From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
Date: Wed, 14 Jun 2023 14:11:47 +0200 [thread overview]
Message-ID: <20230614-topic-edo_pinsgpiopmic-v1-2-cf88a0bac26c@linaro.org> (raw)
In-Reply-To: <20230614-topic-edo_pinsgpiopmic-v1-0-cf88a0bac26c@linaro.org>
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
pm8009_gpios
< "CAM_PWR_LD_EN",
> "NC",
pm8150_gpios
< "NC",
> "G_ASSIST_N",
< "WLC_EN_N", /* GPIO_10 */
> "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 50 ++++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 50 ++++++++++++++++++++++
2 files changed, 100 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 84104d2b2010..62590c6bd306 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -15,6 +15,56 @@ / {
/delete-node/ &vreg_l7f_1p8;
+&pm8009_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "CAM_PWR_LD_EN",
+ "WIDEC_PWR_EN",
+ "NC";
+};
+
+&pm8150_gpios {
+ gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+ "OPTION_2",
+ "NC",
+ "PM_SLP_CLK_IN",
+ "OPTION_1",
+ "NC",
+ "NC",
+ "SP_ARI_PWR_ALARM",
+ "NC",
+ "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+ gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+ "FOCUS_N",
+ "NC",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "LCD_ID",
+ "NC",
+ "WLC_EN_N", /* GPIO_10 */
+ "NC",
+ "RF_ID";
+};
+
+&pm8150l_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "PM3003A_EN",
+ "NC",
+ "NC",
+ "NC",
+ "AUX2_THERM",
+ "BB_HP_EN",
+ "FP_LDO_EN",
+ "PMX_RESET_N",
+ "AUX3_THERM", /* GPIO_10 */
+ "DTV_PWR_EN",
+ "PM3003A_MODE";
+};
+
&tlmm {
gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
"MDM2AP_ERR_FATAL",
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index fae6568cb79e..ea4571bf4fbf 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,56 @@ g-assist-key {
};
};
+&pm8009_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "WIDEC_PWR_EN",
+ "NC";
+};
+
+&pm8150_gpios {
+ gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+ "OPTION_2",
+ "NC",
+ "PM_SLP_CLK_IN",
+ "OPTION_1",
+ "G_ASSIST_N",
+ "NC",
+ "SP_ARI_PWR_ALARM",
+ "NC",
+ "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+ gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+ "FOCUS_N",
+ "NC",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "LCD_ID",
+ "NC",
+ "NC", /* GPIO_10 */
+ "NC",
+ "RF_ID";
+};
+
+&pm8150l_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "PM3003A_EN",
+ "NC",
+ "NC",
+ "NC",
+ "AUX2_THERM",
+ "BB_HP_EN",
+ "FP_LDO_EN",
+ "PMX_RESET_N",
+ "NC", /* GPIO_10 */
+ "NC",
+ "PM3003A_MODE";
+};
+
&tlmm {
gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
"MDM2AP_ERR_FATAL",
--
2.41.0
next prev parent reply other threads:[~2023-06-14 12:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-14 12:11 [PATCH 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio
2023-06-14 12:11 ` [PATCH 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM Konrad Dybcio
2023-06-14 12:11 ` Konrad Dybcio [this message]
2023-06-14 12:11 ` [PATCH 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC Konrad Dybcio
2023-06-14 12:11 ` [PATCH 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys Konrad Dybcio
2023-06-14 12:27 ` Marijn Suijten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230614-topic-edo_pinsgpiopmic-v1-2-cf88a0bac26c@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).