From: Praveenkumar I <quic_ipkumar@quicinc.com>
To: <amitk@kernel.org>, <thara.gopinath@gmail.com>,
<agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <rafael@kernel.org>,
<daniel.lezcano@linaro.org>, <rui.zhang@intel.com>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <linux-pm@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <quic_varada@quicinc.com>
Subject: [PATCH v2 5/5] thermal/drivers/tsens: Add IPQ5332 support
Date: Wed, 12 Jul 2023 17:05:39 +0530 [thread overview]
Message-ID: <20230712113539.4029941-6-quic_ipkumar@quicinc.com> (raw)
In-Reply-To: <20230712113539.4029941-1-quic_ipkumar@quicinc.com>
IPQ5332 uses tsens v2.3.3 IP and it is having combined interrupt.
It does not have RPM and kernel needs to take care of sensor
enablement, calibration. Hence introduced new feature_config,
ops and data for IPQ5332.
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
---
[v2]:
Added tsens_features for ipq5332 with VER_2_X_NO_RPM. Used
hw_ids to mention the available sensors. Dropped v2 in
ops_ipq5332.
drivers/thermal/qcom/tsens-v2.c | 25 +++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 3 +++
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index ba74d971fe95..f95dce04fb17 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -62,6 +62,17 @@ static struct tsens_features ipq8074_feat = {
.trip_max_temp = 204000,
};
+static struct tsens_features ipq5332_feat = {
+ .ver_major = VER_2_X_NO_RPM,
+ .crit_int = 1,
+ .combo_int = 1,
+ .adc = 0,
+ .srot_split = 1,
+ .max_sensors = 16,
+ .trip_min_temp = 0,
+ .trip_max_temp = 204000,
+};
+
static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
@@ -265,6 +276,20 @@ struct tsens_plat_data data_ipq8074 = {
.fields = tsens_v2_regfields,
};
+static const struct tsens_ops ops_ipq5332 = {
+ .init = init_tsens_v2,
+ .get_temp = get_temp_tsens_valid,
+ .calibrate = tsens_v2_calibration,
+};
+
+struct tsens_plat_data data_ipq5332 = {
+ .num_sensors = 5,
+ .ops = &ops_ipq5332,
+ .hw_ids = (unsigned int []){11, 12, 13, 14, 15},
+ .feat = &ipq5332_feat,
+ .fields = tsens_v2_regfields,
+};
+
/* Kept around for backward compatibility with old msm8996.dtsi */
struct tsens_plat_data data_8996 = {
.num_sensors = 13,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 5d2ad3b155ec..7d3b29bf14d4 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1106,6 +1106,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,ipq8074-tsens",
.data = &data_ipq8074,
+ }, {
+ .compatible = "qcom,ipq5332-tsens",
+ .data = &data_ipq5332,
}, {
.compatible = "qcom,mdm9607-tsens",
.data = &data_9607,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index b2e8f0f2b466..1dde363914cd 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -648,6 +648,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
/* TSENS v2 targets */
-extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
+extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_tsens_v2;
#endif /* __QCOM_TSENS_H__ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2023-07-12 11:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 11:35 [PATCH v2 0/5] Add IPQ5332 TSENS support Praveenkumar I
2023-07-12 11:35 ` [PATCH v2 1/5] thermal/drivers/tsens: Add TSENS enable and calibration support for V2 Praveenkumar I
2023-07-12 12:22 ` Dmitry Baryshkov
2023-07-12 12:45 ` Praveenkumar I
2023-07-12 11:35 ` [PATCH v2 2/5] dt-bindings: thermal: tsens: Add ipq5332 compatible Praveenkumar I
2023-07-12 14:25 ` Krzysztof Kozlowski
2023-07-12 16:44 ` Praveenkumar I
2023-07-12 11:35 ` [PATCH v2 3/5] arm64: dts: qcom: ipq5332: Add tsens node Praveenkumar I
2023-07-12 12:24 ` Dmitry Baryshkov
2023-07-12 12:48 ` Praveenkumar I
2023-07-12 12:53 ` Dmitry Baryshkov
2023-07-12 12:59 ` Praveenkumar I
2023-07-12 11:35 ` [PATCH v2 4/5] arm64: dts: qcom: ipq5332: Add thermal zone nodes Praveenkumar I
2023-07-12 12:25 ` Dmitry Baryshkov
2023-07-12 12:50 ` Praveenkumar I
2023-07-12 12:55 ` Dmitry Baryshkov
2023-07-12 11:35 ` Praveenkumar I [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230712113539.4029941-6-quic_ipkumar@quicinc.com \
--to=quic_ipkumar@quicinc.com \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_varada@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).