[PATCH v2 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[PATCH v2 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[David Wronek]

This series introduces support for the Qualcomm SM7125 SoC and the
Xiaomi SM7125 platform.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/20230704163848.169853-2-davidwronek@gmail.com/

---
David Wronek (7):
  clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
  dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
  dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
  soc: qcom: socinfo: Add SoC ID for SM7125
  arm64: dts: qcom: pm6150: Add resin and rtc nodes
  arm64: dts: qcom: Add SM7125 device tree
  arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |  15 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 419 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7125.dtsi          |  16 +
 drivers/clk/qcom/gcc-sc7180.c                 |   1 +
 drivers/soc/qcom/socinfo.c                    |   1 +
 include/dt-bindings/arm/qcom,ids.h            |   1 +
 9 files changed, 477 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi

-- 
2.41.0

[PATCH v2 1/7] clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

[David Wronek]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 drivers/clk/qcom/gcc-sc7180.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index cef3c77564cf..49f36e1df4fa 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_data = gcc_parent_data_5,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_5),
+		.flags = CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_rcg2_floor_ops,
 	},
 };
-- 
2.41.0

[PATCH v2 2/7] dt-bindings: arm: qcom,ids: Add SoC ID for SM7125

[David Wronek]

Add the SoC ID for Qualcomm SM7125.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 include/dt-bindings/arm/qcom,ids.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index bcbe9ee2cdaf..6a8dd2e42b24 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -215,6 +215,7 @@
 #define QCOM_ID_SDA429W			437
 #define QCOM_ID_SM8350			439
 #define QCOM_ID_QCM2290			441
+#define QCOM_ID_SM7125			443
 #define QCOM_ID_SM6115			444
 #define QCOM_ID_IPQ5010			446
 #define QCOM_ID_IPQ5018			447
-- 
2.41.0

[PATCH v2 3/7] dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board

[David Wronek]

Document the xiaomi,joyeuse board based on the Qualcomm SM7125 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 450f616774e0..a403c433e9b5 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -77,6 +77,7 @@ description: |
         sm6125
         sm6350
         sm6375
+        sm7125
         sm7225
         sm8150
         sm8250
@@ -929,6 +930,11 @@ properties:
               - sony,pdx225
           - const: qcom,sm6375
 
+      - items:
+          - enum:
+              - xiaomi,joyeuse
+          - const: qcom,sm7125
+
       - items:
           - enum:
               - fairphone,fp4
@@ -1072,6 +1078,7 @@ allOf:
               - qcom,sm6115
               - qcom,sm6125
               - qcom,sm6350
+              - qcom,sm7125
               - qcom,sm7225
               - qcom,sm8150
               - qcom,sm8250
-- 
2.41.0

[PATCH v2 4/7] soc: qcom: socinfo: Add SoC ID for SM7125

[David Wronek]

Add the SoC ID entry for Qualcomm SM7125.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 drivers/soc/qcom/socinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 4d49945b3a35..785b88e2da54 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -371,6 +371,7 @@ static const struct soc_id soc_id[] = {
 	{ qcom_board_id(SDA429W) },
 	{ qcom_board_id(SM8350) },
 	{ qcom_board_id(QCM2290) },
+	{ qcom_board_id(SM7125) },
 	{ qcom_board_id(SM6115) },
 	{ qcom_board_id(IPQ5010) },
 	{ qcom_board_id(IPQ5018) },
-- 
2.41.0

[PATCH v2 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

[David Wronek]

Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device and disable it by default.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 2e6afa296141..43c50f890e8b 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,13 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.41.0

[PATCH v2 6/7] arm64: dts: qcom: Add SM7125 device tree

[David Wronek]

The Snapdragon 720G (sm7125) is software-wise very similar to the
Snapdragon 7c with minor differences in clock speeds and as added here,
it uses the Kryo 465 instead of Kryo 468.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
new file mode 100644
index 000000000000..12dd72859a43
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&CPU0 { compatible = "qcom,kryo465"; };
+&CPU1 { compatible = "qcom,kryo465"; };
+&CPU2 { compatible = "qcom,kryo465"; };
+&CPU3 { compatible = "qcom,kryo465"; };
+&CPU4 { compatible = "qcom,kryo465"; };
+&CPU5 { compatible = "qcom,kryo465"; };
+&CPU6 { compatible = "qcom,kryo465"; };
+&CPU7 { compatible = "qcom,kryo465"; };
-- 
2.41.0

