devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Andy Gross <agross@kernel.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
	 linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	 Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2 00/15] Unregister critical branch clocks + some RPM
Date: Wed, 29 Nov 2023 19:59:19 +0100	[thread overview]
Message-ID: <20230717-topic-branch_aon_cleanup-v2-0-2a583460ef26@linaro.org> (raw)

On Qualcomm SoCs, certain branch clocks either need to be always-on, or
should be if you're interested in touching some part of the hardware.

Using CLK_IS_CRITICAL for this purpose sounds like a genius idea,
however that messes with the runtime pm handling - if a clock is
marked as such, the clock controller device will never enter the
"suspended" state, leaving the associated resources online, which in
turn breaks SoC-wide suspend.

This series aims to solve that on a couple SoCs that I could test the
changes on and it sprinkles some runtime pm enablement atop these drivers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes in v2:
- Rebase
- Pick up tags
- Fix up missing pm_runtime_put in SM6375 GCC (Johan)
- Clarify the commit message of "Add runtime PM" commits (Johan)
- "GPU_CCC" -> "GPU_CC" (oops)
- Rebase atop next-20231129
  - Also fix up camcc-sm8550 & gcc-sm4450
  - Unify and clean up the comment style
  - Fix missing comments in gcc-sc7180..
  - Drop Johan's ack from "clk: qcom: Use qcom_branch_set_clk_en()"
- Improve 6115 dt patch commit message (Bjorn)
- Link to v1: https://lore.kernel.org/r/20230717-topic-branch_aon_cleanup-v1-0-27784d27a4f4@linaro.org

---
Konrad Dybcio (15):
      clk: qcom: branch: Add a helper for setting the enable bit
      clk: qcom: Use qcom_branch_set_clk_en()
      clk: qcom: gcc-sm6375: Unregister critical clocks
      clk: qcom: gcc-sm6375: Add runtime PM
      clk: qcom: gpucc-sm6375: Unregister critical clocks
      clk: qcom: gpucc-sm6115: Unregister critical clocks
      clk: qcom: gpucc-sm6115: Add runtime PM
      clk: qcom: gcc-sm6115: Unregister critical clocks
      clk: qcom: gcc-sm6115: Add runtime PM
      clk: qcom: gcc-qcm2290: Unregister critical clocks
      clk: qcom: gcc-qcm2290: Add runtime PM
      arm64: dts: qcom: sm6375: Add VDD_CX to GCC
      arm64: dts: qcom: qcm2290: Add VDD_CX to GCC
      arm64: dts: qcom: sm6115: Add VDD_CX to GCC
      arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CC

