devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Huqiang Qin <huqiang.qin@amlogic.com>
To: <wim@linux-watchdog.org>, <linux@roeck-us.net>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>
Cc: <linux-watchdog@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Huqiang Qin <huqiang.qin@amlogic.com>
Subject: [PATCH 2/4] watchdog: Add a new struct for Amlogic-GXBB driver
Date: Wed, 26 Jul 2023 19:21:44 +0800	[thread overview]
Message-ID: <20230726112146.1127145-3-huqiang.qin@amlogic.com> (raw)
In-Reply-To: <20230726112146.1127145-1-huqiang.qin@amlogic.com>

Add a new structure wdt_params to describe the watchdog difference
of different chips.

Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
---
 drivers/watchdog/meson_gxbb_wdt.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index 35d80cb39856..a6c0d743b607 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -22,7 +22,6 @@
 
 #define GXBB_WDT_CTRL_CLKDIV_EN			BIT(25)
 #define GXBB_WDT_CTRL_CLK_EN			BIT(24)
-#define GXBB_WDT_CTRL_EE_RESET			BIT(21)
 #define GXBB_WDT_CTRL_EN			BIT(18)
 #define GXBB_WDT_CTRL_DIV_MASK			(BIT(18) - 1)
 
@@ -45,6 +44,10 @@ struct meson_gxbb_wdt {
 	struct clk *clk;
 };
 
+struct wdt_params {
+	u8 rst_shift;
+};
+
 static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev)
 {
 	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
@@ -140,8 +143,12 @@ static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume)
 };
 
+static const struct wdt_params gxbb_params = {
+	.rst_shift = 21,
+};
+
 static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
-	 { .compatible = "amlogic,meson-gxbb-wdt", },
+	 { .compatible = "amlogic,meson-gxbb-wdt", .data = &gxbb_params, },
 	 { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
@@ -150,6 +157,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_gxbb_wdt *data;
+	struct wdt_params *params;
 	u32 ctrl_reg;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -164,6 +172,8 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
+	params = (struct wdt_params *)of_device_get_match_data(dev);
+
 	platform_set_drvdata(pdev, data);
 
 	data->wdt_dev.parent = dev;
@@ -191,7 +201,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	/* Setup with 1ms timebase */
 	ctrl_reg |= ((clk_get_rate(data->clk) / 1000) &
 			GXBB_WDT_CTRL_DIV_MASK) |
-			GXBB_WDT_CTRL_EE_RESET |
+			BIT(params->rst_shift) |
 			GXBB_WDT_CTRL_CLK_EN |
 			GXBB_WDT_CTRL_CLKDIV_EN;
 
-- 
2.37.1


  parent reply	other threads:[~2023-07-26 11:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-26 11:21 [PATCH 0/4] Add watchdog support for Amlogic-T7 SoCs Huqiang Qin
2023-07-26 11:21 ` [PATCH 1/4] dt-bindings: watchdog: Add " Huqiang Qin
2023-07-26 18:27   ` Conor Dooley
2023-07-26 11:21 ` Huqiang Qin [this message]
2023-07-28  7:15   ` [PATCH 2/4] watchdog: Add a new struct for Amlogic-GXBB driver Dmitry Rokosov
2023-08-01 12:51     ` Huqiang Qin
2023-08-02  7:34       ` Dmitry Rokosov
2023-07-26 11:21 ` [PATCH 3/4] watchdog: Add support for Amlogic-T7 SoCs Huqiang Qin
2023-07-26 11:21 ` [PATCH 4/4] arm64: dts: Add watchdog node " Huqiang Qin
2023-07-28  7:17   ` Dmitry Rokosov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230726112146.1127145-3-huqiang.qin@amlogic.com \
    --to=huqiang.qin@amlogic.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).