[PATCH v3 1/4] dt-bindings: vendor-prefixes: Add BigTreeTech

[PATCH v3 1/4] dt-bindings: vendor-prefixes: Add BigTreeTech

[Martin Botka]

From: Martin Botka <martin.botka@somainline.org>

BigTreeTech is a company based in Shenzhen that makes
3D printers and accessories.

Add prefix for it.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in V2:
    - Fix alphabetical order
Changes in V3: none

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index af60bf1a6664..a1f3bb7be860 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -192,6 +192,8 @@ patternProperties:
     description: BeagleBoard.org Foundation
   "^bhf,.*":
     description: Beckhoff Automation GmbH & Co. KG
+  "^bigtreetech,.*":
+    description: Shenzhen BigTree Tech Co., LTD
   "^bitmain,.*":
     description: Bitmain Technologies
   "^blutek,.*":
-- 
2.41.0

[PATCH v3 2/4] dt-bindings: arm: sunxi: Add BigTreeTech boards

[Martin Botka]

From: Martin Botka <martin.botka@somainline.org>

Add name & compatible for BigTreeTech Manta boards and
BigTreeTech Pi

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in V2:
    - Remove CB1 SoM as its own entry
    - Squash BTT Pi and manta patches into 1
Changes in V3: none

 Documentation/devicetree/bindings/arm/sunxi.yaml | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index ee8fdd2da869..b90d2a7dbe2d 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -151,6 +151,17 @@ properties:
           - const: roofull,beelink-x2
           - const: allwinner,sun8i-h3
 
+      - description: BigTreeTech Manta M4/8P
+        items:
+          - const: bigtreetech,cb1-manta
+          - const: bigtreetech,cb1
+          - const: allwinner,sun50i-h616
+
+      - description: BigTreeTech Pi
+        items:
+          - const: bigtreetech,pi
+          - const: allwinner,sun50i-h616
+
       - description: Chuwi V7 CW0825
         items:
           - const: chuwi,v7-cw0825
-- 
2.41.0

[PATCH v3 3/4] arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support

[Martin Botka]

From: Martin Botka <martin.botka@somainline.org>

CB1 is Compute Module style board that plugs into Rpi board style adapter or
Manta 3D printer boards (M4P/M8P).

The SoM features:
  - H616 SoC
  - 1GiB of RAM
  - AXP313A PMIC
  - RTL8189FTV WiFi

Boards feature:
  - 4x USB via USB2 hub (usb1 on SoM).
  - SDcard slot for loading images.
  - Ethernet port wired to the internal PHY. (100M)
  - 2x HDMI 2.0. (Only 1 usable on CB1)
  - Power and Status LEDs. (Only Status LED usable on CB1)
  - 40 pin GPIO header

Currently working:
  - Booting
  - USB
  - UART
  - MMC
  - Status LED
  - WiFi (RTL8189FS via out of tree driver)

I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter.
CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
---
Changes in V2:
    - Fixed whitespace errors
    - Move UART into carrier boards and BTT Pi
    - Remove usb1-vbus regulator
    - Fix ranges and naming of AXP313A rails
    - Add comment specifying why broken-cd in mmc0 is needed
    - Rename sdio_wifi to wifi
    - Specify in commit description that USB-OTG doesnt work
Changes in V3:
    - Add missed semicolons
    - Move model string from dtsi to board dts
    - Add cb1 compatible
    - Remove extra empty line

 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../sun50i-h616-bigtreetech-cb1-manta.dts     |  35 +++++
 .../sun50i-h616-bigtreetech-cb1.dtsi          | 140 ++++++++++++++++++
 3 files changed, 176 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6a96494a2e0a..7b386428510b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
new file mode 100644
index 000000000000..dbce61b355d6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech CB1";
+	compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
new file mode 100644
index 000000000000..5f606fcce97c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from carrier boards */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	/* Card detection pin is not connected */
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	mmc-ddr-1_8v;
+	status = "okay";
+
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313a: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators{
+			reg_dcdc1: dcdc1 {
+				regulator-name = "vdd-gpu-sys";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-always-on;
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-name = "vdd-cpu";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-name = "vcc-dram";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-name = "vcc-1v8-pll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-name = "vcc-3v3-io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
-- 
2.41.0

[PATCH v3 4/4] arm64: dts: allwinner: h616: Add BigTreeTech Pi support

[Martin Botka]

The BigTreeTech Pi is an H616 based board based on CB1.
Just in Rpi format board.

