* [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs
@ 2023-06-19 9:13 Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile Bartosz Golaszewski
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-06-19 9:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a new PHY driver and its DT bindings (reviewed by DT maintainers).
This is a sub-series of [1] with only the patches targetting the PHY subsystem
as they can go in independently.
[1] https://lore.kernel.org/lkml/20230617001644.4e093326@kernel.org/T/
Bartosz Golaszewski (3):
phy: qualcomm: fix indentation in Makefile
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qcom: add the SGMII SerDes PHY driver
.../phy/qcom,sa8775p-dwmac-sgmii-phy.yaml | 55 +++
drivers/phy/qualcomm/Kconfig | 9 +
drivers/phy/qualcomm/Makefile | 3 +-
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 451 ++++++++++++++++++
4 files changed, 517 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
--
2.39.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile
2023-06-19 9:13 [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Bartosz Golaszewski
@ 2023-06-19 9:13 ` Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY Bartosz Golaszewski
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-06-19 9:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Bartosz Golaszewski, Andrew Halaney
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Align all entries in Makefile.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
---
drivers/phy/qualcomm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index de3dc9ccf067..5fb33628566b 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -20,4 +20,4 @@ obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
--
2.39.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [RESEND PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY
2023-06-19 9:13 [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile Bartosz Golaszewski
@ 2023-06-19 9:13 ` Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 3/3] phy: qcom: add the SGMII SerDes PHY driver Bartosz Golaszewski
2023-06-21 12:15 ` [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Vinod Koul
3 siblings, 0 replies; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-06-19 9:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Bartosz Golaszewski, Krzysztof Kozlowski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Describe the SGMII/SerDes PHY present on the sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../phy/qcom,sa8775p-dwmac-sgmii-phy.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
new file mode 100644
index 000000000000..b9107759b2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+ The SerDes PHY sits between the MAC and the external PHY and provides
+ separate Rx Tx lines.
+
+properties:
+ compatible:
+ const: qcom,sa8775p-dwmac-sgmii-phy
+
+ reg:
+ items:
+ - description: serdes
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: sgmi_ref
+
+ phy-supply:
+ description:
+ Phandle to a regulator that provides power to the PHY.
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ serdes_phy: phy@8901000 {
+ compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+ reg = <0x08901000 0xe10>;
+ clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+ clock-names = "sgmi_ref";
+ #phy-cells = <0>;
+ };
--
2.39.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [RESEND PATCH v2 3/3] phy: qcom: add the SGMII SerDes PHY driver
2023-06-19 9:13 [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY Bartosz Golaszewski
@ 2023-06-19 9:13 ` Bartosz Golaszewski
2023-06-21 12:15 ` [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Vinod Koul
3 siblings, 0 replies; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-06-19 9:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-phy, devicetree, linux-kernel,
Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Implement support for the SGMII/SerDes PHY present on various Qualcomm
platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
drivers/phy/qualcomm/Kconfig | 9 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 451 ++++++++++++++++++++++
3 files changed, 461 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 67a45d95250d..97ca5952e34e 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -188,3 +188,12 @@ config PHY_QCOM_IPQ806X_USB
This option enables support for the Synopsis PHYs present inside the
Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
both HS and SS PHY controllers.
