[PATCH v2 0/4] Refactoring Microchip PCIe driver and add StarFive PCIe

[Minda Chen <minda.chen@starfivetech.com>]

This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
same IP and have commit their codes, which are mixed with PLDA
controller codes and Microchip platform codes.

For re-use the PLDA controller codes, I request refactoring microchip
codes, move PLDA common codes to PLDA files.
Desigware and Cadence is good example for refactoring codes.

So first step is extract the PLDA common codes from microchip, and
refactoring the microchip codes.(patch1 - 2)
Then, add Starfive codes. (patch3 - 4)

This patchset is base on v6.5-rc1

patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
       docs from microchip,pcie-host.yaml
patch2 is extracting the PLDA common codes from microchip Polarfire PCIe
       codes. The change list in the commit message.
patch3 is add StarFive JH7110 PCIe dt-binding doc.
patch4 is add StarFive JH7110 Soc PCIe codes.

I have noticed that Daire have changed microchip's codes.
https://patchwork.kernel.org/project/linux-pci/cover/20230630154859.2049521-1-daire.mcnamara@microchip.com/
I have changed patch2 base on their commits. StarFive
PCIe driver still can work. But their codes is under reviewed and
maybe changing. Do not base on their changes first.
I will base on their commit to change patch2 as soon as
their commits are accepted.

previous version:
v1:https://patchwork.kernel.org/project/linux-pci/cover/20230719102057.22329-1-minda.chen@starfivetech.com/

change:
  v2:
    patch1:
      - squash dt-bindings patches to patch1
      - add 'required' list. 
      - plda doc rename to plda,xpressrich-axi-common.yaml
    patch2:
      - squash the microchip modification patch to patch 2.
    patch3:
      - remove the plda common required property.
    patch4:
      - Sync the hide rc bar ops with config read function.
      - Revert the T_PVPERL to 100ms and add comments for the source.
      - Replace the link check function by the standard link ops.
      - Convert to new pm ops marcos.
      - Some formats modification.
      - pcie-plda-host modification merge to patch4.
    other:
      - remove the pcie-plda-plat.c
      - remove the starfive dts patch first. for it depends on
        stg clock and syscon setting.

Minda Chen (4):
  dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
  PCI: plda: Get common codes from Microchip PolarFire host
  dt-bindings: PCI: Add StarFive JH7110 PCIe controller
  PCI: starfive: Add JH7110 PCIe controller

 .../bindings/pci/microchip,pcie-host.yaml     |  49 +-
 .../pci/plda,xpressrich3-axi-common.yaml      |  69 ++
 .../bindings/pci/starfive,jh7110-pcie.yaml    | 133 ++++
 MAINTAINERS                                   |  19 +-
 drivers/pci/controller/Kconfig                |   9 +-
 drivers/pci/controller/Makefile               |   2 +-
 drivers/pci/controller/plda/Kconfig           |  31 +
 drivers/pci/controller/plda/Makefile          |   4 +
 .../{ => plda}/pcie-microchip-host.c          | 594 ++--------------
 drivers/pci/controller/plda/pcie-plda-host.c  | 665 ++++++++++++++++++
 drivers/pci/controller/plda/pcie-plda.h       | 242 +++++++
 drivers/pci/controller/plda/pcie-starfive.c   | 438 ++++++++++++
 12 files changed, 1645 insertions(+), 610 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
 create mode 100644 drivers/pci/controller/plda/Kconfig
 create mode 100644 drivers/pci/controller/plda/Makefile
 rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (50%)
 create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
 create mode 100644 drivers/pci/controller/plda/pcie-plda.h
 create mode 100644 drivers/pci/controller/plda/pcie-starfive.c


base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
-- 
2.17.1