[PATCH v4 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[PATCH v4 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[David Wronek]

This series introduces support for the Qualcomm SM7125 SoC and the
Xiaomi SM7125 platform.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/20230704163848.169853-2-davidwronek@gmail.com/

Changes in v3:
- Disable pm6150 rtc by default
- Fix wrong pm8150l PMIC in joyeuse dts
- Link to v2: https://lore.kernel.org/all/20230706124339.134272-1-davidwronek@gmail.com/

Changes in v4:
- Fix key-vol-down node name
- Link to v3: https://lore.kernel.org/all/20230715091932.161507-1-davidwronek@gmail.com/

---
David Wronek (7):
  clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
  dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
  dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
  soc: qcom: socinfo: Add SoC ID for SM7125
  arm64: dts: qcom: pm6150: Add resin and rtc nodes
  arm64: dts: qcom: Add SM7125 device tree
  arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7125.dtsi          |  16 +
 drivers/clk/qcom/gcc-sc7180.c                 |   1 +
 drivers/soc/qcom/socinfo.c                    |   1 +
 include/dt-bindings/arm/qcom,ids.h            |   1 +
 9 files changed, 482 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi

-- 
2.41.0

[PATCH v4 1/7] clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

[David Wronek]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index ede83c644716..a3406aadbd17 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_data = gcc_parent_data_5,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_5),
+		.flags = CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_rcg2_floor_ops,
 	},
 };
-- 
2.41.0

[PATCH v4 2/7] dt-bindings: arm: qcom,ids: Add SoC ID for SM7125

[David Wronek]

Add the SoC ID for Qualcomm SM7125.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 include/dt-bindings/arm/qcom,ids.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index bcbe9ee2cdaf..6a8dd2e42b24 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -215,6 +215,7 @@
 #define QCOM_ID_SDA429W			437
 #define QCOM_ID_SM8350			439
 #define QCOM_ID_QCM2290			441
+#define QCOM_ID_SM7125			443
 #define QCOM_ID_SM6115			444
 #define QCOM_ID_IPQ5010			446
 #define QCOM_ID_IPQ5018			447
-- 
2.41.0

[PATCH v4 3/7] dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board

[David Wronek]

Document the xiaomi,joyeuse board based on the Qualcomm SM7125 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 450f616774e0..a403c433e9b5 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -77,6 +77,7 @@ description: |
         sm6125
         sm6350
         sm6375
+        sm7125
         sm7225
         sm8150
         sm8250
@@ -929,6 +930,11 @@ properties:
               - sony,pdx225
           - const: qcom,sm6375
 
+      - items:
+          - enum:
+              - xiaomi,joyeuse
+          - const: qcom,sm7125
+
       - items:
           - enum:
               - fairphone,fp4
@@ -1072,6 +1078,7 @@ allOf:
               - qcom,sm6115
               - qcom,sm6125
               - qcom,sm6350
+              - qcom,sm7125
               - qcom,sm7225
               - qcom,sm8150
               - qcom,sm8250
-- 
2.41.0

[PATCH v4 4/7] soc: qcom: socinfo: Add SoC ID for SM7125

[David Wronek]

Add the SoC ID entry for Qualcomm SM7125.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/soc/qcom/socinfo.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 4d49945b3a35..785b88e2da54 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -371,6 +371,7 @@ static const struct soc_id soc_id[] = {
 	{ qcom_board_id(SDA429W) },
 	{ qcom_board_id(SM8350) },
 	{ qcom_board_id(QCM2290) },
+	{ qcom_board_id(SM7125) },
 	{ qcom_board_id(SM6115) },
 	{ qcom_board_id(IPQ5010) },
 	{ qcom_board_id(IPQ5018) },
-- 
2.41.0

[PATCH v4 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

[David Wronek]

Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device, both disabled by default.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 2e6afa296141..af51eb0646ba 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
+		pm6150_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.41.0

[PATCH v4 6/7] arm64: dts: qcom: Add SM7125 device tree

[David Wronek]

The Snapdragon 720G (sm7125) is software-wise very similar to the
Snapdragon 7c with minor differences in clock speeds and as added here,
it uses the Kryo 465 instead of Kryo 468.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
new file mode 100644
index 000000000000..12dd72859a43
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&CPU0 { compatible = "qcom,kryo465"; };
+&CPU1 { compatible = "qcom,kryo465"; };
+&CPU2 { compatible = "qcom,kryo465"; };
+&CPU3 { compatible = "qcom,kryo465"; };
+&CPU4 { compatible = "qcom,kryo465"; };
+&CPU5 { compatible = "qcom,kryo465"; };
+&CPU6 { compatible = "qcom,kryo465"; };
+&CPU7 { compatible = "qcom,kryo465"; };
-- 
2.41.0