+
+config PHY_QCOM_SGMII_ETH
+ tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the internal SerDes/SGMII PHY on various
+ Qualcomm chipsets.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 5fb33628566b..b030858e0f8d 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
+obj-$(CONFIG_PHY_QCOM_SGMII_ETH) += phy-qcom-sgmii-eth.o
diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
new file mode 100644
index 000000000000..03dc753f0de1
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/ethtool.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define QSERDES_QMP_PLL 0x0
+#define QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 (QSERDES_QMP_PLL + 0x1ac)
+#define QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 (QSERDES_QMP_PLL + 0x1b0)
+#define QSERDES_COM_BIN_VCOCAL_HSCLK_SEL (QSERDES_QMP_PLL + 0x1bc)
+#define QSERDES_COM_CORE_CLK_EN (QSERDES_QMP_PLL + 0x174)
+#define QSERDES_COM_CORECLK_DIV_MODE0 (QSERDES_QMP_PLL + 0x168)
+#define QSERDES_COM_CP_CTRL_MODE0 (QSERDES_QMP_PLL + 0x74)
+#define QSERDES_COM_DEC_START_MODE0 (QSERDES_QMP_PLL + 0xbc)
+#define QSERDES_COM_DIV_FRAC_START1_MODE0 (QSERDES_QMP_PLL + 0xcc)
+#define QSERDES_COM_DIV_FRAC_START2_MODE0 (QSERDES_QMP_PLL + 0xd0)
+#define QSERDES_COM_DIV_FRAC_START3_MODE0 (QSERDES_QMP_PLL + 0xd4)
+#define QSERDES_COM_HSCLK_HS_SWITCH_SEL (QSERDES_QMP_PLL + 0x15c)
+#define QSERDES_COM_HSCLK_SEL (QSERDES_QMP_PLL + 0x158)
+#define QSERDES_COM_LOCK_CMP1_MODE0 (QSERDES_QMP_PLL + 0xac)
+#define QSERDES_COM_LOCK_CMP2_MODE0 (QSERDES_QMP_PLL + 0xb0)
+#define QSERDES_COM_PLL_CCTRL_MODE0 (QSERDES_QMP_PLL + 0x84)
+#define QSERDES_COM_PLL_IVCO (QSERDES_QMP_PLL + 0x58)
+#define QSERDES_COM_PLL_RCTRL_MODE0 (QSERDES_QMP_PLL + 0x7c)
+#define QSERDES_COM_SYSCLK_EN_SEL (QSERDES_QMP_PLL + 0x94)
+#define QSERDES_COM_VCO_TUNE1_MODE0 (QSERDES_QMP_PLL + 0x110)
+#define QSERDES_COM_VCO_TUNE2_MODE0 (QSERDES_QMP_PLL + 0x114)
+#define QSERDES_COM_VCO_TUNE_INITVAL2 (QSERDES_QMP_PLL + 0x124)
+#define QSERDES_COM_C_READY_STATUS (QSERDES_QMP_PLL + 0x178)
+#define QSERDES_COM_CMN_STATUS (QSERDES_QMP_PLL + 0x140)
+
+#define QSERDES_RX 0x600
+#define QSERDES_RX_UCDR_FO_GAIN (QSERDES_RX + 0x8)
+#define QSERDES_RX_UCDR_SO_GAIN (QSERDES_RX + 0x14)
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN (QSERDES_RX + 0x30)
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE (QSERDES_RX + 0x34)
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW (QSERDES_RX + 0x3c)
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH (QSERDES_RX + 0x40)
+#define QSERDES_RX_UCDR_PI_CONTROLS (QSERDES_RX + 0x44)
+#define QSERDES_RX_UCDR_PI_CTRL2 (QSERDES_RX + 0x48)
+#define QSERDES_RX_RX_TERM_BW (QSERDES_RX + 0x80)
+#define QSERDES_RX_VGA_CAL_CNTRL2 (QSERDES_RX + 0xd8)
+#define QSERDES_RX_GM_CAL (QSERDES_RX + 0xdc)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1 (QSERDES_RX + 0xe8)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 (QSERDES_RX + 0xec)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 (QSERDES_RX + 0xf0)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 (QSERDES_RX + 0xf4)
+#define QSERDES_RX_RX_IDAC_TSETTLE_LOW (QSERDES_RX + 0xf8)
+#define QSERDES_RX_RX_IDAC_TSETTLE_HIGH (QSERDES_RX + 0xfc)
+#define QSERDES_RX_RX_IDAC_MEASURE_TIME (QSERDES_RX + 0x100)
