From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH v2 06/15] clk: qcom: gpucc-sm6115: Unregister critical clocks
Date: Wed, 29 Nov 2023 19:59:25 +0100 [thread overview]
Message-ID: <20230717-topic-branch_aon_cleanup-v2-6-2a583460ef26@linaro.org> (raw)
In-Reply-To: <20230717-topic-branch_aon_cleanup-v2-0-2a583460ef26@linaro.org>
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/clk/qcom/gpucc-sm6115.c | 33 +++------------------------------
1 file changed, 3 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6115.c b/drivers/clk/qcom/gpucc-sm6115.c
index fb71c21c9a89..93a50431aef8 100644
--- a/drivers/clk/qcom/gpucc-sm6115.c
+++ b/drivers/clk/qcom/gpucc-sm6115.c
@@ -234,20 +234,6 @@ static struct clk_rcg2 gpu_cc_gx_gfx3d_clk_src = {
},
};
-static struct clk_branch gpu_cc_ahb_clk = {
- .halt_reg = 0x1078,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1078,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpu_cc_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpu_cc_crc_ahb_clk = {
.halt_reg = 0x107c,
.halt_check = BRANCH_HALT_DELAY,
@@ -336,20 +322,6 @@ static struct clk_branch gpu_cc_cxo_clk = {
},
};
-static struct clk_branch gpu_cc_gx_cxo_clk = {
- .halt_reg = 0x1060,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1060,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpu_cc_gx_cxo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpu_cc_gx_gfx3d_clk = {
.halt_reg = 0x1054,
.halt_check = BRANCH_HALT_SKIP,
@@ -418,7 +390,6 @@ static struct gdsc gpu_gx_gdsc = {
};
static struct clk_regmap *gpu_cc_sm6115_clocks[] = {
- [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
[GPU_CC_CX_GFX3D_CLK] = &gpu_cc_cx_gfx3d_clk.clkr,
[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
@@ -426,7 +397,6 @@ static struct clk_regmap *gpu_cc_sm6115_clocks[] = {
[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
- [GPU_CC_GX_CXO_CLK] = &gpu_cc_gx_cxo_clk.clkr,
[GPU_CC_GX_GFX3D_CLK] = &gpu_cc_gx_gfx3d_clk.clkr,
[GPU_CC_GX_GFX3D_CLK_SRC] = &gpu_cc_gx_gfx3d_clk_src.clkr,
[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
@@ -488,6 +458,9 @@ static int gpu_cc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_force_mem_core(regmap, gpu_cc_gx_gfx3d_clk, true);
qcom_branch_set_force_periph_on(regmap, gpu_cc_gx_gfx3d_clk, true);
+ qcom_branch_set_clk_en(regmap, 0x1078); /* GPU_CC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1060); /* GPU_CC_GX_CXO_CLK */
+
return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
}
--
2.43.0
next prev parent reply other threads:[~2023-11-29 18:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 18:59 [PATCH v2 00/15] Unregister critical branch clocks + some RPM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 01/15] clk: qcom: branch: Add a helper for setting the enable bit Konrad Dybcio
2023-11-29 20:53 ` Bryan O'Donoghue
2023-11-29 18:59 ` [PATCH v2 02/15] clk: qcom: Use qcom_branch_set_clk_en() Konrad Dybcio
2023-11-29 20:59 ` Bryan O'Donoghue
2023-11-29 22:05 ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 03/15] clk: qcom: gcc-sm6375: Unregister critical clocks Konrad Dybcio
2023-11-29 21:08 ` Bryan O'Donoghue
2023-11-29 22:08 ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 04/15] clk: qcom: gcc-sm6375: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 05/15] clk: qcom: gpucc-sm6375: Unregister critical clocks Konrad Dybcio
2023-11-29 21:10 ` Bryan O'Donoghue
2023-11-29 18:59 ` Konrad Dybcio [this message]
2023-11-29 21:14 ` [PATCH v2 06/15] clk: qcom: gpucc-sm6115: " Bryan O'Donoghue
2023-11-29 22:09 ` Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 07/15] clk: qcom: gpucc-sm6115: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 08/15] clk: qcom: gcc-sm6115: Unregister critical clocks Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 09/15] clk: qcom: gcc-sm6115: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 10/15] clk: qcom: gcc-qcm2290: Unregister critical clocks Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 11/15] clk: qcom: gcc-qcm2290: Add runtime PM Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 12/15] arm64: dts: qcom: sm6375: Add VDD_CX to GCC Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 13/15] arm64: dts: qcom: qcm2290: " Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 14/15] arm64: dts: qcom: sm6115: " Konrad Dybcio
2023-11-29 18:59 ` [PATCH v2 15/15] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CC Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230717-topic-branch_aon_cleanup-v2-6-2a583460ef26@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).