From: Christopher Obbard <chris.obbard@collabora.com>
To: linux-rockchip@lists.infradead.org
Cc: kernel@collabora.com,
Christopher Obbard <chris.obbard@collabora.com>,
Akash Gajjar <Akash_Gajjar@mentor.com>,
Conor Dooley <conor+dt@kernel.org>,
FUKAUMI Naoki <naoki@radxa.com>, Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Manoj Sai <abbaraju.manojsai@amarulasolutions.com>,
Pragnesh Patel <Pragnesh_Patel@mentor.com>,
Rob Herring <robh+dt@kernel.org>,
Stephen Chen <stephen@radxa.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 0/2] Disable HS400 for eMMC on Radxa ROCK 4 SBCs
Date: Wed, 5 Jul 2023 15:42:53 +0100 [thread overview]
Message-ID: <20230705144255.115299-1-chris.obbard@collabora.com> (raw)
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
Christopher Obbard (2):
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 3 +--
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 4 ++--
2 files changed, 3 insertions(+), 4 deletions(-)
--
2.40.1
next reply other threads:[~2023-07-05 14:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-05 14:42 Christopher Obbard [this message]
2023-07-05 14:42 ` [PATCH v1 1/2] arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4 Christopher Obbard
2023-07-05 20:36 ` Folker Schwesinger
2023-07-16 4:35 ` Alban Browaeys
2023-07-05 14:42 ` [PATCH v1 2/2] arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+ Christopher Obbard
2023-07-05 20:32 ` [PATCH v1 0/2] Disable HS400 for eMMC on Radxa ROCK 4 SBCs Folker Schwesinger
2023-07-10 14:16 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230705144255.115299-1-chris.obbard@collabora.com \
--to=chris.obbard@collabora.com \
--cc=Akash_Gajjar@mentor.com \
--cc=Pragnesh_Patel@mentor.com \
--cc=abbaraju.manojsai@amarulasolutions.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@amarulasolutions.com \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=naoki@radxa.com \
--cc=robh+dt@kernel.org \
--cc=stephen@radxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).