From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Dhruva Gole <d-gole@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>
Subject: [PATCH v3 00/13] Another round of K3 DTSI disables
Date: Wed, 9 Aug 2023 19:38:01 -0500 [thread overview]
Message-ID: <20230810003814.85450-1-afd@ti.com> (raw)
Hello all,
Similar to a couple previous series on this, we disable by default
nodes that cannot function standalone.
This helps prevent folks from forgetting to disable unused nodes
in their boards. One benefit of that is you can start out with
an almost empty DTS file for a new board and have it still
function without warnings or misbehaving hardware. Adding as you
go, this helps ease bringup and upstreaming of new boards.
Thanks,
Andrew
Changes for v3:
- Add enables for tqma64xxl (AM64 based)
Changes for v2:
- Added Reviewed-bys (thanks Dhruva)
- Removed "default pins" comments for GPIO
- Reworded message for 12/13 to make it more clear on dtsi files
Andrew Davis (13):
arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level
arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level
arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level
arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level
arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level
arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level
arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level
arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level
arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 +
.../boot/dts/ti/k3-am64-phycore-som.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 1 +
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 5 +-
.../dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 +
.../arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi | 1 +
.../boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 3 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 24 +-------
.../dts/ti/k3-j7200-common-proc-board.dts | 19 ++----
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 3 +
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 1 +
.../boot/dts/ti/k3-j721e-beagleboneai64.dts | 60 ++++---------------
.../dts/ti/k3-j721e-common-proc-board.dts | 42 ++++---------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 11 ++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 6 ++
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 57 ++----------------
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 1 +
.../dts/ti/k3-j721s2-common-proc-board.dts | 18 ++----
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 ++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +
23 files changed, 93 insertions(+), 187 deletions(-)
--
2.39.2
next reply other threads:[~2023-08-10 0:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 0:38 Andrew Davis [this message]
2023-08-10 0:38 ` [PATCH v3 01/13] arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level Andrew Davis
2023-08-10 0:38 ` [PATCH v3 02/13] arm64: dts: ti: k3-j7200: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 03/13] arm64: dts: ti: k3-j721s2: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 04/13] arm64: dts: ti: k3-am65: Enable OSPI " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 05/13] arm64: dts: ti: k3-j721e: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 06/13] arm64: dts: ti: k3-j7200: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 07/13] arm64: dts: ti: k3-am64: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 08/13] arm64: dts: ti: k3-j721e: Enable GPIO " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 09/13] arm64: dts: ti: k3-j721s2: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 10/13] arm64: dts: ti: k3-j7200: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 11/13] arm64: dts: ti: k3-j721e: Enable TSCADC " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 12/13] arm64: dts: ti: k3-am65: " Andrew Davis
2023-08-10 0:38 ` [PATCH v3 13/13] arm64: dts: ti: k3-am64: " Andrew Davis
2023-08-10 5:22 ` [PATCH v3 00/13] Another round of K3 DTSI disables Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230810003814.85450-1-afd@ti.com \
--to=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=d-gole@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).