[PATCH v1 2/2] riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy

[Samin Guo <samin.guo@starfivetech.com>]

v1.3B:
  v1.3B uses motorcomm YT8531(rgmii-id phy) x2, need delay and
  inverse configurations.
  The tx_clk of v1.3B uses an external clock and needs to be
  switched to an external clock source.

v1.2A:
  v1.2A gmac0 uses motorcomm YT8531(rgmii-id) PHY, and needs delay
  configurations.
  v1.2A gmac1 uses motorcomm YT8512(rmii) PHY, and needs to
  switch rx and rx to external clock sources.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2-v1.2a.dts    | 13 +++++++
 .../jh7110-starfive-visionfive-2-v1.3b.dts    | 31 +++++++++++++++++
 .../jh7110-starfive-visionfive-2.dtsi         | 34 +++++++++++++++++++
 3 files changed, 78 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
index 4af3300f3cf3..205a13d8c8b1 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -11,3 +11,16 @@
 	model = "StarFive VisionFive 2 v1.2A";
 	compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
 };
+
+&gmac1 {
+	phy-mode = "rmii";
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+			  <&syscrg JH7110_SYSCLK_GMAC1_RX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1350>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
index 9230cc3d8946..36f74d4eda01 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -11,3 +11,34 @@
 	model = "StarFive VisionFive 2 v1.3B";
 	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
 };
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	motorcomm,rx-clk-driver-strength = <3970>;
+	motorcomm,rx-data-driver-strength = <2910>;
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+};
+
+&phy1 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,rx-clk-driver-strength = <3970>;
+	motorcomm,rx-data-driver-strength = <2910>;
+	rx-internal-delay-ps = <300>;
+	tx-internal-delay-ps = <0>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index fa0061eb33a7..fcb45db42df5 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -11,6 +11,8 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 		i2c0 = &i2c0;
 		i2c2 = &i2c2;
 		i2c5 = &i2c5;
@@ -86,6 +88,38 @@
 	clock-frequency = <49152000>;
 };
 
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <0>;
+		};
+	};
+};
+
 &i2c0 {
 	clock-frequency = <100000>;
 	i2c-sda-hold-time-ns = <300>;
-- 
2.17.1