Re: [PATCH 00/11] iio: adc: Add support for QCOM SPMI PMIC5 Gen3 ADC

[Jonathan Cameron <jic23@kernel.org>]

On Sat, 8 Jul 2023 12:58:24 +0530
Jishnu Prakash <quic_jprakash@quicinc.com> wrote:

> PMIC5 Gen3 has a similar ADC architecture to that on PMIC5 Gen2,
> with all SW communication to ADC going through PMK8550 which
> communicates with other PMICs through PBS. The major difference is
> that the register interface used here is that of an SDAM present on
> PMK8550, rather than a dedicated ADC peripheral. There may be more than one
> SDAM used for ADC5 Gen3. Each ADC SDAM has eight channels, each of which may
> be used for either immediate reads (same functionality as previous PMIC5 and
> PMIC5 Gen2 ADC peripherals) or recurring measurements (same as PMIC5 and PMIC5
> Gen2 ADC_TM functionality). In this case, we have VADC and ADC_TM functionality
> combined into the same driver.
> 
> Patches 1-5 update the name of the previous generation of PMIC5 ADC peripherals
> from ADC7 to ADC5 Gen2, as this is the correct name and it makes more sense now
> to update it, with the addition of the latest ADC5 Gen3 peripheral support.
> 
> Patches 6 and 7 add bindings and driver support respectively for ADC5 Gen3.
> 
> Patches 8-11 are for an additional change, where the QCOM ADC dt-bindings files
> are moved from dt-bindings/iio to dt-bindings/iio/adc folder, as they are
> specifically for ADC devices.
> 
This crossed with Dmitry's set...

https://patchwork.kernel.org/project/linux-iio/patch/20230707123027.1510723-2-dmitry.baryshkov@linaro.org/
which changes a bunch of the includes you are going to rename.

I don't mind which order these land (if both go forward) so will leave
it up to the two of you to figure that out and tell me ;)

Jonathan