devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>, Conor Dooley <conor+dt@kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Sam Ravnborg <sam@ravnborg.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	devicetree@vger.kernel.org
Subject: [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry
Date: Mon, 31 Jul 2023 23:02:58 +0200	[thread overview]
Message-ID: <20230731210258.256152-2-marex@denx.de> (raw)
In-Reply-To: <20230731210258.256152-1-marex@denx.de>

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 396a22177c674..417dd69054fc1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2377,6 +2377,37 @@ static const struct panel_desc innolux_g121x1_l03 = {
 	},
 };
 
+static const struct display_timing innolux_g156hce_l01_timings = {
+	.pixelclock = { 120000000, 144000000, 150000000 },
+	.hactive = { 1920, 1920, 1920 },
+	.hfront_porch = { 80, 90, 100 },
+	.hback_porch = { 80, 90, 100 },
+	.hsync_len = { 20, 30, 30 },
+	.vactive = { 1080, 1080, 1080 },
+	.vfront_porch = { 3, 10, 20 },
+	.vback_porch = { 3, 10, 20 },
+	.vsync_len = { 4, 10, 10 },
+};
+
+static const struct panel_desc innolux_g156hce_l01 = {
+	.timings = &innolux_g156hce_l01_timings,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 344,
+		.height = 194,
+	},
+	.delay = {
+		.prepare = 1,		/* T1+T2 */
+		.enable = 450,		/* T5 */
+		.disable = 200,		/* T6 */
+		.unprepare = 10,	/* T3+T7 */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode innolux_n156bge_l21_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -4243,6 +4274,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,g121x1-l03",
 		.data = &innolux_g121x1_l03,
+	}, {
+		.compatible = "innolux,g156hce-l01",
+		.data = &innolux_g156hce_l01,
 	}, {
 		.compatible = "innolux,n156bge-l21",
 		.data = &innolux_n156bge_l21,
-- 
2.40.1


  reply	other threads:[~2023-07-31 21:03 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-31 21:02 [PATCH 1/2] dt-bindings: display: simple: Add Innolux G156HCE-L01 panel Marek Vasut
2023-07-31 21:02 ` Marek Vasut [this message]
2023-08-03  8:24   ` [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry Neil Armstrong
2023-08-03 14:23   ` Luca Ceresoli
2023-08-03 14:25     ` Marek Vasut
2023-08-03 15:06       ` Luca Ceresoli
2023-08-03 17:10         ` Marek Vasut
2023-08-04  8:19           ` Luca Ceresoli
2023-08-04 14:30             ` Luca Ceresoli
2023-08-01 15:42 ` [PATCH 1/2] dt-bindings: display: simple: Add Innolux G156HCE-L01 panel Conor Dooley
2023-08-03  8:27 ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230731210258.256152-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).