From: Michael Walle <mwalle@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Michael Walle <michael@walle.cc>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Walle <mwalle@kernel.org>
Subject: [PATCH 3/3] ARM: dts: lan966x: kontron-d10: add PHY interrupts
Date: Fri, 16 Jun 2023 15:18:41 +0200 [thread overview]
Message-ID: <20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org> (raw)
In-Reply-To: <20230616-feature-d10-dt-cleanups-v1-0-50dd0452b8fe@kernel.org>
With interrupt handling fixed in the MaxLinear PHY driver, see commit
97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by
default"), we can finally add the correct interrupt description to the
device tree.
Signed-off-by: Michael Walle <mwalle@kernel.org>
---
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts | 2 ++
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 13 +++++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
index 5feef9a59a79..ad5d8b56e6fa 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -15,10 +15,12 @@ / {
&mdio0 {
phy2: ethernet-phy@3 {
reg = <3>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
};
phy3: ethernet-phy@4 {
reg = <4>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 2e16217ac88e..83a1c23887e7 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -49,6 +49,9 @@ spi3: spi@400 {
};
&gpio {
+ pinctrl-0 = <&phy_int_pins>;
+ pinctrl-names = "default";
+
fc3_b_pins: fc3-b-pins {
/* SCK, MISO, MOSI */
pins = "GPIO_51", "GPIO_52", "GPIO_53";
@@ -61,6 +64,12 @@ miim_c_pins: miim-c-pins {
function = "miim_c";
};
+ phy_int_pins: phy-int-pins {
+ /* PHY_INT# */
+ pins = "GPIO_24";
+ function = "gpio";
+ };
+
reset_pins: reset-pins {
/* SYS_RST# */
pins = "GPIO_56";
@@ -107,21 +116,25 @@ &mdio0 {
phy4: ethernet-phy@5 {
reg = <5>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy5: ethernet-phy@6 {
reg = <6>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy6: ethernet-phy@7 {
reg = <7>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy7: ethernet-phy@8 {
reg = <8>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
};
--
2.30.2
next prev parent reply other threads:[~2023-06-16 13:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 13:18 [PATCH 0/3] ARM: dts: lan966x: kontron-d10: device tree updates Michael Walle
2023-06-16 13:18 ` [PATCH 1/3] ARM: dts: lan966x: kontron-d10: fix board reset Michael Walle
2023-06-16 13:18 ` [PATCH 2/3] ARM: dts: lan966x: kontron-d10: fix SPI CS Michael Walle
2023-06-16 13:18 ` Michael Walle [this message]
2023-06-21 9:31 ` [PATCH 0/3] ARM: dts: lan966x: kontron-d10: device tree updates Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org \
--to=mwalle@kernel.org \
--cc=claudiu.beznea@microchip.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).