* [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3
@ 2023-07-03 17:57 Sricharan Ramabadhran
2023-07-04 12:33 ` Konrad Dybcio
2023-07-05 8:44 ` Manivannan Sadhasivam
0 siblings, 2 replies; 4+ messages in thread
From: Sricharan Ramabadhran @ 2023-07-03 17:57 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, sboyd, mturquette, mani, lpieralisi, bhelgaas,
linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-pci,
quic_srichara
Cc: stable
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
2_3_3 post_init ops. pcie slave addr size was initially set
to 0x358, but was wrongly changed to 0x168 as a part of
"PCI: qcom: Remove PCIE20_ prefix from register definitions"
Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
Without this pcie bring up on IPQ8074 is broken now.
Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
---
[V2] Fixed the 'fixes tag' correctly, subject, right macro usage
drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..1689d072fe86 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,6 @@
#define PARF_PHY_REFCLK 0x4c
#define PARF_CONFIG_BITS 0x50
#define PARF_DBI_BASE_ADDR 0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
#define PARF_MHI_CLOCK_RESET_CTRL 0x174
#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
@@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
u32 val;
writel(SLV_ADDR_SPACE_SZ,
- pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
+ pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3
2023-07-03 17:57 [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3 Sricharan Ramabadhran
@ 2023-07-04 12:33 ` Konrad Dybcio
2023-07-05 8:44 ` Manivannan Sadhasivam
1 sibling, 0 replies; 4+ messages in thread
From: Konrad Dybcio @ 2023-07-04 12:33 UTC (permalink / raw)
To: Sricharan Ramabadhran, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, conor+dt, sboyd, mturquette, mani,
lpieralisi, bhelgaas, linux-arm-msm, devicetree, linux-kernel,
linux-clk, linux-pci
Cc: stable
On 3.07.2023 19:57, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
> 2_3_3 post_init ops. pcie slave addr size was initially set
> to 0x358, but was wrongly changed to 0x168 as a part of
> "PCI: qcom: Remove PCIE20_ prefix from register definitions"
> Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
> and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
>
> Without this pcie bring up on IPQ8074 is broken now.
>
> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> [V2] Fixed the 'fixes tag' correctly, subject, right macro usage
>
> drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..1689d072fe86 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
> #define PARF_PHY_REFCLK 0x4c
> #define PARF_CONFIG_BITS 0x50
> #define PARF_DBI_BASE_ADDR 0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
> @@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
> u32 val;
>
> writel(SLV_ADDR_SPACE_SZ,
> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
>
> val = readl(pcie->parf + PARF_PHY_CTRL);
> val &= ~PHY_TEST_PWR_DOWN;
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3
2023-07-03 17:57 [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3 Sricharan Ramabadhran
2023-07-04 12:33 ` Konrad Dybcio
@ 2023-07-05 8:44 ` Manivannan Sadhasivam
2023-07-06 6:02 ` Sricharan Ramabadhran
1 sibling, 1 reply; 4+ messages in thread
From: Manivannan Sadhasivam @ 2023-07-05 8:44 UTC (permalink / raw)
To: Sricharan Ramabadhran
Cc: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, sboyd, mturquette, lpieralisi, bhelgaas, linux-arm-msm,
devicetree, linux-kernel, linux-clk, linux-pci, stable
On Mon, Jul 03, 2023 at 11:27:57PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
> 2_3_3 post_init ops. pcie slave addr size was initially set
PCIe
> to 0x358, but was wrongly changed to 0x168 as a part of
commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> "PCI: qcom: Remove PCIE20_ prefix from register definitions"
> Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
> and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
>
Commit message should be imperative.
> Without this pcie bring up on IPQ8074 is broken now.
>
> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
> [V2] Fixed the 'fixes tag' correctly, subject, right macro usage
>
> drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..1689d072fe86 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
> #define PARF_PHY_REFCLK 0x4c
> #define PARF_CONFIG_BITS 0x50
> #define PARF_DBI_BASE_ADDR 0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
> @@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
> u32 val;
>
> writel(SLV_ADDR_SPACE_SZ,
> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
This could be wrapped in the above line itself.
- Mani
>
> val = readl(pcie->parf + PARF_PHY_CTRL);
> val &= ~PHY_TEST_PWR_DOWN;
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3
2023-07-05 8:44 ` Manivannan Sadhasivam
@ 2023-07-06 6:02 ` Sricharan Ramabadhran
0 siblings, 0 replies; 4+ messages in thread
From: Sricharan Ramabadhran @ 2023-07-06 6:02 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, sboyd, mturquette, lpieralisi, bhelgaas, linux-arm-msm,
devicetree, linux-kernel, linux-clk, linux-pci, stable
On 7/5/2023 2:14 PM, Manivannan Sadhasivam wrote:
> On Mon, Jul 03, 2023 at 11:27:57PM +0530, Sricharan Ramabadhran wrote:
>> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
>> 2_3_3 post_init ops. pcie slave addr size was initially set
>
> PCIe
>
>> to 0x358, but was wrongly changed to 0x168 as a part of
>
> commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
>
ok.
>> "PCI: qcom: Remove PCIE20_ prefix from register definitions"
>> Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
>> and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
>>
>
> Commit message should be imperative.
ok, will send v3.
>
>> Without this pcie bring up on IPQ8074 is broken now.
>>
>> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>> [V2] Fixed the 'fixes tag' correctly, subject, right macro usage
>>
>> drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>> index 4ab30892f6ef..1689d072fe86 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>> @@ -43,7 +43,6 @@
>> #define PARF_PHY_REFCLK 0x4c
>> #define PARF_CONFIG_BITS 0x50
>> #define PARF_DBI_BASE_ADDR 0x168
>> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
>> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
>> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
>> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
>> @@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
>> u32 val;
>>
>> writel(SLV_ADDR_SPACE_SZ,
>> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
>> + pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
>
> This could be wrapped in the above line itself.
sure, will post v3
Regards,
Sricharan
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-07-06 6:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-03 17:57 [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3 Sricharan Ramabadhran
2023-07-04 12:33 ` Konrad Dybcio
2023-07-05 8:44 ` Manivannan Sadhasivam
2023-07-06 6:02 ` Sricharan Ramabadhran
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).