[PATCH v2 7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

[David Wronek]

There are 6 Xiaomi smartphones with the SM7125 SoC:

- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)

These devices share a common board design (a.k.a miatoll) with only a
few differences. Add support for the common board, as well as support
for the global Redmi Note 9 Pro.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 419 ++++++++++++++++++
 3 files changed, 436 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..7ef9e7d43904 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
new file mode 100644
index 000000000000..2b3d1ed1bcae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-miatoll.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9 Pro (Global)";
+	compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x50022 1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
new file mode 100644
index 000000000000..8ef2153eb1ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7125.dtsi"
+#include "pm6150.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM7125 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-down {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8150l_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8400000>;
+			no-map;
+		};
+
+		venus_mem: memory@8ee00000 {
+			reg = <0x0 0x8ee00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@8f300000 {
+			reg = <0x0 0x8f300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@91100000 {
+			reg = <0x0 0x91100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: memory@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		gpu_mem: memory@93b15000 {
+			reg = <0x0 0x93b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@9d800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9d800000 0x0 0x400000>;
+			record-size = <0x80000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x100000>;
+		};
+
+		rmtfs_mem: memory@fa601000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xfa601000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a_0p88: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p664: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p1: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_3p0: ldo18 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p23: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_3p0: ldo6 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6150_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_3p0>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p88>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};
-- 
2.41.0

Re: [PATCH v2 2/7] dt-bindings: arm: qcom,ids: Add SoC ID for SM7125

[Krzysztof Kozlowski]

On 06/07/2023 14:40, David Wronek wrote:
> Add the SoC ID for Qualcomm SM7125.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 4/7] soc: qcom: socinfo: Add SoC ID for SM7125

[Krzysztof Kozlowski]

On 06/07/2023 14:40, David Wronek wrote:
> Add the SoC ID entry for Qualcomm SM7125.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
>  drivers/soc/qcom/socinfo.c | 1 +


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 6/7] arm64: dts: qcom: Add SM7125 device tree

[Konrad Dybcio]

On 6.07.2023 14:40, David Wronek wrote:
> The Snapdragon 720G (sm7125) is software-wise very similar to the
> Snapdragon 7c with minor differences in clock speeds and as added here,
> it uses the Kryo 465 instead of Kryo 468.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
Can you please paste the output of `dmesg | grep "secondary processor"`?

That would let us determine the unique identifier of the cores.

Konrad
>  arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
> new file mode 100644
> index 000000000000..12dd72859a43
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#include "sc7180.dtsi"
> +
> +/* SM7125 uses Kryo 465 instead of Kryo 468 */
> +&CPU0 { compatible = "qcom,kryo465"; };
> +&CPU1 { compatible = "qcom,kryo465"; };
> +&CPU2 { compatible = "qcom,kryo465"; };
> +&CPU3 { compatible = "qcom,kryo465"; };
> +&CPU4 { compatible = "qcom,kryo465"; };
> +&CPU5 { compatible = "qcom,kryo465"; };
> +&CPU6 { compatible = "qcom,kryo465"; };
> +&CPU7 { compatible = "qcom,kryo465"; };

Re: [PATCH v2 6/7] arm64: dts: qcom: Add SM7125 device tree

[David Wronek]

On Thu, Jul 6, 2023 at 5:25 PM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> On 6.07.2023 14:40, David Wronek wrote:
> > The Snapdragon 720G (sm7125) is software-wise very similar to the
> > Snapdragon 7c with minor differences in clock speeds and as added here,
> > it uses the Kryo 465 instead of Kryo 468.
> >
> > Signed-off-by: David Wronek <davidwronek@gmail.com>
> > ---
> Can you please paste the output of `dmesg | grep "secondary processor"`?
>
> That would let us determine the unique identifier of the cores.
>
> Konrad
I get this output with the command:
[    0.005884] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
[    0.007191] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
[    0.008559] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
[    0.010046] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
[    0.011639] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
[    0.014424] CPU6: Booted secondary processor 0x0000000600 [0x51ff804f]
[    0.016421] CPU7: Booted secondary processor 0x0000000700 [0x51ff804f]

Sincerely,
David
> >  arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
> > new file mode 100644
> > index 000000000000..12dd72859a43
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
> > @@ -0,0 +1,16 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#include "sc7180.dtsi"
> > +
> > +/* SM7125 uses Kryo 465 instead of Kryo 468 */
> > +&CPU0 { compatible = "qcom,kryo465"; };
> > +&CPU1 { compatible = "qcom,kryo465"; };
> > +&CPU2 { compatible = "qcom,kryo465"; };
> > +&CPU3 { compatible = "qcom,kryo465"; };
> > +&CPU4 { compatible = "qcom,kryo465"; };
> > +&CPU5 { compatible = "qcom,kryo465"; };
> > +&CPU6 { compatible = "qcom,kryo465"; };
> > +&CPU7 { compatible = "qcom,kryo465"; };

Re: [PATCH v2 6/7] arm64: dts: qcom: Add SM7125 device tree

[Konrad Dybcio]

On 6.07.2023 17:36, David Wronek wrote:
> On Thu, Jul 6, 2023 at 5:25 PM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>> On 6.07.2023 14:40, David Wronek wrote:
>>> The Snapdragon 720G (sm7125) is software-wise very similar to the
>>> Snapdragon 7c with minor differences in clock speeds and as added here,
>>> it uses the Kryo 465 instead of Kryo 468.
>>>
>>> Signed-off-by: David Wronek <davidwronek@gmail.com>
>>> ---
>> Can you please paste the output of `dmesg | grep "secondary processor"`?
>>
>> That would let us determine the unique identifier of the cores.
>>
>> Konrad
> I get this output with the command:
> [    0.005884] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
> [    0.007191] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
> [    0.008559] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
> [    0.010046] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
> [    0.011639] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
> [    0.014424] CPU6: Booted secondary processor 0x0000000600 [0x51ff804f]
> [    0.016421] CPU7: Booted secondary processor 0x0000000700 [0x51ff804f]
Hm okay so they are indeed Qualcomm-branded cores.. Sometimes they use the
ARM ones and still call it Kryo 

btw the implementer id of 0x51 is the ascii code of 'Q', nice quirk

Konrad
> 
> Sincerely,
> David
>>>  arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
>>>  1 file changed, 16 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
>>> new file mode 100644
>>> index 000000000000..12dd72859a43
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
>>> @@ -0,0 +1,16 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>>> + */
>>> +
>>> +#include "sc7180.dtsi"
>>> +
>>> +/* SM7125 uses Kryo 465 instead of Kryo 468 */
>>> +&CPU0 { compatible = "qcom,kryo465"; };
>>> +&CPU1 { compatible = "qcom,kryo465"; };
>>> +&CPU2 { compatible = "qcom,kryo465"; };
>>> +&CPU3 { compatible = "qcom,kryo465"; };
>>> +&CPU4 { compatible = "qcom,kryo465"; };
>>> +&CPU5 { compatible = "qcom,kryo465"; };
>>> +&CPU6 { compatible = "qcom,kryo465"; };
>>> +&CPU7 { compatible = "qcom,kryo465"; };

Re: [PATCH v2 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

[Nikita Travkin]

David Wronek писал(а) 06.07.2023 17:40:
> Add support for the RTC which is the same as on other PMICs and add the
> resin child node to the PM6150 PON device and disable it by default.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>

Actually... (+CC CROS watchers) Doug, this would enable a somewhat
dubious RTC for trogdor devices. On qcom firmware the rtc is
forever write-protected but you run TF-A so maybe it's more
cooperative and you can add "allow-set-time" prop for trogdor, in
case qtiseclib doesn't mess with it? Or, alternatively, disable this
rtc for trogdor completely so it doesn't cause trouble?

In any case, on the WoA firmware and with userspace offset handling,
this works beautifully, so:

Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180, Aspire 1

Thanks!
> ---
>  arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> index 2e6afa296141..43c50f890e8b 100644
> --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
>  				bias-pull-up;
>  				linux,code = <KEY_POWER>;
>  			};
> +
> +			pm6150_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				status = "disabled";
> +			};
>  		};
>  
>  		pm6150_temp: temp-alarm@2400 {
> @@ -88,6 +96,13 @@ pm6150_adc_tm: adc-tm@3500 {
>  			status = "disabled";
>  		};
>  
> +		rtc@6000 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>, <0x6100>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> +		};
> +
>  		pm6150_gpios: gpio@c000 {
>  			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;