 arch/arm64/boot/dts/qcom/qcm2290.dtsi |   1 +
 arch/arm64/boot/dts/qcom/sm6115.dtsi  |   3 +
 arch/arm64/boot/dts/qcom/sm6375.dtsi  |   1 +
 drivers/clk/qcom/camcc-sm8550.c       |   9 +--
 drivers/clk/qcom/clk-branch.h         |   7 ++
 drivers/clk/qcom/dispcc-qcm2290.c     |   3 +-
 drivers/clk/qcom/dispcc-sc7280.c      |   6 +-
 drivers/clk/qcom/dispcc-sc8280xp.c    |   3 +-
 drivers/clk/qcom/dispcc-sm6115.c      |   3 +-
 drivers/clk/qcom/dispcc-sm8250.c      |   3 +-
 drivers/clk/qcom/dispcc-sm8450.c      |   6 +-
 drivers/clk/qcom/dispcc-sm8550.c      |   6 +-
 drivers/clk/qcom/gcc-qcm2290.c        | 127 ++++++-----------------------
 drivers/clk/qcom/gcc-sa8775p.c        |  24 +++---
 drivers/clk/qcom/gcc-sc7180.c         |  21 ++---
 drivers/clk/qcom/gcc-sc7280.c         |  19 ++---
 drivers/clk/qcom/gcc-sc8180x.c        |  27 +++----
 drivers/clk/qcom/gcc-sc8280xp.c       |  24 +++---
 drivers/clk/qcom/gcc-sdx55.c          |  11 +--
 drivers/clk/qcom/gcc-sdx65.c          |  12 +--
 drivers/clk/qcom/gcc-sdx75.c          |   9 +--
 drivers/clk/qcom/gcc-sm4450.c         |  27 ++-----
 drivers/clk/qcom/gcc-sm6115.c         | 145 +++++++---------------------------
 drivers/clk/qcom/gcc-sm6375.c         | 126 +++++++----------------------
 drivers/clk/qcom/gcc-sm7150.c         |  22 ++----
 drivers/clk/qcom/gcc-sm8250.c         |  18 ++---
 drivers/clk/qcom/gcc-sm8350.c         |  19 ++---
 drivers/clk/qcom/gcc-sm8450.c         |  20 ++---
 drivers/clk/qcom/gcc-sm8550.c         |  20 ++---
 drivers/clk/qcom/gpucc-sc7280.c       |   8 +-
 drivers/clk/qcom/gpucc-sc8280xp.c     |   8 +-
 drivers/clk/qcom/gpucc-sm6115.c       |  52 +++++-------
 drivers/clk/qcom/gpucc-sm6375.c       |  33 +-------
 drivers/clk/qcom/gpucc-sm8550.c       |   9 +--
 drivers/clk/qcom/lpasscorecc-sc7180.c |   6 +-
 drivers/clk/qcom/videocc-sm8250.c     |   5 +-
 drivers/clk/qcom/videocc-sm8350.c     |   9 +--
 drivers/clk/qcom/videocc-sm8450.c     |  12 +--
 drivers/clk/qcom/videocc-sm8550.c     |  12 +--
 39 files changed, 236 insertions(+), 640 deletions(-)
---
base-commit: 1f5c003694fab4b1ba6cbdcc417488b975c088d0
change-id: 20230717-topic-branch_aon_cleanup-6976c13fe71c

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@linaro.org>


             reply	other threads:[~2023-11-29 18:59 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-29 18:59 Konrad Dybcio [this message]
2023-11-29 18:59 ` [PATCH v2 01/15] clk: qcom: branch: Add a helper for setting the enable bit Konrad Dybcio
2023-11-29 20:53   ` Bryan O'Donoghue
2023-11-29 18:59 ` [PATCH v2 02/15] clk: qcom: Use qcom_branch_set_clk_en() Konrad Dybcio
2023-11-29 20:59   ` Bryan O'Donoghue
2023-11-29 22:05     ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 03/15] clk: qcom: gcc-sm6375: Unregister critical clocks Konrad Dybcio
2023-11-29 21:08   ` Bryan O'Donoghue
2023-11-29 22:08     ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 04/15] clk: qcom: gcc-sm6375: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 05/15] clk: qcom: gpucc-sm6375: Unregister critical clocks Konrad Dybcio
2023-11-29 21:10   ` Bryan O'Donoghue
2023-11-29 18:59 ` [PATCH v2 06/15] clk: qcom: gpucc-sm6115: " Konrad Dybcio
2023-11-29 21:14   ` Bryan O'Donoghue
2023-11-29 22:09     ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 07/15] clk: qcom: gpucc-sm6115: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 08/15] clk: qcom: gcc-sm6115: Unregister critical clocks Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 09/15] clk: qcom: gcc-sm6115: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 10/15] clk: qcom: gcc-qcm2290: Unregister critical clocks Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 11/15] clk: qcom: gcc-qcm2290: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 12/15] arm64: dts: qcom: sm6375: Add VDD_CX to GCC Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 13/15] arm64: dts: qcom: qcm2290: " Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 14/15] arm64: dts: qcom: sm6115: " Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 15/15] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CC Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717-topic-branch_aon_cleanup-v2-0-2a583460ef26@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).