[PATCH v2 0/3] TQMa93xxLA support

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Hi,

this series adds initial support for TQMa93xxLA soldered on MBa93xxLA.
As the name indicates this is an i.MX93 based SBC board. The initial
support includes typical interfaces like UART, eMMC, I2C, Ethernet.
Support for USB, LVDS and PMIC is still pending, which require additional
patches.
Patch 1 adds the compatible to dt bindings
Patch 2 adds .dts[i] files for module and sbc board support
Patch 3 adds more i.MX93 drivers to arm64 defconfig

As the question occurred: xx in TQMa9xx is an actual wildcard indicating
the mounted SoC, while xx in MBa9xx is part of the regular name of the
mainboard.
There is an ordering number called MBa9352, but this is just indicating
the soldered module, the mainboard is still MBa93xx.

Changes in v2:
* Fix dt-bindings patch subject

Best regards,
Alexander

Alexander Stein (2):
  arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board
  arm64: defconfig: Enable i.MX93 devices

Markus Niebel (1):
  dt-bindings: arm: add TQMa93xxLA SOM

 .../devicetree/bindings/arm/fsl.yaml          |  19 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx93-tqma9352-mba93xxla.dts    | 629 ++++++++++++++++++
 .../boot/dts/freescale/imx93-tqma9352.dtsi    | 213 ++++++
 arch/arm64/configs/defconfig                  |   4 +
 5 files changed, 866 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi

-- 
2.34.1