From: Andrew Davis <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Udit Kumar <u-kumar1@ti.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Andrew Davis <afd@ti.com>
Subject: [PATCH 1/3] arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
Date: Wed, 9 Aug 2023 13:01:43 -0500 [thread overview]
Message-ID: <20230809180145.53158-1-afd@ti.com> (raw)
C7x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 1 +
4 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 66aac145e7530..d1235e7c786d6 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -1024,6 +1024,7 @@ &c66_1 {
};
&c71_0 {
+ status = "okay";
mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 3acd55ffd4ffc..1aeb97b42b34b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -2134,6 +2134,7 @@ c71_0: dsp@64800000 {
ti,sci-proc-ids = <0x30 0xff>;
resets = <&k3_reset 15 1>;
firmware-name = "j7-c71_0-fw";
+ status = "disabled";
};
icssg0: icssg@b000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 0ee4f38ec8f03..377588ba30998 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -1110,6 +1110,7 @@ &c66_1 {
};
&c71_0 {
+ status = "okay";
mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index e90e43202546e..3c31ab57e959c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -436,6 +436,7 @@ &c66_1 {
};
&c71_0 {
+ status = "okay";
mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
--
2.39.2
next reply other threads:[~2023-08-09 18:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-09 18:01 Andrew Davis [this message]
2023-08-09 18:01 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level Andrew Davis
2023-08-09 18:01 ` [PATCH 3/3] arm64: dts: ti: k3-j721e: Enable C6x " Andrew Davis
2023-08-10 8:50 ` [PATCH 1/3] arm64: dts: ti: k3-j721e: Enable C7x " Kumar, Udit
2023-08-10 22:26 ` Hari Nagalla
2023-08-10 23:02 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230809180145.53158-1-afd@ti.com \
--to=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).