From: Nishanth Menon <nm@ti.com>
To: Judith Mendez <jm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-am62a7: Add MCU MCAN nodes
Date: Wed, 2 Aug 2023 00:14:02 -0500 [thread overview]
Message-ID: <20230802051402.totwmtw2oadqrai7@herself> (raw)
In-Reply-To: <20230724183844.635319-1-jm@ti.com>
On 13:38-20230724, Judith Mendez wrote:
> On AM62ax there are no hardware interrupts routed to A53 GIC
> interrupt controller for MCU MCAN IPs, so MCU MCAN nodes were
> omitted from MCU dtsi.
>
> Timer polling was introduced in commits [1][2] enabling 3x MCAN
> on AM62ax, so now add MCU MCAN nodes to the mcu dtsi for the Cortex A53.
>
> [1] commit b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
> [2] commit bb410c03b999 ("dt-bindings: net: can: Remove interrupt properties for MCAN")
>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
> index 04599762c2b7..3fca702e7f2d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
> @@ -143,4 +143,28 @@ mcu_rti0: watchdog@4880000 {
> /* Tightly coupled to M4F */
> status = "reserved";
> };
> +
> + mcu_mcan0: can@4e00000 {
s/4e00000/4e08000
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e08000 0x00 0x200>,
> + <0x00 0x4e00000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> +
> + mcu_mcan1: can@4e10000 {
s/4e10000/4e18000
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e18000 0x00 0x200>,
> + <0x00 0x4e10000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> };
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
prev parent reply other threads:[~2023-08-02 5:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 18:38 [PATCH] arm64: dts: ti: k3-am62a7: Add MCU MCAN nodes Judith Mendez
2023-08-02 5:14 ` Nishanth Menon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230802051402.totwmtw2oadqrai7@herself \
--to=nm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jm@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).