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 (QSERDES_RX + 0x110)
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 (QSERDES_RX + 0x114)
+#define QSERDES_RX_SIGDET_CNTRL (QSERDES_RX + 0x11c)
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL (QSERDES_RX + 0x124)
+#define QSERDES_RX_RX_BAND (QSERDES_RX + 0x128)
+#define QSERDES_RX_RX_MODE_00_LOW (QSERDES_RX + 0x15c)
+#define QSERDES_RX_RX_MODE_00_HIGH (QSERDES_RX + 0x160)
+#define QSERDES_RX_RX_MODE_00_HIGH2 (QSERDES_RX + 0x164)
+#define QSERDES_RX_RX_MODE_00_HIGH3 (QSERDES_RX + 0x168)
+#define QSERDES_RX_RX_MODE_00_HIGH4 (QSERDES_RX + 0x16c)
+#define QSERDES_RX_RX_MODE_01_LOW (QSERDES_RX + 0x170)
+#define QSERDES_RX_RX_MODE_01_HIGH (QSERDES_RX + 0x174)
+#define QSERDES_RX_RX_MODE_01_HIGH2 (QSERDES_RX + 0x178)
+#define QSERDES_RX_RX_MODE_01_HIGH3 (QSERDES_RX + 0x17c)
+#define QSERDES_RX_RX_MODE_01_HIGH4 (QSERDES_RX + 0x180)
+#define QSERDES_RX_RX_MODE_10_LOW (QSERDES_RX + 0x184)
+#define QSERDES_RX_RX_MODE_10_HIGH (QSERDES_RX + 0x188)
+#define QSERDES_RX_RX_MODE_10_HIGH2 (QSERDES_RX + 0x18c)
+#define QSERDES_RX_RX_MODE_10_HIGH3 (QSERDES_RX + 0x190)
+#define QSERDES_RX_RX_MODE_10_HIGH4 (QSERDES_RX + 0x194)
+#define QSERDES_RX_DCC_CTRL1 (QSERDES_RX + 0x1a8)
+
+#define QSERDES_TX 0x400
+#define QSERDES_TX_TX_BAND (QSERDES_TX + 0x24)
+#define QSERDES_TX_SLEW_CNTL (QSERDES_TX + 0x28)
+#define QSERDES_TX_RES_CODE_LANE_OFFSET_TX (QSERDES_TX + 0x3c)
+#define QSERDES_TX_RES_CODE_LANE_OFFSET_RX (QSERDES_TX + 0x40)
+#define QSERDES_TX_LANE_MODE_1 (QSERDES_TX + 0x84)
+#define QSERDES_TX_LANE_MODE_3 (QSERDES_TX + 0x8c)
+#define QSERDES_TX_RCV_DETECT_LVL_2 (QSERDES_TX + 0xa4)
+#define QSERDES_TX_TRAN_DRVR_EMP_EN (QSERDES_TX + 0xc0)
+
+#define QSERDES_PCS 0xC00
+#define QSERDES_PCS_PHY_START (QSERDES_PCS + 0x0)
+#define QSERDES_PCS_POWER_DOWN_CONTROL (QSERDES_PCS + 0x4)
+#define QSERDES_PCS_SW_RESET (QSERDES_PCS + 0x8)
+#define QSERDES_PCS_LINE_RESET_TIME (QSERDES_PCS + 0xc)
+#define QSERDES_PCS_TX_LARGE_AMP_DRV_LVL (QSERDES_PCS + 0x20)
+#define QSERDES_PCS_TX_SMALL_AMP_DRV_LVL (QSERDES_PCS + 0x28)
+#define QSERDES_PCS_TX_MID_TERM_CTRL1 (QSERDES_PCS + 0xd8)
+#define QSERDES_PCS_TX_MID_TERM_CTRL2 (QSERDES_PCS + 0xdc)
+#define QSERDES_PCS_SGMII_MISC_CTRL8 (QSERDES_PCS + 0x118)
+#define QSERDES_PCS_PCS_READY_STATUS (QSERDES_PCS + 0x94)
+
+#define QSERDES_COM_C_READY BIT(0)
+#define QSERDES_PCS_READY BIT(0)
+#define QSERDES_PCS_SGMIIPHY_READY BIT(7)
+#define QSERDES_COM_C_PLL_LOCKED BIT(1)
+
+struct qcom_dwmac_sgmii_phy_data {
+ struct regmap *regmap;
+ struct clk *refclk;
+ int speed;
+};
+
+static void qcom_dwmac_sgmii_phy_init_1g(struct regmap *regmap)
+{
+ regmap_write(regmap, QSERDES_PCS_SW_RESET, 0x01);
+ regmap_write(regmap, QSERDES_PCS_POWER_DOWN_CONTROL, 0x01);
+
+ regmap_write(regmap, QSERDES_COM_PLL_IVCO, 0x0F);
+ regmap_write(regmap, QSERDES_COM_CP_CTRL_MODE0, 0x06);
+ regmap_write(regmap, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
+ regmap_write(regmap, QSERDES_COM_PLL_CCTRL_MODE0, 0x36);
+ regmap_write(regmap, QSERDES_COM_SYSCLK_EN_SEL, 0x1A);
+ regmap_write(regmap, QSERDES_COM_LOCK_CMP1_MODE0, 0x0A);
+ regmap_write(regmap, QSERDES_COM_LOCK_CMP2_MODE0, 0x1A);
+ regmap_write(regmap, QSERDES_COM_DEC_START_MODE0, 0x82);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03);
