From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 1/3] clk: qcom: gcc-sc8280xp: Add missing GDSC flags
Date: Tue, 20 Jun 2023 20:54:58 +0200 [thread overview]
Message-ID: <20230620-topic-sc8280_gccgdsc-v1-1-0fd91a942bda@linaro.org> (raw)
In-Reply-To: <20230620-topic-sc8280_gccgdsc-v1-0-0fd91a942bda@linaro.org>
All GDSCs were missing the flags that describe how they should be
treated, namely:
- HW_CTRL - whether the hardware control mode is enabled
- RETAIN_FF_ENABLE - whether to enable retention registers
Add them as appropriate, according to the data from downstream.
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/clk/qcom/gcc-sc8280xp.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
index 04a99dbaa57e..80bc741ee75a 100644
--- a/drivers/clk/qcom/gcc-sc8280xp.c
+++ b/drivers/clk/qcom/gcc-sc8280xp.c
@@ -6760,7 +6760,7 @@ static struct gdsc pcie_0_tunnel_gdsc = {
.name = "pcie_0_tunnel_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE,
};
static struct gdsc pcie_1_tunnel_gdsc = {
@@ -6771,7 +6771,7 @@ static struct gdsc pcie_1_tunnel_gdsc = {
.name = "pcie_1_tunnel_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE,
};
/*
@@ -6786,7 +6786,7 @@ static struct gdsc pcie_2a_gdsc = {
.name = "pcie_2a_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE | ALWAYS_ON,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE | ALWAYS_ON,
};
static struct gdsc pcie_2b_gdsc = {
@@ -6797,7 +6797,7 @@ static struct gdsc pcie_2b_gdsc = {
.name = "pcie_2b_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE | ALWAYS_ON,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE | ALWAYS_ON,
};
static struct gdsc pcie_3a_gdsc = {
@@ -6808,7 +6808,7 @@ static struct gdsc pcie_3a_gdsc = {
.name = "pcie_3a_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE | ALWAYS_ON,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE | ALWAYS_ON,
};
static struct gdsc pcie_3b_gdsc = {
@@ -6819,7 +6819,7 @@ static struct gdsc pcie_3b_gdsc = {
.name = "pcie_3b_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE | ALWAYS_ON,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE | ALWAYS_ON,
};
static struct gdsc pcie_4_gdsc = {
@@ -6830,7 +6830,7 @@ static struct gdsc pcie_4_gdsc = {
.name = "pcie_4_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = VOTABLE | ALWAYS_ON,
+ .flags = VOTABLE | HW_CTRL | RETAIN_FF_ENABLE | ALWAYS_ON,
};
static struct gdsc ufs_card_gdsc = {
@@ -6839,6 +6839,7 @@ static struct gdsc ufs_card_gdsc = {
.name = "ufs_card_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
+ .flags = RETAIN_FF_ENABLE,
};
static struct gdsc ufs_phy_gdsc = {
@@ -6847,6 +6848,7 @@ static struct gdsc ufs_phy_gdsc = {
.name = "ufs_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
+ .flags = RETAIN_FF_ENABLE,
};
static struct gdsc usb30_mp_gdsc = {
@@ -6855,6 +6857,7 @@ static struct gdsc usb30_mp_gdsc = {
.name = "usb30_mp_gdsc",
},
.pwrsts = PWRSTS_RET_ON,
+ .flags = RETAIN_FF_ENABLE,
};
static struct gdsc usb30_prim_gdsc = {
@@ -6863,6 +6866,7 @@ static struct gdsc usb30_prim_gdsc = {
.name = "usb30_prim_gdsc",
},
.pwrsts = PWRSTS_RET_ON,
+ .flags = RETAIN_FF_ENABLE,
};
static struct gdsc usb30_sec_gdsc = {
@@ -6871,6 +6875,7 @@ static struct gdsc usb30_sec_gdsc = {
.name = "usb30_sec_gdsc",
},
.pwrsts = PWRSTS_RET_ON,
+ .flags = RETAIN_FF_ENABLE,
};
static struct gdsc emac_0_gdsc = {
@@ -6879,6 +6884,7 @@ static struct gdsc emac_0_gdsc = {
.name = "emac_0_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL | RETAIN_FF_ENABLE,
};
static struct gdsc emac_1_gdsc = {
@@ -6887,6 +6893,7 @@ static struct gdsc emac_1_gdsc = {
.name = "emac_1_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL | RETAIN_FF_ENABLE,
};
static struct clk_regmap *gcc_sc8280xp_clocks[] = {
--
2.41.0
next prev parent reply other threads:[~2023-06-20 18:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-20 18:54 [PATCH 0/3] Fix up 8280 GCC GDSCs Konrad Dybcio
2023-06-20 18:54 ` Konrad Dybcio [this message]
2023-06-20 18:54 ` [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs Konrad Dybcio
2023-06-22 1:55 ` Rob Herring
2023-06-20 18:55 ` [PATCH 3/3] clk: qcom: gcc-sc8280xp: " Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230620-topic-sc8280_gccgdsc-v1-1-0fd91a942bda@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).