From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Andi Shyti" <andi.shyti@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Wolfram Sang" <wsa@kernel.org>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Svyatoslav Ryhel" <clamor95@gmail.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
Date: Sat, 29 Jul 2023 19:08:56 +0300 [thread overview]
Message-ID: <20230729160857.6332-2-clamor95@gmail.com> (raw)
In-Reply-To: <20230729160857.6332-1-clamor95@gmail.com>
Document device tree schema which describes hot-pluggable via GPIO
i2c bus.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/i2c/i2c-hotplug-gpio.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
new file mode 100644
index 000000000000..21f2b74ca6c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-hotplug-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO detected hot-plugged I2C bus
+
+maintainers:
+ - Michał Mirosław <mirq-linux@rere.qmqm.pl>
+
+description:
+ Driver for hot-plugged I2C busses, where some devices on a bus
+ are hot-pluggable and their presence is indicated by GPIO line.
+
+properties:
+ compatible:
+ items:
+ - const: i2c-hotplug-gpio
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts-extended:
+ minItems: 1
+
+ detect-gpios:
+ maxItems: 1
+
+ i2c-parent:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - interrupts-extended
+ - detect-gpios
+ - i2c-parent
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /*
+ * Asus Transformers use I2C hotplug for attachable dock keyboard
+ */
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c-dock {
+ compatible = "i2c-hotplug-gpio";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts-extended = <&gpio 164 IRQ_TYPE_EDGE_BOTH>;
+ detect-gpios = <&gpio 164 GPIO_ACTIVE_LOW>;
+
+ i2c-parent = <&gen2_i2c>;
+ };
+...
--
2.39.2
next prev parent reply other threads:[~2023-07-29 16:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-29 16:08 [PATCH v3 0/2] GPIO-based hotplug i2c bus Svyatoslav Ryhel
2023-07-29 16:08 ` Svyatoslav Ryhel [this message]
2023-08-05 19:23 ` [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio Krzysztof Kozlowski
2023-08-11 17:37 ` Rob Herring
2023-08-12 21:46 ` Michał Mirosław
2023-08-15 20:00 ` Wolfram Sang
2023-07-29 16:08 ` [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate Svyatoslav Ryhel
2023-07-30 20:25 ` Andi Shyti
2023-07-30 22:11 ` Michał Mirosław
2023-07-31 23:01 ` Michał Mirosław
2023-08-04 23:45 ` Andi Shyti
2023-08-10 22:55 ` Michał Mirosław
2023-07-30 20:30 ` Krzysztof Kozlowski
2023-07-30 21:55 ` Michał Mirosław
2023-07-31 6:58 ` Krzysztof Kozlowski
2023-07-31 8:49 ` Michał Mirosław
2023-07-31 12:59 ` Krzysztof Kozlowski
2023-07-31 22:50 ` Michał Mirosław
2023-08-05 19:17 ` Krzysztof Kozlowski
2023-08-10 21:52 ` Michał Mirosław
2023-08-15 5:20 ` Krzysztof Kozlowski
2023-07-30 17:49 ` [PATCH v3 0/2] GPIO-based hotplug i2c bus Andi Shyti
2023-07-30 18:21 ` Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230729160857.6332-2-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
--cc=robh+dt@kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).