* [PATCH v2 0/4] SM8250 Edo pins, keys & pmic
@ 2023-06-20 11:05 Konrad Dybcio
2023-06-20 11:05 ` [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM Konrad Dybcio
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Konrad Dybcio @ 2023-06-20 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel,
Konrad Dybcio, Konrad Dybcio
This series brings fixes to the GPIO buttons, adds gpio-line-names and
introduces the SLG51000 camera on Xperia Edo devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes in v2:
- Fix the Fixes tag in patch 4
- Pick up tags
- Link to v1: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v1-0-cf88a0bac26c@linaro.org
---
Konrad Dybcio (4):
arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 364 +++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 243 ++++++++++++++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 61 +++-
3 files changed, 655 insertions(+), 13 deletions(-)
---
base-commit: 9dbf40840551df336c95ce2a3adbdd25ed53c0ef
change-id: 20230614-topic-edo_pinsgpiopmic-df8bd6f1b6db
Best regards,
--
Konrad Dybcio <konrad.dybcio@linaro.org>
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio @ 2023-06-20 11:05 ` Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs Konrad Dybcio ` (3 subsequent siblings) 4 siblings, 0 replies; 6+ messages in thread From: Konrad Dybcio @ 2023-06-20 11:05 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio, Konrad Dybcio Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX203&206 DTSIs to better document the hardware. Diff between 203 and 206: < "CAM_PWR_A_CS", > "FRONTC_PWR_EN", < "CAM4_MCLK", < "TOF_RST_N", > "NC", > "NC", < "WLC_I2C_SDA", < "WLC_I2C_SCL", /* GPIO_120 */ > "NC", > "NC", < "WLC_INT_N", > "NC", Which makes sense, as 203 has a 3D iToF, slightly different camera power wiring and WLC (WireLess Charging). Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 183 +++++++++++++++++++++ .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 183 +++++++++++++++++++++ 2 files changed, 366 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 356a81698731..84104d2b2010 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -14,3 +14,186 @@ / { }; /delete-node/ &vreg_l7f_1p8; + +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "CAM_PWR_A_CS", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "CAM4_MCLK", + "TOF_RST_N", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "WLC_I2C_SDA", + "WLC_I2C_SCL", /* GPIO_120 */ + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "WLC_INT_N", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 01fe3974ee72..fae6568cb79e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -30,6 +30,189 @@ g-assist-key { }; }; +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "FRONTC_PWR_EN", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "NC", + "NC", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; + &vreg_l2f_1p3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; -- 2.41.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM Konrad Dybcio @ 2023-06-20 11:05 ` Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC Konrad Dybcio ` (2 subsequent siblings) 4 siblings, 0 replies; 6+ messages in thread From: Konrad Dybcio @ 2023-06-20 11:05 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio, Konrad Dybcio Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX203&206 DTSIs to better document the hardware. Diff between 203 and 206: pm8009_gpios < "CAM_PWR_LD_EN", > "NC", pm8150_gpios < "NC", > "G_ASSIST_N", < "WLC_EN_N", /* GPIO_10 */ > "NC", /* GPIO_10 */ Which is due to 5 II having an additional Google Assistant hardware button and 1 II having a wireless charger & different camera wiring to accommodate the additional 3D iToF sensor. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 50 ++++++++++++++++++++++ .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 50 ++++++++++++++++++++++ 2 files changed, 100 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 84104d2b2010..62590c6bd306 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -15,6 +15,56 @@ / { /delete-node/ &vreg_l7f_1p8; +&pm8009_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "CAM_PWR_LD_EN", + "WIDEC_PWR_EN", + "NC"; +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "OPTION_2", + "NC", + "PM_SLP_CLK_IN", + "OPTION_1", + "NC", + "NC", + "SP_ARI_PWR_ALARM", + "NC", + "NC"; /* GPIO_10 */ +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "LCD_ID", + "NC", + "WLC_EN_N", /* GPIO_10 */ + "NC", + "RF_ID"; +}; + +&pm8150l_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "PM3003A_EN", + "NC", + "NC", + "NC", + "AUX2_THERM", + "BB_HP_EN", + "FP_LDO_EN", + "PMX_RESET_N", + "AUX3_THERM", /* GPIO_10 */ + "DTV_PWR_EN", + "PM3003A_MODE"; +}; + &tlmm { gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ "MDM2AP_ERR_FATAL", diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index fae6568cb79e..ea4571bf4fbf 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -30,6 +30,56 @@ g-assist-key { }; }; +&pm8009_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "WIDEC_PWR_EN", + "NC"; +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "OPTION_2", + "NC", + "PM_SLP_CLK_IN", + "OPTION_1", + "G_ASSIST_N", + "NC", + "SP_ARI_PWR_ALARM", + "NC", + "NC"; /* GPIO_10 */ +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "LCD_ID", + "NC", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; +}; + +&pm8150l_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "PM3003A_EN", + "NC", + "NC", + "NC", + "AUX2_THERM", + "BB_HP_EN", + "FP_LDO_EN", + "PMX_RESET_N", + "NC", /* GPIO_10 */ + "NC", + "PM3003A_MODE"; +}; + &tlmm { gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ "MDM2AP_ERR_FATAL", -- 2.41.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs Konrad Dybcio @ 2023-06-20 11:05 ` Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys Konrad Dybcio 2023-07-10 5:07 ` [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Bjorn Andersson 4 siblings, 0 replies; 6+ messages in thread From: Konrad Dybcio @ 2023-06-20 11:05 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio, Konrad Dybcio Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera sensors. Add the required nodes to support it and remove its remnants from -edo.dtsi, as it's absent on 5 II. