* [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
@ 2023-07-12 15:21 Lukasz Majewski
2023-07-26 8:19 ` Lukasz Majewski
0 siblings, 1 reply; 5+ messages in thread
From: Lukasz Majewski @ 2023-07-12 15:21 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
devicetree, linux-arm-kernel, linux-kernel, Lukasz Majewski
Without this change the KSZ9477-EVB board hangs just after passing
execution flow from u-boot to Linux kernel.
This code has been copied from at91-sama5d3_xplained.dts.
Test setup: Linux 6.5-rc1
Config: arch/arm/configs/sama5_defconfig
Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
.../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
index 14af1fd6d247..99cd6d15998b 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -162,6 +162,18 @@
};
};
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
2023-07-12 15:21 [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes Lukasz Majewski
@ 2023-07-26 8:19 ` Lukasz Majewski
2023-07-26 18:33 ` Conor Dooley
2023-08-02 4:50 ` claudiu beznea
0 siblings, 2 replies; 5+ messages in thread
From: Lukasz Majewski @ 2023-07-26 8:19 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
devicetree, linux-arm-kernel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1447 bytes --]
Dear Community,
> Without this change the KSZ9477-EVB board hangs just after passing
> execution flow from u-boot to Linux kernel.
>
> This code has been copied from at91-sama5d3_xplained.dts.
>
> Test setup: Linux 6.5-rc1
> Config: arch/arm/configs/sama5_defconfig
> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
> .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12
> ++++++++++++ 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
> 14af1fd6d247..99cd6d15998b 100644 ---
> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
> +162,18 @@ };
> };
>
> +&tcb0 {
> + timer0: timer@0 {
> + compatible = "atmel,tcb-timer";
> + reg = <0>;
> + };
> +
> + timer1: timer@1 {
> + compatible = "atmel,tcb-timer";
> + reg = <1>;
> + };
> +};
> +
> &usb0 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usba_vbus>;
Gentle ping on this fix ...
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
2023-07-26 8:19 ` Lukasz Majewski
@ 2023-07-26 18:33 ` Conor Dooley
2023-07-27 5:37 ` claudiu beznea
2023-08-02 4:50 ` claudiu beznea
1 sibling, 1 reply; 5+ messages in thread
From: Conor Dooley @ 2023-07-26 18:33 UTC (permalink / raw)
To: Lukasz Majewski
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nicolas Ferre,
Alexandre Belloni, Claudiu Beznea, devicetree, linux-arm-kernel,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1556 bytes --]
On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
> Dear Community,
>
> > Without this change the KSZ9477-EVB board hangs just after passing
> > execution flow from u-boot to Linux kernel.
> >
> > This code has been copied from at91-sama5d3_xplained.dts.
> >
> > Test setup: Linux 6.5-rc1
> > Config: arch/arm/configs/sama5_defconfig
> > Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
> >
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > ---
> > .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12
> > ++++++++++++ 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
> > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
> > 14af1fd6d247..99cd6d15998b 100644 ---
> > a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
> > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
> > +162,18 @@ };
> > };
> >
> > +&tcb0 {
> > + timer0: timer@0 {
> > + compatible = "atmel,tcb-timer";
> > + reg = <0>;
> > + };
> > +
> > + timer1: timer@1 {
> > + compatible = "atmel,tcb-timer";
> > + reg = <1>;
> > + };
> > +};
> > +
> > &usb0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_usba_vbus>;
>
> Gentle ping on this fix ...
Claudiu has left Microchip, so things might've got a bit lost on the
way. I've added his new address, Claudiu, will you take a look/pick this
up please? I can also do it if that is easier for you.
Thanks,
Conor.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
2023-07-26 18:33 ` Conor Dooley
@ 2023-07-27 5:37 ` claudiu beznea
0 siblings, 0 replies; 5+ messages in thread
From: claudiu beznea @ 2023-07-27 5:37 UTC (permalink / raw)
To: Conor Dooley, Lukasz Majewski
Cc: devicetree, Alexandre Belloni, linux-kernel, Conor Dooley,
Rob Herring, Krzysztof Kozlowski, Claudiu Beznea,
linux-arm-kernel
On 26.07.2023 21:33, Conor Dooley wrote:
> On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
>> Dear Community,
>>
>>> Without this change the KSZ9477-EVB board hangs just after passing
>>> execution flow from u-boot to Linux kernel.
>>>
>>> This code has been copied from at91-sama5d3_xplained.dts.
>>>
>>> Test setup: Linux 6.5-rc1
>>> Config: arch/arm/configs/sama5_defconfig
>>> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>>>
>>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>>> ---
>>> .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12
>>> ++++++++++++ 1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
>>> 14af1fd6d247..99cd6d15998b 100644 ---
>>> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
>>> +162,18 @@ };
>>> };
>>>
>>> +&tcb0 {
>>> + timer0: timer@0 {
>>> + compatible = "atmel,tcb-timer";
>>> + reg = <0>;
>>> + };
>>> +
>>> + timer1: timer@1 {
>>> + compatible = "atmel,tcb-timer";
>>> + reg = <1>;
>>> + };
>>> +};
>>> +
>>> &usb0 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&pinctrl_usba_vbus>;
>>
>> Gentle ping on this fix ...
>
> Claudiu has left Microchip, so things might've got a bit lost on the
> way. I've added his new address, Claudiu, will you take a look/pick this
> up please? I can also do it if that is easier for you.
It's on my list.
Thanks,
Claudiu
>
> Thanks,
> Conor.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
2023-07-26 8:19 ` Lukasz Majewski
2023-07-26 18:33 ` Conor Dooley
@ 2023-08-02 4:50 ` claudiu beznea
1 sibling, 0 replies; 5+ messages in thread
From: claudiu beznea @ 2023-08-02 4:50 UTC (permalink / raw)
To: Lukasz Majewski, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, Conor Dooley, Alexandre Belloni, linux-kernel,
Claudiu Beznea, linux-arm-kernel
On 26.07.2023 11:19, Lukasz Majewski wrote:
> Dear Community,
>
>> Without this change the KSZ9477-EVB board hangs just after passing
>> execution flow from u-boot to Linux kernel.
>>
>> This code has been copied from at91-sama5d3_xplained.dts.
>>
>> Test setup: Linux 6.5-rc1
>> Config: arch/arm/configs/sama5_defconfig
>> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>>
>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
Applied to at91-dt, thanks!
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-08-02 4:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-12 15:21 [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes Lukasz Majewski
2023-07-26 8:19 ` Lukasz Majewski
2023-07-26 18:33 ` Conor Dooley
2023-07-27 5:37 ` claudiu beznea
2023-08-02 4:50 ` claudiu beznea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).