From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Georgi Djakov <djakov@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawn.guo@linaro.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 6/7] dt-bindings: interconnect: qcom: Fix and separate out MSM8996
Date: Fri, 21 Jul 2023 15:54:16 +0200 [thread overview]
Message-ID: <20230721-topic-icc_bindings-v1-6-93e2bc728fb7@linaro.org> (raw)
In-Reply-To: <20230721-topic-icc_bindings-v1-0-93e2bc728fb7@linaro.org>
Separate out MSM8996 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../bindings/interconnect/qcom,msm8996.yaml | 165 +++++++++++++++++++++
.../devicetree/bindings/interconnect/qcom,rpm.yaml | 81 ----------
2 files changed, 165 insertions(+), 81 deletions(-)
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
new file mode 100644
index 000000000000..c003ca5ee746
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Network-On-Chip interconnect
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+ The Qualcomm MSM8996 interconnect providers support adjusting the
+ bandwidth requirements between the various NoC fabrics.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8996-a0noc
+ - qcom,msm8996-a1noc
+ - qcom,msm8996-a2noc
+ - qcom,msm8996-bimc
+ - qcom,msm8996-cnoc
+ - qcom,msm8996-mnoc
+ - qcom,msm8996-pnoc
+ - qcom,msm8996-snoc
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: qcom,rpm-common.yaml#
+ - if:
+ properties:
+ compatible:
+ const: qcom,msm8996-a0noc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Aggregate0 System NoC AXI Clock.
+ - description: Aggregate0 Config NoC AHB Clock.
+ - description: Aggregate0 NoC MPU Clock.
+
+ clock-names:
+ items:
+ - const: aggre0_snoc_axi
+ - const: aggre0_cnoc_ahb
+ - const: aggre0_noc_mpu_cfg
+
+ required:
+ - power-domains
+
+ - if:
+ properties:
+ compatible:
+ const: qcom,msm8996-mnoc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: CPU-NoC High-performance Bus Clock.
+
+ clock-names:
+ const: iface
+
+ - if:
+ properties:
+ compatible:
+ const: qcom,msm8996-a2noc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Aggregate2 NoC UFS AXI Clock
+ - description: UFS AXI Clock
+
+ clock-names:
+ items:
+ - const: aggre2_ufs_axi
+ - const: ufs_axi
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+ #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+
+ bimc: interconnect@408000 {
+ compatible = "qcom,msm8996-bimc";
+ reg = <0x00408000 0x5a000>;
+ #interconnect-cells = <1>;
+ };
+
+ cnoc: interconnect@500000 {
+ compatible = "qcom,msm8996-cnoc";
+ reg = <0x00500000 0x1000>;
+ #interconnect-cells = <1>;
+ };
+
+ snoc: interconnect@524000 {
+ compatible = "qcom,msm8996-snoc";
+ reg = <0x00524000 0x1c000>;
+ #interconnect-cells = <1>;
+ };
+
+ a0noc: interconnect@543000 {
+ compatible = "qcom,msm8996-a0noc";
+ reg = <0x00543000 0x6000>;
+ #interconnect-cells = <1>;
+ clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+ <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+ <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+ clock-names = "aggre0_snoc_axi",
+ "aggre0_cnoc_ahb",
+ "aggre0_noc_mpu_cfg";
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ };
+
+ a1noc: interconnect@562000 {
+ compatible = "qcom,msm8996-a1noc";
+ reg = <0x00562000 0x5000>;
+ #interconnect-cells = <1>;
+ };
+
+ a2noc: interconnect@583000 {
+ compatible = "qcom,msm8996-a2noc";
+ reg = <0x00583000 0x7000>;
+ clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AXI_CLK>;
+ clock-names = "aggre2_ufs_axi",
+ "ufs_axi";
+ #interconnect-cells = <1>;
+ };
+
+ mnoc: interconnect@5a4000 {
+ compatible = "qcom,msm8996-mnoc";
+ reg = <0x005a4000 0x1c000>;
+ clocks = <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ #interconnect-cells = <1>;
+ };
+
+ pnoc: interconnect@5c0000 {
+ compatible = "qcom,msm8996-pnoc";
+ reg = <0x005c0000 0x3000>;
+ #interconnect-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 00fe355f26de..6f8836312496 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -23,14 +23,6 @@ properties:
- qcom,msm8939-bimc
- qcom,msm8939-pcnoc
- qcom,msm8939-snoc
- - qcom,msm8996-a0noc
- - qcom,msm8996-a1noc
- - qcom,msm8996-a2noc
- - qcom,msm8996-bimc
- - qcom,msm8996-cnoc
- - qcom,msm8996-mnoc
- - qcom,msm8996-pnoc
- - qcom,msm8996-snoc
'#interconnect-cells':
description: |
@@ -100,11 +92,6 @@ allOf:
- qcom,msm8939-bimc
- qcom,msm8939-pcnoc
- qcom,msm8939-snoc
- - qcom,msm8996-a1noc
- - qcom,msm8996-bimc
- - qcom,msm8996-cnoc
- - qcom,msm8996-pnoc
- - qcom,msm8996-snoc
then:
properties:
@@ -118,74 +105,6 @@ allOf:
- description: Bus Clock
- description: Bus A Clock
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,msm8996-mnoc
-
- then:
- properties:
- clock-names:
- items:
- - const: bus
- - const: bus_a
- - const: iface
-
- clocks:
- items:
- - description: Bus Clock.
- - description: Bus A Clock.
- - description: CPU-NoC High-performance Bus Clock.
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,msm8996-a0noc
-
- then:
- properties:
- clock-names:
- items:
- - const: aggre0_snoc_axi
- - const: aggre0_cnoc_ahb
- - const: aggre0_noc_mpu_cfg
-
- clocks:
- items:
- - description: Aggregate0 System NoC AXI Clock.
- - description: Aggregate0 Config NoC AHB Clock.
- - description: Aggregate0 NoC MPU Clock.
-
- required:
- - power-domains
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,msm8996-a2noc
-
- then:
- properties:
- clock-names:
- items:
- - const: bus
- - const: bus_a
- - const: aggre2_ufs_axi
- - const: ufs_axi
-
- clocks:
- items:
- - description: Bus Clock
- - description: Bus A Clock
- - description: Aggregate2 NoC UFS AXI Clock
- - description: UFS AXI Clock
-
- if:
not:
properties:
--
2.41.0
next prev parent reply other threads:[~2023-07-21 13:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-21 13:54 [PATCH 0/7] Update RPM ICC bindings Konrad Dybcio
2023-07-21 13:54 ` [PATCH 1/7] dt-bindings: interconnect: qcom: Introduce qcom,rpm-common Konrad Dybcio
2023-07-22 9:35 ` Krzysztof Kozlowski
2023-07-21 13:54 ` [PATCH 2/7] dt-bindings: interconnect: qcom: qcm2290: Remove RPM bus clocks Konrad Dybcio
2023-07-22 9:36 ` Krzysztof Kozlowski
2023-07-21 13:54 ` [PATCH 3/7] dt-bindings: interconnect: qcom: Fix and separate out MSM8916 Konrad Dybcio
2023-07-22 9:38 ` Krzysztof Kozlowski
2023-07-21 13:54 ` [PATCH 4/7] dt-bindings: interconnect: qcom: Fix and separate out QCS404 Konrad Dybcio
2023-07-22 9:40 ` Krzysztof Kozlowski
2023-07-21 13:54 ` [PATCH 5/7] dt-bindings: interconnect: qcom: Fix and separate out SDM660 Konrad Dybcio
2023-07-22 9:41 ` Krzysztof Kozlowski
2023-07-21 13:54 ` Konrad Dybcio [this message]
2023-07-21 13:54 ` [PATCH 7/7] dt-bindings: interconnect: qcom: Fix and separate out MSM8939 Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230721-topic-icc_bindings-v1-6-93e2bc728fb7@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).