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 131 +++++++++++++++++++++ .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 7 -- 2 files changed, 131 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 62590c6bd306..f4c4575eb03b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -15,6 +15,123 @@ / { /delete-node/ &vreg_l7f_1p8; +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_s1f_1p2>; + vin6-supply = <&vreg_s1f_1p2>; + + pinctrl-0 = <&cam_pwr_b_cs>; + pinctrl-names = "default"; + + regulators { + slg51000_1_ldo1: ldo1 { + regulator-name = "slg51000_b_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_1_ldo2: ldo2 { + regulator-name = "slg51000_b_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_1_ldo3: ldo3 { + regulator-name = "slg51000_b_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_1_ldo4: ldo4 { + regulator-name = "slg51000_b_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_1_ldo5: ldo5 { + regulator-name = "slg51000_b_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_1_ldo6: ldo6 { + regulator-name = "slg51000_b_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_1_ldo7: ldo7 { + regulator-name = "slg51000_b_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&i2c15 { + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_l2f_1p3>; + vin6-supply = <&vreg_l2f_1p3>; + + pinctrl-0 = <&cam_pwr_a_cs>; + pinctrl-names = "default"; + + regulators { + slg51000_0_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_0_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_0_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_0_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_0_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_0_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_0_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + &pm8009_gpios { gpio-line-names = "NC", /* GPIO_1 */ "CAM_PWR_LD_EN", @@ -246,4 +363,18 @@ &tlmm { "HST_BLE_SNS_UART6_RX", "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + + cam_pwr_b_cs: cam-pwr-b-state { + pins = "gpio69"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + cam_pwr_a_cs: cam-pwr-a-state { + pins = "gpio71"; + drive-strength = <2>; + bias-disable; + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 8ab82bacba81..70da10fb9d9d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -486,13 +486,6 @@ cs35l41_r: speaker-amp@41 { }; }; -&i2c5 { - status = "okay"; - clock-frequency = <400000>; - - /* Dialog SLG51000 CMIC @ 75 */ -}; - &i2c9 { status = "okay"; clock-frequency = <400000>; -- 2.41.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio ` (2 preceding siblings ...) 2023-06-20 11:05 ` [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC Konrad Dybcio @ 2023-06-20 11:05 ` Konrad Dybcio 2023-07-10 5:07 ` [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Bjorn Andersson 4 siblings, 0 replies; 6+ messages in thread From: Konrad Dybcio @ 2023-06-20 11:05 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio, Konrad Dybcio Set up the corresponding GPIOs properly and add the leftover hardware buttons to mark this piece of the puzzle complete. Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 10 ++++ .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 54 +++++++++++++++++++--- 2 files changed, 58 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index ea4571bf4fbf..58a521046f5f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -20,6 +20,8 @@ &framebuffer { }; &gpio_keys { + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + g-assist-key { label = "Google Assistant Key"; linux,code = <KEY_LEFTMETA>; @@ -48,6 +50,14 @@ &pm8150_gpios { "SP_ARI_PWR_ALARM", "NC", "NC"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; }; &pm8150b_gpios { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 70da10fb9d9d..897b97db819e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -51,12 +51,26 @@ framebuffer: framebuffer@9c000000 { gpio_keys: gpio-keys { compatible = "gpio-keys"; - /* - * Camera focus (light press) and camera snapshot (full press) - * seem not to work properly.. Adding the former one stalls the CPU - * and the latter kills the volume down key for whatever reason. In any - * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). - */ + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; key-vol-down { label = "Volume Down"; @@ -544,6 +558,34 @@ &pcie2_phy { vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pm8150_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; }; -- 2.41.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/4] SM8250 Edo pins, keys & pmic 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio ` (3 preceding siblings ...) 2023-06-20 11:05 ` [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys Konrad Dybcio @ 2023-07-10 5:07 ` Bjorn Andersson 4 siblings, 0 replies; 6+ messages in thread From: Bjorn Andersson @ 2023-07-10 5:07 UTC (permalink / raw) To: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio On Tue, 20 Jun 2023 13:05:33 +0200, Konrad Dybcio wrote: > This series brings fixes to the GPIO buttons, adds gpio-line-names and > introduces the SLG51000 camera on Xperia Edo devices. > > Applied, thanks! [1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM commit: 40b398beabdfe0e9088b13976e56b1dc706fe851 [2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs commit: 6b8a63350752c6a5e4b54f2de6174084652cd3cd [3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC commit: 2de55db6bca0856ecbff5c288dc330af94c8e5b1 [4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys commit: a422c6a91a667b309ca1a6c08b30dbfcf7d4e866 Best regards, -- Bjorn Andersson <andersson@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-07-10 5:07 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC Konrad Dybcio 2023-06-20 11:05 ` [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys Konrad Dybcio 2023-07-10 5:07 ` [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).