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE1_MODE0, 0x24);
+
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE2_MODE0, 0x02);
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE_INITVAL2, 0x00);
+ regmap_write(regmap, QSERDES_COM_HSCLK_SEL, 0x04);
+ regmap_write(regmap, QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00);
+ regmap_write(regmap, QSERDES_COM_CORECLK_DIV_MODE0, 0x0A);
+ regmap_write(regmap, QSERDES_COM_CORE_CLK_EN, 0x00);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xB9);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1E);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11);
+
+ regmap_write(regmap, QSERDES_TX_TX_BAND, 0x05);
+ regmap_write(regmap, QSERDES_TX_SLEW_CNTL, 0x0A);
+ regmap_write(regmap, QSERDES_TX_RES_CODE_LANE_OFFSET_TX, 0x09);
+ regmap_write(regmap, QSERDES_TX_RES_CODE_LANE_OFFSET_RX, 0x09);
+ regmap_write(regmap, QSERDES_TX_LANE_MODE_1, 0x05);
+ regmap_write(regmap, QSERDES_TX_LANE_MODE_3, 0x00);
+ regmap_write(regmap, QSERDES_TX_RCV_DETECT_LVL_2, 0x12);
+ regmap_write(regmap, QSERDES_TX_TRAN_DRVR_EMP_EN, 0x0C);
+
+ regmap_write(regmap, QSERDES_RX_UCDR_FO_GAIN, 0x0A);
+ regmap_write(regmap, QSERDES_RX_UCDR_SO_GAIN, 0x06);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0A);
+ regmap_write(regmap, QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7F);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x01);
+ regmap_write(regmap, QSERDES_RX_UCDR_PI_CONTROLS, 0x81);
+ regmap_write(regmap, QSERDES_RX_UCDR_PI_CTRL2, 0x80);
+ regmap_write(regmap, QSERDES_RX_RX_TERM_BW, 0x04);
+ regmap_write(regmap, QSERDES_RX_VGA_CAL_CNTRL2, 0x08);
+ regmap_write(regmap, QSERDES_RX_GM_CAL, 0x0F);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4A);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0A);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_TSETTLE_LOW, 0x80);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_TSETTLE_HIGH, 0x01);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_MEASURE_TIME, 0x20);
+ regmap_write(regmap, QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17);
+ regmap_write(regmap, QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00);
+ regmap_write(regmap, QSERDES_RX_SIGDET_CNTRL, 0x0F);
+ regmap_write(regmap, QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E);
+ regmap_write(regmap, QSERDES_RX_RX_BAND, 0x05);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_LOW, 0xE0);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH3, 0x09);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH4, 0xB1);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_LOW, 0xE0);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH3, 0x09);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH4, 0xB1);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_LOW, 0xE0);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH3, 0x3B);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH4, 0xB7);
+ regmap_write(regmap, QSERDES_RX_DCC_CTRL1, 0x0C);
+
+ regmap_write(regmap, QSERDES_PCS_LINE_RESET_TIME, 0x0C);
+ regmap_write(regmap, QSERDES_PCS_TX_LARGE_AMP_DRV_LVL, 0x1F);
+ regmap_write(regmap, QSERDES_PCS_TX_SMALL_AMP_DRV_LVL, 0x03);
+ regmap_write(regmap, QSERDES_PCS_TX_MID_TERM_CTRL1, 0x83);
+ regmap_write(regmap, QSERDES_PCS_TX_MID_TERM_CTRL2, 0x08);