[PATCH v4 7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

[David Wronek]

There are 6 Xiaomi smartphones with the SM7125 SoC:

- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)

These devices share a common board design (a.k.a miatoll) with only a
few differences. Add support for the common board, as well as support
for the global Redmi Note 9 Pro.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++
 3 files changed, 440 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..7ef9e7d43904 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
new file mode 100644
index 000000000000..2b3d1ed1bcae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-miatoll.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9 Pro (Global)";
+	compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x50022 1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
new file mode 100644
index 000000000000..e55cd83c19b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7125.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM7125 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8400000>;
+			no-map;
+		};
+
+		venus_mem: memory@8ee00000 {
+			reg = <0x0 0x8ee00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@8f300000 {
+			reg = <0x0 0x8f300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@91100000 {
+			reg = <0x0 0x91100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: memory@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		gpu_mem: memory@93b15000 {
+			reg = <0x0 0x93b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@9d800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9d800000 0x0 0x400000>;
+			record-size = <0x80000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x100000>;
+		};
+
+		rmtfs_mem: memory@fa601000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xfa601000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a_0p88: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p664: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p1: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_3p0: ldo18 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p23: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_3p0: ldo6 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6150_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm6150_rtc {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_3p0>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p88>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};
-- 
2.41.0

Re: [PATCH v4 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[Marijn Suijten]

On 2023-07-23 21:05:01, David Wronek wrote:
> This series introduces support for the Qualcomm SM7125 SoC and the
> Xiaomi SM7125 platform.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
> Changes in v2:
> - Allow qcom,board-id and qcom,msm-id properties
> - Use QCOM_SCM_VMID_MSS_MSA definition
> - Change initial regulator modes from LPM to HPM
> - Move status to the bottom of nodes
> - Fix up PM6150 interrupts
> - Move clk patch to beginning of series
> - Fix up copyright
> - Take ownership of all commits with permission
> - Link to v1: https://lore.kernel.org/all/20230704163848.169853-2-davidwronek@gmail.com/
> 
> Changes in v3:
> - Disable pm6150 rtc by default
> - Fix wrong pm8150l PMIC in joyeuse dts
> - Link to v2: https://lore.kernel.org/all/20230706124339.134272-1-davidwronek@gmail.com/
> 
> Changes in v4:
> - Fix key-vol-down node name
> - Link to v3: https://lore.kernel.org/all/20230715091932.161507-1-davidwronek@gmail.com/
> 
> ---
> David Wronek (7):
>   clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
>   dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
>   dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
>   soc: qcom: socinfo: Add SoC ID for SM7125
>   arm64: dts: qcom: pm6150: Add resin and rtc nodes
>   arm64: dts: qcom: Add SM7125 device tree
>   arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
> 
>  .../devicetree/bindings/arm/qcom.yaml         |   7 +
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  arch/arm64/boot/dts/qcom/pm6150.dtsi          |  16 +
>  .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
>  .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++

As brought up on IRC, making it official review by reposting it here on
the lists: Since mi+atoll seems to be a community made-up name, perhaps
this file should just be named sm7125-xiomi-common.dtsi, matching
similar Xiaomi and OnePlus devices with shared DTSI?

Otherwise, just like Sony devices where an official board name _is
known_ the device DTS file should have been named
sm7125-xiaomi-miatoll-joyeuse.dts instead?

- Marijn

>  arch/arm64/boot/dts/qcom/sm7125.dtsi          |  16 +
>  drivers/clk/qcom/gcc-sc7180.c                 |   1 +
>  drivers/soc/qcom/socinfo.c                    |   1 +
>  include/dt-bindings/arm/qcom,ids.h            |   1 +
>  9 files changed, 482 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
> 
> -- 
> 2.41.0
> 

Re: (subset) [PATCH v4 0/7] Add initial support for SM7125 and Xiaomi SM7125 platform

[Bjorn Andersson]

On Sun, 23 Jul 2023 21:05:01 +0200, David Wronek wrote:
> This series introduces support for the Qualcomm SM7125 SoC and the
> Xiaomi SM7125 platform.
> 
> 

Applied, thanks!

[3/7] dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
      commit: 9b4adf37fdc0ca8cd1d14b4160e2f04b63df98e6
[5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes
      commit: ec053ec90c245a4efc8dda87d9207de0adf0040e
[6/7] arm64: dts: qcom: Add SM7125 device tree
      commit: 72fbf05149bd451e7222c2ed1e3823972f19df9c
[7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
      commit: 7d65d4b7d70fb9560ce9baaf4219fb24646bd578

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>