From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 24EB2EB64D8 for ; Tue, 20 Jun 2023 15:13:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233613AbjFTPNg (ORCPT ); Tue, 20 Jun 2023 11:13:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43994 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233632AbjFTPNc (ORCPT ); Tue, 20 Jun 2023 11:13:32 -0400 Received: from www530.your-server.de (www530.your-server.de [188.40.30.78]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5569D10E2; Tue, 20 Jun 2023 08:13:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=geanix.com; s=default2211; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID; bh=AAUJ3xkymtwR/hNvg5HF3mD3pxuud8yl+zY7HV+rgic=; b=ErDwt+ZL5M72wX7eVqGKyX76pD XtF7H3Dddabs3ePxZ/6Ww9o8z85TGKyrK7sbA/uhjgDdGb237Z76tmRSGEgfoI1PnFPo/l7X7TQus jjYotXp995vLBw/AvoCV82gNN9Wedag7vMKnnueyHx2YwBVBy5cKTq+gDMc6kVj56WqfRNXtYXant M1umxpDwctfkLQAOBikf+TpgMmZwbHoH+P/UPeVh5oUpGXIrmHTAXHdH7uoML3T1VZTS2z/JSK0LM 1D1DPMznKUhTi2HroJqooe0Md+8NnFvdOb1L95NTl3BsFzSj0X++LrPG6IQ9caaeA6pky67fRoiKn /axT9T8g==; Received: from sslproxy02.your-server.de ([78.47.166.47]) by www530.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1qBd2v-0001Zo-LH; Tue, 20 Jun 2023 17:13:29 +0200 Received: from [185.17.218.86] (helo=zen..) by sslproxy02.your-server.de with esmtpsa (TLSv1.3:TLS_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1qBd2v-0003u6-4E; Tue, 20 Jun 2023 17:13:29 +0200 From: Sean Nyekjaer To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue Cc: Sean Nyekjaer , dantuguf14105@gmail.com, Olivier Moysan , devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v1 7/7] ARM: dts: stm32: Add Octavo OSD32MP1-RED board Date: Tue, 20 Jun 2023 17:13:12 +0200 Message-Id: <20230620151312.1064629-7-sean@geanix.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230620151312.1064629-1-sean@geanix.com> References: <20230620151312.1064629-1-sean@geanix.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Authenticated-Sender: sean@geanix.com X-Virus-Scanned: Clear (ClamAV 0.103.8/26945/Tue Jun 20 09:30:24 2023) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add support for the Octavo OSD32MP1-RED development board. General features: - STM32MP157C - 512MB DDR3 - CAN-FD - HDMI - USB-C OTG - UART Signed-off-by: Sean Nyekjaer Reviewed-by: Olivier Moysan --- Changes since v0: - Adapted to use stm32mp15xx-osd32.dtsi .../arm/boot/dts/stm32mp157c-osd32mp1-red.dts | 226 ++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157c-osd32mp1-red.dts diff --git a/arch/arm/boot/dts/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/stm32mp157c-osd32mp1-red.dts new file mode 100644 index 000000000000..2823857900de --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-osd32mp1-red.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Geanix ApS 2023 - All Rights Reserved + * Author: Sean Nyekjaer + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-osd32.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include +#include + +/ { + model = "Octavo OSD32MP1 RED board"; + compatible = "octavo,stm32mp157c-osd32mp1-red", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <3>; + }; + }; +}; + + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc CK_PER>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_b>; + pinctrl-1 = <&i2s2_sleep_pins_b>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +<dc { + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + status = "okay"; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_e>; + pinctrl-1 = <<dc_sleep_pins_e>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpioe 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_d>; + pinctrl-1 = <&m_can1_sleep_pins_d>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + vbus-supply = <&vbus_otg>; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + +&rtc { + status = "okay"; +}; + +&crc1 { + status = "okay"; +}; + +&dts { + status = "okay"; +}; -- 2.40.0