+ regmap_write(regmap, QSERDES_PCS_SGMII_MISC_CTRL8, 0x0C);
+ regmap_write(regmap, QSERDES_PCS_SW_RESET, 0x00);
+
+ regmap_write(regmap, QSERDES_PCS_PHY_START, 0x01);
+}
+
+static void qcom_dwmac_sgmii_phy_init_2p5g(struct regmap *regmap)
+{
+ regmap_write(regmap, QSERDES_PCS_SW_RESET, 0x01);
+ regmap_write(regmap, QSERDES_PCS_POWER_DOWN_CONTROL, 0x01);
+
+ regmap_write(regmap, QSERDES_COM_PLL_IVCO, 0x0F);
+ regmap_write(regmap, QSERDES_COM_CP_CTRL_MODE0, 0x06);
+ regmap_write(regmap, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
+ regmap_write(regmap, QSERDES_COM_PLL_CCTRL_MODE0, 0x36);
+ regmap_write(regmap, QSERDES_COM_SYSCLK_EN_SEL, 0x1A);
+ regmap_write(regmap, QSERDES_COM_LOCK_CMP1_MODE0, 0x1A);
+ regmap_write(regmap, QSERDES_COM_LOCK_CMP2_MODE0, 0x41);
+ regmap_write(regmap, QSERDES_COM_DEC_START_MODE0, 0x7A);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START2_MODE0, 0x20);
+ regmap_write(regmap, QSERDES_COM_DIV_FRAC_START3_MODE0, 0x01);
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE1_MODE0, 0xA1);
+
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE2_MODE0, 0x02);
+ regmap_write(regmap, QSERDES_COM_VCO_TUNE_INITVAL2, 0x00);
+ regmap_write(regmap, QSERDES_COM_HSCLK_SEL, 0x03);
+ regmap_write(regmap, QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00);
+ regmap_write(regmap, QSERDES_COM_CORECLK_DIV_MODE0, 0x05);
+ regmap_write(regmap, QSERDES_COM_CORE_CLK_EN, 0x00);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xCD);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1C);
+ regmap_write(regmap, QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11);
+
+ regmap_write(regmap, QSERDES_TX_TX_BAND, 0x04);
+ regmap_write(regmap, QSERDES_TX_SLEW_CNTL, 0x0A);
+ regmap_write(regmap, QSERDES_TX_RES_CODE_LANE_OFFSET_TX, 0x09);
+ regmap_write(regmap, QSERDES_TX_RES_CODE_LANE_OFFSET_RX, 0x02);
+ regmap_write(regmap, QSERDES_TX_LANE_MODE_1, 0x05);
+ regmap_write(regmap, QSERDES_TX_LANE_MODE_3, 0x00);
+ regmap_write(regmap, QSERDES_TX_RCV_DETECT_LVL_2, 0x12);
+ regmap_write(regmap, QSERDES_TX_TRAN_DRVR_EMP_EN, 0x0C);
+
+ regmap_write(regmap, QSERDES_RX_UCDR_FO_GAIN, 0x0A);
+ regmap_write(regmap, QSERDES_RX_UCDR_SO_GAIN, 0x06);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0A);
+ regmap_write(regmap, QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7F);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00);
+ regmap_write(regmap, QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x01);
+ regmap_write(regmap, QSERDES_RX_UCDR_PI_CONTROLS, 0x81);
+ regmap_write(regmap, QSERDES_RX_UCDR_PI_CTRL2, 0x80);
+ regmap_write(regmap, QSERDES_RX_RX_TERM_BW, 0x00);
+ regmap_write(regmap, QSERDES_RX_VGA_CAL_CNTRL2, 0x08);
+ regmap_write(regmap, QSERDES_RX_GM_CAL, 0x0F);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4A);
+ regmap_write(regmap, QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0A);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_TSETTLE_LOW, 0x80);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_TSETTLE_HIGH, 0x01);
+ regmap_write(regmap, QSERDES_RX_RX_IDAC_MEASURE_TIME, 0x20);
+ regmap_write(regmap, QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17);
+ regmap_write(regmap, QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00);