It features the same internals as BTT CB1 but adds:
    - Fan port
    - IR receiver
    - ADXL345 Accelerometer connector via SPI
    - 24V DC power supply via terminal plugs
    - USB to CAN module connector (The actual USB to CAN happens on the external module)

List of currently working things is same as BTT CB1 but also:
    - IR receiver
    - ADXL345 connector

Signed-off-by: Martin Botka <martin@biqu3d.com>
---
Changes in V2:
    - Add UART alongside aliases and chosen for it
    - Add model string
    - Enable IR receiver
    - Enable SPI0 for ADXL345 connector
Changes in V3:
    - Add missing semicolons
    - Add pinctrl for SPI0

 arch/arm64/boot/dts/allwinner/Makefile        |  1 +
 .../allwinner/sun50i-h616-bigtreetech-pi.dts  | 70 +++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 7b386428510b..0b6232a7f328 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -39,5 +39,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
new file mode 100644
index 000000000000..b0d0386e8f13
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech Pi";
+	compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&spi0 {
+	/* SPI connection for onboard connector for ADXL345 accelerometer */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
-- 
2.41.0

Re: [PATCH v3 3/4] arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support

[Andre Przywara]

On Sat,  5 Aug 2023 10:36:06 +0200
Martin Botka <martin@biqu3d.com> wrote:

Hi,

> From: Martin Botka <martin.botka@somainline.org>
> 
> CB1 is Compute Module style board that plugs into Rpi board style adapter or
> Manta 3D printer boards (M4P/M8P).
> 
> The SoM features:
>   - H616 SoC
>   - 1GiB of RAM
>   - AXP313A PMIC
>   - RTL8189FTV WiFi
> 
> Boards feature:
>   - 4x USB via USB2 hub (usb1 on SoM).
>   - SDcard slot for loading images.
>   - Ethernet port wired to the internal PHY. (100M)
>   - 2x HDMI 2.0. (Only 1 usable on CB1)
>   - Power and Status LEDs. (Only Status LED usable on CB1)
>   - 40 pin GPIO header
> 
> Currently working:
>   - Booting
>   - USB
>   - UART
>   - MMC
>   - Status LED
>   - WiFi (RTL8189FS via out of tree driver)
> 
> I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter.
> CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM.
> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>

Thanks, looks good now, git am, dtc, checkpatch and dt-validate all
pass (given the "interrupt optional" binding patch):

