[PATCH v2 00/23] arm64: qcom: sa8775p-ride: enable the first ethernet port

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There are three ethernet ports on sa8775p-ride. This series contains changes
required to enable one of the two 1Gb ports (the third one is 10Gb). We need
to add a new driver for the internal SerDes PHY, introduce several extensions
to the MAC driver (while at it: tweak coding style a bit etc.) and finally
add the relevant DT nodes.

v1 -> v2:
- move the phy-supply property from the MAC driver over to the SerDes PHY
  driver
- rework the SerDes PHY driver to work with the correct ordering of phy
  operations (init -> power_on -> set_speed)
- change the serdes_phy node label to serdes0 to be in line with other DT
  sources and make it ready for the second PHY instance
- dropped the status property from the example in SerDes PHY's DT bindings
  and moved properties around
- reworked the fourth clock in the ethqos driver: it's handled the same
  whether it's called rgmii or phyaux
- other minor tweaks
- use 0x0 consistently in DT
- squash dwmac and ethqos-specific bindings changes
- collected tags

Bartosz Golaszewski (23):
  phy: qualcomm: fix indentation in Makefile
  dt-bindings: phy: describe the Qualcomm SGMII PHY
  phy: qcom: add the SGMII SerDes PHY driver
  arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
  net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
  net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
  net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
  net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
  net: stmmac: dwmac-qcom-ethqos: add missing include
  net: stmmac: dwmac-qcom-ethqos: add a newline between headers
  net: stmmac: dwmac-qcom-ethqos: remove stray space
  net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes
    phy
  net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clock
  net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
  net: stmmac: dwmac-qcom-ethqos: add support for SGMII
  net: stmmac: add new switch to struct plat_stmmacenet_data
  dt-bindings: net: qcom,ethqos: add description for sa8775p
  net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p
    platforms
  arm64: dts: qcom: sa8775p: add the SGMII PHY node
  arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
  arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
  arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
  arm64: dts: qcom: sa8775p-ride: enable ethernet0

 .../devicetree/bindings/net/qcom,ethqos.yaml  |  12 +-
 .../devicetree/bindings/net/snps,dwmac.yaml   |   3 +
 .../phy/qcom,sa8775p-dwmac-sgmii-phy.yaml     |  55 +++
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     | 109 +++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         |  42 ++
 arch/arm64/configs/defconfig                  |   1 +
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 284 ++++++++---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |   2 +-
 drivers/phy/qualcomm/Kconfig                  |   9 +
 drivers/phy/qualcomm/Makefile                 |   3 +-
 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c     | 451 ++++++++++++++++++
 include/linux/stmmac.h                        |   1 +
 12 files changed, 895 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c

-- 
2.39.2