From: Chen-Yu Tsai <wenst@chromium.org>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Mark Brown <broonie@kernel.org>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
Zhiyong Tao <zhiyong.tao@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH 8/9] regulator: mt6358: Add supply names for MT6366 regulators
Date: Thu, 3 Aug 2023 15:42:46 +0800 [thread overview]
Message-ID: <20230803074249.3065586-9-wenst@chromium.org> (raw)
In-Reply-To: <20230803074249.3065586-1-wenst@chromium.org>
The DT bindings for MT6366 regulator defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply whose name
can be derived from the regulator name. The LDOs have shared supplies.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/regulator/mt6358-regulator.c | 73 ++++++++++++++--------------
1 file changed, 36 insertions(+), 37 deletions(-)
diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index c9fd5904d13f..b3de933c58b3 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -139,6 +139,7 @@ struct mt6358_regulator_info {
[MT6366_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
+ .supply_name = "vsys_" match, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -161,10 +162,11 @@ struct mt6358_regulator_info {
.modeset_mask = BIT(_modeset_shift), \
}
-#define MT6366_LDO(match, vreg, volt_ranges, enreg, enbit, vosel, vosel_mask) \
+#define MT6366_LDO(match, vreg, volt_ranges, supply, enreg, enbit, vosel, vosel_mask) \
[MT6366_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
+ .supply_name = supply, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_table_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -185,12 +187,13 @@ struct mt6358_regulator_info {
.qi = BIT(15), \
}
-#define MT6366_LDO1(match, vreg, min, max, step, \
+#define MT6366_LDO1(match, vreg, supply, min, max, step, \
_da_vsel_reg, _da_vsel_mask, \
vosel, vosel_mask) \
[MT6366_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
+ .supply_name = supply, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -210,11 +213,12 @@ struct mt6358_regulator_info {
.qi = BIT(0), \
}
-#define MT6366_REG_FIXED(match, vreg, \
+#define MT6366_REG_FIXED(match, vreg, supply, \
enreg, enbit, volt) \
[MT6366_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
+ .supply_name = supply, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -589,57 +593,52 @@ static const struct mt6358_regulator_info mt6366_regulators[] = {
0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f, MT6358_VMODEM_ANA_CON0, 8),
MT6366_BUCK("vs1", VS1, 1000000, 2587500, 12500,
0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, MT6358_VS1_ANA_CON0, 8),
- MT6366_REG_FIXED("vrf12", VRF12,
- MT6358_LDO_VRF12_CON0, 0, 1200000),
- MT6366_REG_FIXED("vio18", VIO18,
- MT6358_LDO_VIO18_CON0, 0, 1800000),
- MT6366_REG_FIXED("vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
- MT6366_REG_FIXED("vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
- MT6366_REG_FIXED("vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
- MT6366_REG_FIXED("vaux18", VAUX18,
- MT6358_LDO_VAUX18_CON0, 0, 1800000),
- MT6366_REG_FIXED("vbif28", VBIF28,
- MT6358_LDO_VBIF28_CON0, 0, 2800000),
- MT6366_REG_FIXED("vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
- MT6366_REG_FIXED("va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
- MT6366_REG_FIXED("vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
- MT6366_REG_FIXED("vaud28", VAUD28,
- MT6358_LDO_VAUD28_CON0, 0, 2800000),
- MT6366_LDO("vdram2", VDRAM2, vdram2,
+ MT6366_REG_FIXED("vrf12", VRF12, "vs2_ldo2", MT6358_LDO_VRF12_CON0, 0, 1200000),
+ MT6366_REG_FIXED("vio18", VIO18, "vs1_ldo1", MT6358_LDO_VIO18_CON0, 0, 1800000),
+ MT6366_REG_FIXED("vfe28", VFE28, "vsys_ldo1", MT6358_LDO_VFE28_CON0, 0, 2800000),
+ MT6366_REG_FIXED("vcn28", VCN28, "vsys_ldo1", MT6358_LDO_VCN28_CON0, 0, 2800000),
+ MT6366_REG_FIXED("vxo22", VXO22, "vsys_ldo1", MT6358_LDO_VXO22_CON0, 0, 2200000),
+ MT6366_REG_FIXED("vaux18", VAUX18, "vsys_ldo1", MT6358_LDO_VAUX18_CON0, 0, 1800000),
+ MT6366_REG_FIXED("vbif28", VBIF28, "vsys_ldo1", MT6358_LDO_VBIF28_CON0, 0, 2800000),
+ MT6366_REG_FIXED("vio28", VIO28, "vsys_ldo2", MT6358_LDO_VIO28_CON0, 0, 2800000),
+ MT6366_REG_FIXED("va12", VA12, "vs2_ldo2", MT6358_LDO_VA12_CON0, 0, 1200000),
+ MT6366_REG_FIXED("vrf18", VRF18, "vs1_ldo1", MT6358_LDO_VRF18_CON0, 0, 1800000),
+ MT6366_REG_FIXED("vaud28", VAUD28, "vsys_ldo1", MT6358_LDO_VAUD28_CON0, 0, 2800000),
+ MT6366_LDO("vdram2", VDRAM2, vdram2, "vs2_ldo1",
MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10),
- MT6366_LDO("vsim1", VSIM1, vsim,
+ MT6366_LDO("vsim1", VSIM1, vsim, "vsys_ldo1",
MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00),
- MT6366_LDO("vibr", VIBR, vibr,
+ MT6366_LDO("vibr", VIBR, vibr, "vsys_ldo3",
MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00),
- MT6366_LDO("vusb", VUSB, vusb,
+ MT6366_LDO("vusb", VUSB, vusb, "vsys_ldo1",
MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700),
- MT6366_LDO("vefuse", VEFUSE, vefuse,
+ MT6366_LDO("vefuse", VEFUSE, vefuse, "vs1_ldo1",
MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00),
- MT6366_LDO("vmch", VMCH, vmch_vemc,
+ MT6366_LDO("vmch", VMCH, vmch_vemc, "vsys_ldo2",
MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700),
- MT6366_LDO("vemc", VEMC, vmch_vemc,
+ MT6366_LDO("vemc", VEMC, vmch_vemc, "vsys_ldo3",
MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700),
- MT6366_LDO("vcn33", VCN33, vcn33,
+ MT6366_LDO("vcn33", VCN33, vcn33, "vsys_ldo3",
MT6358_LDO_VCN33_CON0_0, 0, MT6358_VCN33_ANA_CON0, 0x300),
- MT6366_LDO("vmc", VMC, vmc,
+ MT6366_LDO("vmc", VMC, vmc, "vsys_ldo2",
MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00),
- MT6366_LDO("vsim2", VSIM2, vsim,
+ MT6366_LDO("vsim2", VSIM2, vsim, "vsys_ldo2",
MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00),
- MT6366_LDO("vcn18", VCN18, mt6366_vcn18_vm18,
+ MT6366_LDO("vcn18", VCN18, mt6366_vcn18_vm18, "vs1_ldo1",
MT6358_LDO_VCN18_CON0, 0, MT6358_VCN18_ANA_CON0, 0xf00),
- MT6366_LDO("vm18", VM18, mt6366_vcn18_vm18,
+ MT6366_LDO("vm18", VM18, mt6366_vcn18_vm18, "vs1_ldo1",
MT6358_LDO_VM18_CON0, 0, MT6358_VM18_ANA_CON0, 0xf00),
- MT6366_LDO("vmddr", VMDDR, mt6366_vmddr,
+ MT6366_LDO("vmddr", VMDDR, mt6366_vmddr, "vs2_ldo1",
MT6358_LDO_VMDDR_CON0, 0, MT6358_VMDDR_ANA_CON0, 0xf00),
- MT6366_LDO1("vsram-proc11", VSRAM_PROC11, 500000, 1293750, 6250,
+ MT6366_LDO1("vsram-proc11", VSRAM_PROC11, "vs2_ldo3", 500000, 1293750, 6250,
MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f00, MT6358_LDO_VSRAM_CON0, 0x7f),
- MT6366_LDO1("vsram-others", VSRAM_OTHERS, 500000, 1293750, 6250,
+ MT6366_LDO1("vsram-others", VSRAM_OTHERS, "vs2_ldo3", 500000, 1293750, 6250,
MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f00, MT6358_LDO_VSRAM_CON2, 0x7f),
- MT6366_LDO1("vsram-gpu", VSRAM_GPU, 500000, 1293750, 6250,
+ MT6366_LDO1("vsram-gpu", VSRAM_GPU, "vs2_ldo3", 500000, 1293750, 6250,
MT6358_LDO_VSRAM_GPU_DBG0, 0x7f00, MT6358_LDO_VSRAM_CON3, 0x7f),
- MT6366_LDO1("vsram-proc12", VSRAM_PROC12, 500000, 1293750, 6250,
+ MT6366_LDO1("vsram-proc12", VSRAM_PROC12, "vs2_ldo3", 500000, 1293750, 6250,
MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f00, MT6358_LDO_VSRAM_CON1, 0x7f),
- MT6366_LDO1("vsram-core", VSRAM_CORE, 500000, 1293750, 6250,
+ MT6366_LDO1("vsram-core", VSRAM_CORE, "vs2_ldo3", 500000, 1293750, 6250,
MT6358_LDO_VSRAM_CORE_DBG0, 0x7f00, MT6358_LDO_VSRAM_CON5, 0x7f),
};
--
2.41.0.585.gd2178a4bd4-goog
next prev parent reply other threads:[~2023-08-03 7:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 7:42 [PATCH 0/9] regulator: mt6366: Split out of MT6358 and cleanup Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 1/9] dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC Chen-Yu Tsai
2023-08-04 15:31 ` Conor Dooley
2023-08-03 7:42 ` [PATCH 2/9] mfd: mt6358: Add registers for MT6366 specific regulators Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 3/9] mfd: mt6397: Split MediaTek MT6366 PMIC out of MT6358 Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 3:47 ` Chen-Yu Tsai
2023-08-04 6:39 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 4/9] regulator: dt-bindings: mediatek: Add MT6366 PMIC Chen-Yu Tsai
2023-08-07 6:23 ` Krzysztof Kozlowski
2023-08-07 6:30 ` Chen-Yu Tsai
2023-08-07 6:36 ` Krzysztof Kozlowski
2023-08-03 7:42 ` [PATCH 5/9] regulator: mt6358: fix and drop type prefix in MT6366 regulator node names Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 10:13 ` Eugen Hristev
2023-08-07 3:54 ` Chen-Yu Tsai
2023-08-03 7:42 ` [PATCH 6/9] regulator: mt6358: Make MT6366 vcn18 LDO configurable Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 7/9] regulator: mt6358: Add missing regulators for MT6366 Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-03 7:42 ` Chen-Yu Tsai [this message]
2023-08-03 9:01 ` [PATCH 8/9] regulator: mt6358: Add supply names for MT6366 regulators AngeloGioacchino Del Regno
2023-08-03 7:42 ` [PATCH 9/9] soc: mediatek: pwrap: add support for MT6366 PMIC Chen-Yu Tsai
2023-08-03 9:01 ` AngeloGioacchino Del Regno
2023-08-04 3:49 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230803074249.3065586-9-wenst@chromium.org \
--to=wenst@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).