From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
linux-iio@vger.kernel.org
Subject: [PATCH v2 8/8] arm64: dts: qcom: sm8450-hdk: add ADC-TM thermal zones
Date: Fri, 7 Jul 2023 15:30:27 +0300 [thread overview]
Message-ID: <20230707123027.1510723-9-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230707123027.1510723-1-dmitry.baryshkov@linaro.org>
Add thermal zones controlled through the ADC-TM (ADC thermal monitoring)
PMIC interface. This includes several onboard sensors and the XO thermal
sensor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 244 ++++++++++++++++++++++++
1 file changed, 244 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index d07e402eaba3..4dfc964a4bb1 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -133,6 +133,120 @@ pmic_glink_sbu: endpoint {
};
};
+ thermal-zones {
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-tof-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 5>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ therm1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ therm2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 6>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ usb-conn-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 7>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ wide-rfc-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 4>;
+
+ trips {
+ active-config0 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -607,6 +721,66 @@ &pmr735a_temp_alarm {
io-channel-names = "thermal";
};
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-msm-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ camera-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ therm1-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wide-rfc-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ rear-tof-therm@5 {
+ reg = <5>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ therm2-therm@6 {
+ reg = <6>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ usb-conn-therm@7 {
+ reg = <7>;
+ io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pmk8350_vadc {
status = "okay";
@@ -615,20 +789,90 @@ channel@3 {
label = "pmk8350_die_temp";
};
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "pmk8350_xo_therm";
+ };
+
channel@103 {
reg = <PM8350_ADC7_DIE_TEMP(1)>;
label = "pm8350_die_temp";
};
+ channel@144 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "skin_msm_temp";
+ };
+
+ channel@145 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "camera_temp";
+ };
+
+ channel@146 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "therm1_temp";
+ };
+
+ channel@147 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "wide_rfc_temp";
+ };
+
+ channel@148 {
+ reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "rear_tof_temp";
+ };
+
+ channel@14c {
+ reg = <PM8350_ADC7_GPIO3_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "therm2_temp";
+ };
+
channel@303 {
reg = <PM8350B_ADC7_DIE_TEMP>;
label = "pm8350b_die_temp";
};
+ channel@348 {
+ reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "usb_conn_temp";
+ };
+
channel@403 {
reg = <PMR735A_ADC7_DIE_TEMP>;
label = "pmr735a_die_temp";
};
+
+ channel@44a {
+ reg = <PMR735A_ADC7_GPIO1_100K_PU>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "qtm_w_temp";
+ };
+
+ channel@44b {
+ reg = <PMR735A_ADC7_GPIO2_100K_PU>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "qtm_n_temp";
+ };
};
&remoteproc_adsp {
--
2.40.1
next prev parent reply other threads:[~2023-07-07 12:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 12:30 [PATCH v2 0/8] arm64: dts: qcom: sm8450-hdk: improve thermal monitoring Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 1/8] dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel ids Dmitry Baryshkov
2023-07-10 9:03 ` Krzysztof Kozlowski
2023-07-15 16:56 ` Jonathan Cameron
2023-07-07 12:30 ` [PATCH v2 2/8] arm64: dts: qcom: pm8350: fix thermal zone name Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 3/8] arm64: dts: qcom: pm8350b: " Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 4/8] arm64: dts: qcom: pmr735b: " Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 5/8] arm64: dts: qcom: pmk8350: fix ADC-TM compatible string Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 6/8] arm64: dts: qcom: sm8450-hdk: remove pmr735b PMIC inclusion Dmitry Baryshkov
2023-07-07 12:30 ` [PATCH v2 7/8] arm64: dts: qcom: sm8450-hdk: define DIE_TEMP channels Dmitry Baryshkov
2023-07-07 12:30 ` Dmitry Baryshkov [this message]
2023-07-10 5:07 ` (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8450-hdk: improve thermal monitoring Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230707123027.1510723-9-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).