From: Hari Nagalla <hnagalla@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH] arm64: dts: ti: k3-j784s4-main: disable remote proc nodes
Date: Wed, 9 Aug 2023 19:56:29 -0500 [thread overview]
Message-ID: <20230810005629.21738-1-hnagalla@ti.com> (raw)
Disable the dsp and r5f subsystem nodes by default. Proper functioning
of remote processors with ipc need mailbox configurations which can
vary between board configurations and applications. Hence move enabling
the remote processor device nodes to where the required configurations
are complete.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
This patch fixes the remote proc yamllint errors for am69-sk board
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index a04c44708a09..e7b54338b220 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1402,6 +1402,7 @@ main_r5fss0: r5fss@5c00000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@5c00000 {
compatible = "ti,j721s2-r5f";
@@ -1442,6 +1443,7 @@ main_r5fss1: r5fss@5e00000 {
ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
<0x5f00000 0x00 0x5f00000 0x20000>;
power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@5e00000 {
compatible = "ti,j721s2-r5f";
@@ -1482,6 +1484,7 @@ main_r5fss2: r5fss@5900000 {
ranges = <0x5900000 0x00 0x5900000 0x20000>,
<0x5a00000 0x00 0x5a00000 0x20000>;
power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss2_core0: r5f@5900000 {
compatible = "ti,j721s2-r5f";
@@ -1524,6 +1527,7 @@ c71_0: dsp@64800000 {
ti,sci-proc-ids = <0x30 0xff>;
resets = <&k3_reset 30 1>;
firmware-name = "j784s4-c71_0-fw";
+ status = "disabled";
};
c71_1: dsp@65800000 {
@@ -1536,6 +1540,7 @@ c71_1: dsp@65800000 {
ti,sci-proc-ids = <0x31 0xff>;
resets = <&k3_reset 33 1>;
firmware-name = "j784s4-c71_1-fw";
+ status = "disabled";
};
c71_2: dsp@66800000 {
@@ -1548,6 +1553,7 @@ c71_2: dsp@66800000 {
ti,sci-proc-ids = <0x32 0xff>;
resets = <&k3_reset 37 1>;
firmware-name = "j784s4-c71_2-fw";
+ status = "disabled";
};
c71_3: dsp@67800000 {
@@ -1560,5 +1566,6 @@ c71_3: dsp@67800000 {
ti,sci-proc-ids = <0x33 0xff>;
resets = <&k3_reset 40 1>;
firmware-name = "j784s4-c71_3-fw";
+ status = "disabled";
};
};
--
2.34.1
next reply other threads:[~2023-08-10 0:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 0:56 Hari Nagalla [this message]
2023-08-10 1:10 ` [PATCH] arm64: dts: ti: k3-j784s4-main: disable remote proc nodes Nishanth Menon
2023-08-10 15:38 ` Hari Nagalla
2023-08-10 18:38 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230810005629.21738-1-hnagalla@ti.com \
--to=hnagalla@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox