From: "Rafał Miłecki" <zajec5@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Andre Przywara" <andre.przywara@arm.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Sudeep Holla" <sudeep.holla@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH 1/4] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger
Date: Fri, 7 Jul 2023 13:40:01 +0200 [thread overview]
Message-ID: <20230707114004.2740-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 --
2 files changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index 0734aa249b8e..b9dd50844419 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@ leds {
led-wlan {
label = "bcm53xx:blue:wlan";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
led-system {
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index e6fb6cbe6963..cb22ae2a02e5 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@ leds-0 {
led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
led-system {
@@ -42,7 +41,6 @@ leds-1 {
led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--
2.35.3
next reply other threads:[~2023-07-07 11:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 11:40 Rafał Miłecki [this message]
2023-07-07 11:40 ` [PATCH 2/4] ARM: dts: BCM53573: Drop nonexistent #usb-cells Rafał Miłecki
2023-07-12 17:22 ` Florian Fainelli
2023-07-07 11:40 ` [PATCH 3/4] ARM: dts: BCM53573: Add cells sizes to PCIe node Rafał Miłecki
2023-07-12 17:23 ` Florian Fainelli
2023-07-07 11:40 ` [PATCH 4/4] ARM: dts: BCM53573: Use updated "spi-gpio" binding properties Rafał Miłecki
2023-07-12 17:23 ` Florian Fainelli
2023-07-12 17:21 ` [PATCH 1/4] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230707114004.2740-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=andre.przywara@arm.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).