+ regmap_write(regmap, QSERDES_RX_SIGDET_CNTRL, 0x0F);
+ regmap_write(regmap, QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x1E);
+ regmap_write(regmap, QSERDES_RX_RX_BAND, 0x18);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_LOW, 0x18);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH3, 0x0C);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_00_HIGH4, 0xB8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_LOW, 0xE0);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH3, 0x09);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_01_HIGH4, 0xB1);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_LOW, 0xE0);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH2, 0xC8);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH3, 0x3B);
+ regmap_write(regmap, QSERDES_RX_RX_MODE_10_HIGH4, 0xB7);
+ regmap_write(regmap, QSERDES_RX_DCC_CTRL1, 0x0C);
+
+ regmap_write(regmap, QSERDES_PCS_LINE_RESET_TIME, 0x0C);
+ regmap_write(regmap, QSERDES_PCS_TX_LARGE_AMP_DRV_LVL, 0x1F);
+ regmap_write(regmap, QSERDES_PCS_TX_SMALL_AMP_DRV_LVL, 0x03);
+ regmap_write(regmap, QSERDES_PCS_TX_MID_TERM_CTRL1, 0x83);
+ regmap_write(regmap, QSERDES_PCS_TX_MID_TERM_CTRL2, 0x08);
+ regmap_write(regmap, QSERDES_PCS_SGMII_MISC_CTRL8, 0x8C);
+ regmap_write(regmap, QSERDES_PCS_SW_RESET, 0x00);
+
+ regmap_write(regmap, QSERDES_PCS_PHY_START, 0x01);
+}
+
+static inline int
+qcom_dwmac_sgmii_phy_poll_status(struct regmap *regmap, unsigned int reg,
+ unsigned int bit)
+{
+ unsigned int val;
+
+ return regmap_read_poll_timeout(regmap, reg, val,
+ val & bit, 1500, 750000);
+}
+
+static int qcom_dwmac_sgmii_phy_calibrate(struct phy *phy)
+{
+ struct qcom_dwmac_sgmii_phy_data *data = phy_get_drvdata(phy);
+ struct device *dev = phy->dev.parent;
+
+ switch (data->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ case SPEED_1000:
+ qcom_dwmac_sgmii_phy_init_1g(data->regmap);
+ break;
+ case SPEED_2500:
+ qcom_dwmac_sgmii_phy_init_2p5g(data->regmap);
+ break;
+ }
+
+ if (qcom_dwmac_sgmii_phy_poll_status(data->regmap,
+ QSERDES_COM_C_READY_STATUS,
+ QSERDES_COM_C_READY)) {
+ dev_err(dev, "QSERDES_COM_C_READY_STATUS timed-out");
+ return -ETIMEDOUT;
+ }
+
+ if (qcom_dwmac_sgmii_phy_poll_status(data->regmap,
+ QSERDES_PCS_PCS_READY_STATUS,
+ QSERDES_PCS_READY)) {
+ dev_err(dev, "PCS_READY timed-out");
+ return -ETIMEDOUT;
+ }
+
+ if (qcom_dwmac_sgmii_phy_poll_status(data->regmap,
+ QSERDES_PCS_PCS_READY_STATUS,
+ QSERDES_PCS_SGMIIPHY_READY)) {
+ dev_err(dev, "SGMIIPHY_READY timed-out");
+ return -ETIMEDOUT;
+ }
+
+ if (qcom_dwmac_sgmii_phy_poll_status(data->regmap,
+ QSERDES_COM_CMN_STATUS,
+ QSERDES_COM_C_PLL_LOCKED)) {
+ dev_err(dev, "PLL Lock Status timed-out");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int qcom_dwmac_sgmii_phy_power_on(struct phy *phy)
+{
+ struct qcom_dwmac_sgmii_phy_data *data = phy_get_drvdata(phy);
+
+ return clk_prepare_enable(data->refclk);
+}
+
+static int qcom_dwmac_sgmii_phy_power_off(struct phy *phy)
+{
+ struct qcom_dwmac_sgmii_phy_data *data = phy_get_drvdata(phy);
+
+ regmap_write(data->regmap, QSERDES_PCS_TX_MID_TERM_CTRL2, 0x08);
+ regmap_write(data->regmap, QSERDES_PCS_SW_RESET, 0x01);
+ udelay(100);
+ regmap_write(data->regmap, QSERDES_PCS_SW_RESET, 0x00);
+ regmap_write(data->regmap, QSERDES_PCS_PHY_START, 0x01);
