From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Johan Hovold <johan@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org
Subject: [PATCH v4 02/10] phy: qcom-qmp-combo: simplify clock handling
Date: Tue, 11 Jul 2023 15:09:08 +0300 [thread overview]
Message-ID: <20230711120916.4165894-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230711120916.4165894-1-dmitry.baryshkov@linaro.org>
For the existing PHYs for new binding we are going to drop ref_clk_src
clock and always use ref clock. Rather than introducing additional code
to handle legacy vs current bindings (and clock names), use
devm_clk_bulk_get_optional() when new bindings are used and
devm_clk_bulk_get_all() when legacy bindings are in place.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 67 ++++++++---------------
1 file changed, 23 insertions(+), 44 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 36eb516f9170..3a98234eb16a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1359,9 +1359,6 @@ struct qmp_phy_cfg {
int (*calibrate_dp_phy)(struct qmp_combo *qmp);
void (*dp_aux_init)(struct qmp_combo *qmp);
- /* clock ids to be requested */
- const char * const *clk_list;
- int num_clks;
/* resets to be requested */
const char * const *reset_list;
int num_resets;
@@ -1403,6 +1400,7 @@ struct qmp_combo {
struct clk *pipe_clk;
struct clk_bulk_data *clks;
+ int num_clks;
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
@@ -1463,19 +1461,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
}
/* list of clocks required by phy */
-static const char * const qmp_v3_phy_clk_l[] = {
+static const char * const qmp_combo_phy_clk_l[] = {
"aux", "cfg_ahb", "ref", "com_aux",
};
-static const char * const qmp_v4_phy_clk_l[] = {
- "aux", "ref", "com_aux",
-};
-
-/* the primary usb3 phy on sm8250 doesn't have a ref clock */
-static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
- "aux", "ref_clk_src", "com_aux"
-};
-
/* list of resets */
static const char * const msm8996_usb3phy_reset_l[] = {
"phy", "common",
@@ -1549,8 +1538,6 @@ static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v3_configure_dp_phy,
.calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1594,8 +1581,6 @@ static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v3_configure_dp_phy,
.calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1641,8 +1626,6 @@ static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v4_configure_dp_phy,
.calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1689,8 +1672,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.configure_dp_phy = qmp_v4_configure_dp_phy,
.calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1734,8 +1715,6 @@ static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v3_configure_dp_phy,
.calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1779,8 +1758,6 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v4_configure_dp_phy,
.calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
- .clk_list = qmp_v4_sm8250_usbphy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1829,8 +1806,6 @@ static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = {
.configure_dp_phy = qmp_v4_configure_dp_phy,
.calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -1879,8 +1854,6 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
.calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.regs = qmp_v6_usb3phy_regs_layout,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2433,7 +2406,7 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
goto err_disable_regulators;
}
- ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
if (ret)
goto err_assert_reset;
@@ -2483,7 +2456,7 @@ static int qmp_combo_com_exit(struct qmp_combo *qmp, bool force)
reset_control_bulk_assert(cfg->num_resets, qmp->resets);
- clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
@@ -2762,7 +2735,6 @@ static void qmp_combo_disable_autonomous_mode(struct qmp_combo *qmp)
static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
{
struct qmp_combo *qmp = dev_get_drvdata(dev);
- const struct qmp_phy_cfg *cfg = qmp->cfg;
dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
@@ -2774,7 +2746,7 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
qmp_combo_enable_autonomous_mode(qmp);
clk_disable_unprepare(qmp->pipe_clk);
- clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
return 0;
}
@@ -2782,7 +2754,6 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
{
struct qmp_combo *qmp = dev_get_drvdata(dev);
- const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret = 0;
dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
@@ -2792,14 +2763,14 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
return 0;
}
- ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
if (ret)
return ret;
ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
- clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
return ret;
}
@@ -2870,9 +2841,8 @@ static int qmp_combo_reset_init(struct qmp_combo *qmp)
static int qmp_combo_clk_init(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qmp->cfg;
struct device *dev = qmp->dev;
- int num = cfg->num_clks;
+ int num = ARRAY_SIZE(qmp_combo_phy_clk_l);
int i;
qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
@@ -2880,9 +2850,11 @@ static int qmp_combo_clk_init(struct qmp_combo *qmp)
return -ENOMEM;
for (i = 0; i < num; i++)
- qmp->clks[i].id = cfg->clk_list[i];
+ qmp->clks[i].id = qmp_combo_phy_clk_l[i];
- return devm_clk_bulk_get(dev, num, qmp->clks);
+ qmp->num_clks = num;
+
+ return devm_clk_bulk_get_optional(dev, num, qmp->clks);
}
static void phy_clk_release_provider(void *res)
@@ -3088,6 +3060,12 @@ static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
if (ret)
return ret;
+ ret = devm_clk_bulk_get_all(qmp->dev, &qmp->clks);
+ if (ret < 0)
+ return ret;
+
+ qmp->num_clks = ret;
+
return 0;
}
@@ -3357,6 +3335,7 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp)
const struct qmp_combo_offsets *offs = cfg->offsets;
struct device *dev = qmp->dev;
void __iomem *base;
+ int ret;
if (!offs)
return -EINVAL;
@@ -3386,6 +3365,10 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp)
}
qmp->dp_dp_phy = base + offs->dp_dp_phy;
+ ret = qmp_combo_clk_init(qmp);
+ if (ret)
+ return ret;
+
qmp->pipe_clk = devm_clk_get(dev, "usb3_pipe");
if (IS_ERR(qmp->pipe_clk)) {
return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
@@ -3434,10 +3417,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
mutex_init(&qmp->phy_mutex);
- ret = qmp_combo_clk_init(qmp);
- if (ret)
- return ret;
-
ret = qmp_combo_reset_init(qmp);
if (ret)
return ret;
--
2.39.2
next prev parent reply other threads:[~2023-07-11 12:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-11 12:09 [PATCH v4 00/10] phy: qcom-qmp-combo: convert to newer style of bindings Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 01/10] dt-bindings: phy: migrate combo QMP PHY bindings to qcom,sc8280xp-qmp-usb43dp-phy.yaml Dmitry Baryshkov
2023-07-11 12:09 ` Dmitry Baryshkov [this message]
2023-07-11 12:09 ` [PATCH v4 03/10] phy: qcom-qmp-combo: populate offsets for all combo PHYs Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 04/10] phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entry Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 06/10] arm64: dts: qcom: sc7280: link usb3_phy_wrapper_gcc_usb30_pipe_clk Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 07/10] arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 08/10] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 09/10] arm64: dts: qcom: sm8150: " Dmitry Baryshkov
2023-07-11 12:09 ` [PATCH v4 10/10] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
2023-07-24 10:56 ` (subset) [PATCH v4 00/10] phy: qcom-qmp-combo: convert to newer " Vinod Koul
2023-09-14 16:04 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230711120916.4165894-3-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johan@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).