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
> Changes in V2:
>     - Fixed whitespace errors
>     - Move UART into carrier boards and BTT Pi
>     - Remove usb1-vbus regulator
>     - Fix ranges and naming of AXP313A rails
>     - Add comment specifying why broken-cd in mmc0 is needed
>     - Rename sdio_wifi to wifi
>     - Specify in commit description that USB-OTG doesnt work
> Changes in V3:
>     - Add missed semicolons
>     - Move model string from dtsi to board dts
>     - Add cb1 compatible
>     - Remove extra empty line
> 
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../sun50i-h616-bigtreetech-cb1-manta.dts     |  35 +++++
>  .../sun50i-h616-bigtreetech-cb1.dtsi          | 140 ++++++++++++++++++
>  3 files changed, 176 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 6a96494a2e0a..7b386428510b 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
> new file mode 100644
> index 000000000000..dbce61b355d6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616-bigtreetech-cb1.dtsi"
> +
> +/ {
> +	model = "BigTreeTech CB1";
> +	compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
> new file mode 100644
> index 000000000000..5f606fcce97c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> +	aliases {
> +		ethernet0 = &rtl8189ftv;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led-0 {
> +			function = LED_FUNCTION_STATUS;
> +			color = <LED_COLOR_ID_GREEN>;
> +			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> +		};
> +	};
> +
> +	reg_vcc5v: regulator-vcc5v {
> +		/* board wide 5V supply from carrier boards */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-5v";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_vcc33_wifi: vcc33-wifi {
> +		/* Always on 3.3V regulator for WiFi */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc33-wifi";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		vin-supply = <&reg_vcc5v>;
> +	};
> +
> +	reg_vcc_wifi_io: vcc-wifi-io {
> +		/* Always on 1.8V/300mA regulator for WiFi */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-wifi-io";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +		vin-supply = <&reg_vcc33_wifi>;
> +	};
> +
> +	wifi_pwrseq: wifi-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&rtc 1>;
> +		clock-names = "ext_clock";
> +		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
> +		post-power-on-delay-ms = <200>;
> +	};
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_dldo1>;
> +	/* Card detection pin is not connected */
> +	broken-cd;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc1 {
> +	vmmc-supply = <&reg_vcc33_wifi>;
> +	vqmmc-supply = <&reg_vcc_wifi_io>;
> +	mmc-pwrseq = <&wifi_pwrseq>;
> +	bus-width = <4>;
> +	non-removable;
> +	mmc-ddr-1_8v;
> +	status = "okay";
> +
> +	rtl8189ftv: wifi@1 {
> +		reg = <1>;
> +	};
> +};
> +
> +&r_i2c {
> +	status = "okay";
> +
> +	axp313a: pmic@36 {
> +		compatible = "x-powers,axp313a";
> +		reg = <0x36>;
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		regulators{
> +			reg_dcdc1: dcdc1 {
> +				regulator-name = "vdd-gpu-sys";
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <990000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_dcdc2: dcdc2 {
> +				regulator-name = "vdd-cpu";
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-ramp-delay = <200>;
> +				regulator-always-on;
> +			};
> +
> +			reg_dcdc3: dcdc3 {
> +				regulator-name = "vcc-dram";
> +				regulator-min-microvolt = <1350000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_aldo1: aldo1 {
> +				regulator-name = "vcc-1v8-pll";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_dldo1: dldo1 {
> +				regulator-name = "vcc-3v3-io";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&usbphy {
> +	status = "okay";
> +};

Re: [PATCH v3 4/4] arm64: dts: allwinner: h616: Add BigTreeTech Pi support

[Andre Przywara]

On Sat,  5 Aug 2023 10:36:07 +0200
Martin Botka <martin@biqu3d.com> wrote:

Hi,

> The BigTreeTech Pi is an H616 based board based on CB1.
> Just in Rpi format board.
> 
> It features the same internals as BTT CB1 but adds:
>     - Fan port
>     - IR receiver
>     - ADXL345 Accelerometer connector via SPI
>     - 24V DC power supply via terminal plugs
>     - USB to CAN module connector (The actual USB to CAN happens on the external module)
> 
> List of currently working things is same as BTT CB1 but also:
>     - IR receiver
>     - ADXL345 connector
> 
> Signed-off-by: Martin Botka <martin@biqu3d.com>

Thanks, looks good now, all tests pass:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
> Changes in V2:
>     - Add UART alongside aliases and chosen for it
>     - Add model string
>     - Enable IR receiver
>     - Enable SPI0 for ADXL345 connector
> Changes in V3:
>     - Add missing semicolons
>     - Add pinctrl for SPI0
> 
>  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
>  .../allwinner/sun50i-h616-bigtreetech-pi.dts  | 70 +++++++++++++++++++
>  2 files changed, 71 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 7b386428510b..0b6232a7f328 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -39,5 +39,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
> new file mode 100644
> index 000000000000..b0d0386e8f13
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616-bigtreetech-cb1.dtsi"
> +
> +/ {
> +	model = "BigTreeTech Pi";
> +	compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&ehci2 {
> +	status = "okay";
> +};
> +
> +&ehci3 {
> +	status = "okay";
> +};
> +
> +&ir {
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&ohci2 {
> +	status = "okay";
> +};
> +
> +&ohci3 {
> +	status = "okay";
> +};
> +
> +&spi0 {
> +	/* SPI connection for onboard connector for ADXL345 accelerometer */
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};