >;
+ };
+
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
+ >;
+ };
};
--
2.39.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address
2023-06-10 19:26 [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
2023-06-10 19:26 ` [PATCH V3 1/3] arm64: dts: imx8mn-beacon: Add HDMI video with sound Adam Ford
@ 2023-06-10 19:26 ` Adam Ford
2023-06-10 19:26 ` [PATCH V3 3/3] arm64: dts: imx8mm-beacon: Add HDMI video with sound Adam Ford
2 siblings, 0 replies; 4+ messages in thread
From: Adam Ford @ 2023-06-10 19:26 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bc531175ff76..d5c6fc68d656 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -141,11 +141,11 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- camera@3c {
+ camera@10 {
compatible = "ovti,ov5640";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5640>;
- reg = <0x3c>;
+ reg = <0x10>;
clocks = <&clk IMX8MM_CLK_CLKO1>;
clock-names = "xclk";
assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
--
2.39.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH V3 3/3] arm64: dts: imx8mm-beacon: Add HDMI video with sound
2023-06-10 19:26 [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
2023-06-10 19:26 ` [PATCH V3 1/3] arm64: dts: imx8mn-beacon: Add HDMI video with sound Adam Ford
2023-06-10 19:26 ` [PATCH V3 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address Adam Ford
@ 2023-06-10 19:26 ` Adam Ford
2 siblings, 0 replies; 4+ messages in thread
From: Adam Ford @ 2023-06-10 19:26 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
The Beacon Embedded imx8mm development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plugging.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 74a7b0cc10c2..66d68ce98ca4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -16,4 +16,135 @@ / {
chosen {
stdout-path = &uart2;
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+
+ reg_hdmi: regulator-hdmi-dvdd {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_hdmi>;
+ regulator-name = "hdmi_pwr_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ regulator-always-on;
+ };
+
+ sound-hdmi {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sound-hdmi";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai5 0>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&adv_bridge>;
+ };
+ };
+};
+
+&i2c2 {
+ adv_bridge: hdmi@3d {
+ compatible = "adi,adv7535";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_bridge>;
+ reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+ reg-names = "main", "cec", "edid", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <®_hdmi>;
+ a2vdd-supply = <®_hdmi>;
+ dvdd-supply = <®_hdmi>;
+ pvdd-supply = <®_hdmi>;
+ v1p2-supply = <®_hdmi>;
+ v3p3-supply = <®_hdmi>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <20000000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+};
+
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hdmi_bridge: hdmibridgegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_reg_hdmi: reghdmigrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16
+ >;
+ };
+
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
+ >;
+ };
};
--
2.39.2
^ permalink raw reply related [flat|nested] 4+ messages in thread