+
+ clk_disable_unprepare(data->refclk);
+
+ return 0;
+}
+
+static int qcom_dwmac_sgmii_phy_set_speed(struct phy *phy, int speed)
+{
+ struct qcom_dwmac_sgmii_phy_data *data = phy_get_drvdata(phy);
+
+ if (speed != data->speed)
+ data->speed = speed;
+
+ return qcom_dwmac_sgmii_phy_calibrate(phy);
+}
+
+static const struct phy_ops qcom_dwmac_sgmii_phy_ops = {
+ .power_on = qcom_dwmac_sgmii_phy_power_on,
+ .power_off = qcom_dwmac_sgmii_phy_power_off,
+ .set_speed = qcom_dwmac_sgmii_phy_set_speed,
+ .calibrate = qcom_dwmac_sgmii_phy_calibrate,
+ .owner = THIS_MODULE,
+};
+
+static const struct regmap_config qcom_dwmac_sgmii_phy_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .use_relaxed_mmio = true,
+ .disable_locking = true,
+};
+
+static int qcom_dwmac_sgmii_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_dwmac_sgmii_phy_data *data;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ void __iomem *base;
+ struct phy *phy;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->speed = SPEED_10;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ data->regmap = devm_regmap_init_mmio(dev, base,
+ &qcom_dwmac_sgmii_phy_regmap_cfg);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ phy = devm_phy_create(dev, NULL, &qcom_dwmac_sgmii_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ data->refclk = devm_clk_get(dev, "sgmi_ref");
+ if (IS_ERR(data->refclk))
+ return PTR_ERR(data->refclk);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider))
+ return PTR_ERR(provider);
+
+ phy_set_drvdata(phy, data);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_dwmac_sgmii_phy_of_match[] = {
+ { .compatible = "qcom,sa8775p-dwmac-sgmii-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_dwmac_sgmii_phy_of_match);
+
+static struct platform_driver qcom_dwmac_sgmii_phy_driver = {
+ .probe = qcom_dwmac_sgmii_phy_probe,
+ .driver = {
+ .name = "qcom-dwmac-sgmii-phy",
+ .of_match_table = qcom_dwmac_sgmii_phy_of_match,
+ }
+};
+
+module_platform_driver(qcom_dwmac_sgmii_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm DWMAC SGMII PHY driver");
+MODULE_LICENSE("GPL");
--
2.39.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs
2023-06-19 9:13 [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Bartosz Golaszewski
` (2 preceding siblings ...)
2023-06-19 9:13 ` [RESEND PATCH v2 3/3] phy: qcom: add the SGMII SerDes PHY driver Bartosz Golaszewski
@ 2023-06-21 12:15 ` Vinod Koul
3 siblings, 0 replies; 5+ messages in thread
From: Vinod Koul @ 2023-06-21 12:15 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, linux-phy, devicetree, linux-kernel,
Bartosz Golaszewski
On 19-06-23, 11:13, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Add a new PHY driver and its DT bindings (reviewed by DT maintainers).
>
> This is a sub-series of [1] with only the patches targetting the PHY subsystem
> as they can go in independently.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-06-21 12:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-06-19 9:13 [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY Bartosz Golaszewski
2023-06-19 9:13 ` [RESEND PATCH v2 3/3] phy: qcom: add the SGMII SerDes PHY driver Bartosz Golaszewski
2023-06-21 12:15 ` [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).