From: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
To: linux-kernel@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Stephan Gerhold <stephan@gerhold.net>,
Nikita Travkin <nikita@trvn.ru>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht
Subject: [PATCH] arm64: dts: qcom: msm8916-samsung-j5-common: Add touchscreen
Date: Sat, 15 Jul 2023 21:41:01 +0000 [thread overview]
Message-ID: <20230715214046.14902-1-linmengbo0689@protonmail.com> (raw)
J5 and J5X use an Imagis IST3038C touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
MFD driver for SM5703 is unavailable at the moment, which is required
to power up the touchscreen on J5, so it's disabled on J5 for now.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
---
.../dts/qcom/msm8916-samsung-j5-common.dtsi | 29 +++++++++++++++++++
.../boot/dts/qcom/msm8916-samsung-j5.dts | 8 +++++
.../boot/dts/qcom/msm8916-samsung-j5x.dts | 26 +++++++++++++++++
3 files changed, 63 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index f4fd5d72b28b..cb0e4a7faf91 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -86,6 +86,26 @@ muic: extcon@25 {
};
};
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@50 {
+ compatible = "imagis,ist3038c";
+ reg = <0x50>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
&blsp_uart2 {
status = "okay";
};
@@ -162,6 +182,15 @@ muic_int_default: muic-int-default-state {
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_default: tsp-int-default-state {
+ pins = "gpio13";
+ function = "gpio";
+
drive-strength = <2>;
bias-disable;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 0a32d33e9778..3e1ff5b4d2d7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -10,6 +10,14 @@ / {
chassis-type = "handset";
};
+&blsp_i2c5 {
+ status = "disabled";
+};
+
+&touchscreen {
+ /* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
+};
+
&usb_hs_phy {
qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
index 7e1326cc13c5..b2fe109723d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
@@ -8,12 +8,38 @@ / {
model = "Samsung Galaxy J5 (2016)";
compatible = "samsung,j5x", "qcom,msm8916";
chassis-type = "handset";
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_tsp_a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_ldo_en_default>;
+ pinctrl-names = "default";
+ };
};
&muic {
interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
};
+&touchscreen {
+ vdd-supply = <®_vdd_tsp_a>;
+};
+
+&tlmm {
+ tsp_ldo_en_default: tsp-ldo-en-default-state {
+ pins = "gpio108";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
&muic_int_default {
pins = "gpio121";
};
--
2.39.2
next reply other threads:[~2023-07-15 21:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-15 21:41 Lin, Meng-Bo [this message]
2023-07-22 5:17 ` [PATCH] arm64: dts: qcom: msm8916-samsung-j5-common: Add touchscreen Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230715214046.14902-1-linmengbo0689@protonmail.com \
--to=linmengbo0689@protonmail.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nikita@trvn.ru \
--cc=robh+dt@kernel.org \
--cc=stephan@gerhold.net \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).