devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tim Harvey <tharvey@gateworks.com>
To: Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH v2] arm64: dts: imx8mp: add imx8mp-venice-gw74xx-rpidsi overlay for display
Date: Wed, 19 Jul 2023 08:29:20 -0700	[thread overview]
Message-ID: <20230719152920.2173-1-tharvey@gateworks.com> (raw)

Add support for the following Raspberry Pi displays:
 - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
 - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch

Both have the following hardware:
 - FocalTech FT5406 10pt touch controller (with no interrupt)
 - Powertip PH800480T013-IDF02 compatible panel
 - Toshiba TC358762 compatible DSI to DBI bridge
 - ATTINY based regulator used for backlight controller and panel enable

Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2:
 - add newline between properties and child nodes
---
 arch/arm64/boot/dts/freescale/Makefile        |  2 +
 .../imx8mp-venice-gw74xx-rpidsi.dtso          | 87 +++++++++++++++++++
 2 files changed, 89 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 454b07ed09fc..60a69e114442 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -156,6 +156,7 @@ imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice
 imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
 imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
 imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-rpidsi-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb
@@ -167,6 +168,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
 dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
new file mode 100644
index 000000000000..6a39f43435c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
-- 
2.25.1


             reply	other threads:[~2023-07-19 15:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-19 15:29 Tim Harvey [this message]
2023-07-30 12:24 ` [PATCH v2] arm64: dts: imx8mp: add imx8mp-venice-gw74xx-rpidsi overlay for display Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230719152920.2173-1-tharvey@gateworks.com \
    --to=tharvey@gateworks.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).