From: Minda Chen <minda.chen@starfivetech.com>
To: "Daire McNamara" <daire.mcnamara@microchip.com>,
"Conor Dooley" <conor@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-pci@vger.kernel.org,
"Pali Rohár" <pali@kernel.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Mason Huo" <mason.huo@starfivetech.com>,
"Leyfoon Tan" <leyfoon.tan@starfivetech.com>,
"Kevin Xie" <kevin.xie@starfivetech.com>,
"Minda Chen" <minda.chen@starfivetech.com>
Subject: [PATCH v3 03/11] PCI: microchip: Move PLDA IP register macros to pcie-plda.h
Date: Mon, 14 Aug 2023 16:20:08 +0800 [thread overview]
Message-ID: <20230814082016.104181-4-minda.chen@starfivetech.com> (raw)
In-Reply-To: <20230814082016.104181-1-minda.chen@starfivetech.com>
Move PLDA PCIe host controller IP registers macros to
pcie-plda.h, Including bridge and configuration space
registers.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
MAINTAINERS | 8 ++
.../pci/controller/plda/pcie-microchip-host.c | 82 +----------------
drivers/pci/controller/plda/pcie-plda.h | 90 +++++++++++++++++++
3 files changed, 99 insertions(+), 81 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d604643a033b..f46b0cfc8ef9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16278,6 +16278,14 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
F: drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
+PCI DRIVER FOR PLDA PCIE IP
+M: Daire McNamara <daire.mcnamara@microchip.com>
+M: Kevin Xie <kevin.xie@starfivetech.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/plda,*
+F: drivers/pci/controller/plda/*plda*
+
PCI DRIVER FOR RENESAS R-CAR
M: Marek Vasut <marek.vasut+renesas@gmail.com>
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index a953ba1c9b0f..5ab11741f406 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include "../../pci.h"
+#include "pcie-plda.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
@@ -30,84 +31,6 @@
#define MC_PCIE_BRIDGE_ADDR (MC_PCIE1_BRIDGE_ADDR)
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
-/* PCIe Bridge Phy Regs */
-#define PCIE_PCI_IRQ_DW0 0xa8
-#define MSIX_CAP_MASK BIT(31)
-#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
-#define NUM_MSI_MSGS_SHIFT 4
-
-#define IMASK_LOCAL 0x180
-#define DMA_END_ENGINE_0_MASK 0x00000000u
-#define DMA_END_ENGINE_0_SHIFT 0
-#define DMA_END_ENGINE_1_MASK 0x00000000u
-#define DMA_END_ENGINE_1_SHIFT 1
-#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
-#define DMA_ERROR_ENGINE_0_SHIFT 8
-#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
-#define DMA_ERROR_ENGINE_1_SHIFT 9
-#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
-#define A_ATR_EVT_POST_ERR_SHIFT 16
-#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
-#define A_ATR_EVT_FETCH_ERR_SHIFT 17
-#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
-#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
-#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define A_ATR_EVT_DOORBELL_SHIFT 19
-#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
-#define P_ATR_EVT_POST_ERR_SHIFT 20
-#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
-#define P_ATR_EVT_FETCH_ERR_SHIFT 21
-#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
-#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
-#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define P_ATR_EVT_DOORBELL_SHIFT 23
-#define PM_MSI_INT_INTA_MASK 0x01000000u
-#define PM_MSI_INT_INTA_SHIFT 24
-#define PM_MSI_INT_INTB_MASK 0x02000000u
-#define PM_MSI_INT_INTB_SHIFT 25
-#define PM_MSI_INT_INTC_MASK 0x04000000u
-#define PM_MSI_INT_INTC_SHIFT 26
-#define PM_MSI_INT_INTD_MASK 0x08000000u
-#define PM_MSI_INT_INTD_SHIFT 27
-#define PM_MSI_INT_INTX_MASK 0x0f000000u
-#define PM_MSI_INT_INTX_SHIFT 24
-#define PM_MSI_INT_MSI_MASK 0x10000000u
-#define PM_MSI_INT_MSI_SHIFT 28
-#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
-#define PM_MSI_INT_AER_EVT_SHIFT 29
-#define PM_MSI_INT_EVENTS_MASK 0x40000000u
-#define PM_MSI_INT_EVENTS_SHIFT 30
-#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
-#define PM_MSI_INT_SYS_ERR_SHIFT 31
-#define NUM_LOCAL_EVENTS 15
-#define ISTATUS_LOCAL 0x184
-#define IMASK_HOST 0x188
-#define ISTATUS_HOST 0x18c
-#define IMSI_ADDR 0x190
-#define ISTATUS_MSI 0x194
-
-/* PCIe Master table init defines */
-#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
-#define ATR0_PCIE_ATR_SIZE 0x25
-#define ATR0_PCIE_ATR_SIZE_SHIFT 1
-#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
-#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
-
-/* PCIe AXI slave table init defines */
-#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
-#define ATR_SIZE_SHIFT 1
-#define ATR_IMPL_ENABLE 1
-#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
-#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
-#define PCIE_TX_RX_INTERFACE 0x00000000u
-#define PCIE_CONFIG_INTERFACE 0x00000001u
-
-#define ATR_ENTRY_SIZE 32
-
/* PCIe Controller Phy Regs */
#define SEC_ERROR_EVENT_CNT 0x20
#define DED_ERROR_EVENT_CNT 0x24
@@ -160,9 +83,6 @@
#define PCIE_EVENT_INT_ENB_SHIFT 16
#define NUM_PCIE_EVENTS (3)
-/* PCIe Config space MSI capability structure */
-#define MC_MSI_CAP_CTRL_OFFSET 0xe0u
-
/* Events */
#define EVENT_PCIE_L2_EXIT 0
#define EVENT_PCIE_HOTRST_EXIT 1
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
new file mode 100644
index 000000000000..faee30b0a761
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PLDA PCIe host controller driver
+ */
+
+#ifndef _PCIE_PLDA_H
+#define _PCIE_PLDA_H
+
+/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
+#define IMASK_LOCAL 0x180
+#define DMA_END_ENGINE_0_MASK 0x00000000u
+#define DMA_END_ENGINE_0_SHIFT 0
+#define DMA_END_ENGINE_1_MASK 0x00000000u
+#define DMA_END_ENGINE_1_SHIFT 1
+#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
+#define DMA_ERROR_ENGINE_0_SHIFT 8
+#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
+#define DMA_ERROR_ENGINE_1_SHIFT 9
+#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
+#define A_ATR_EVT_POST_ERR_SHIFT 16
+#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
+#define A_ATR_EVT_FETCH_ERR_SHIFT 17
+#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
+#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
+#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define A_ATR_EVT_DOORBELL_SHIFT 19
+#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
+#define P_ATR_EVT_POST_ERR_SHIFT 20
+#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
+#define P_ATR_EVT_FETCH_ERR_SHIFT 21
+#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
+#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
+#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define PM_MSI_INT_INTA_MASK 0x01000000u
+#define PM_MSI_INT_INTA_SHIFT 24
+#define PM_MSI_INT_INTB_MASK 0x02000000u
+#define PM_MSI_INT_INTB_SHIFT 25
+#define PM_MSI_INT_INTC_MASK 0x04000000u
+#define PM_MSI_INT_INTC_SHIFT 26
+#define PM_MSI_INT_INTD_MASK 0x08000000u
+#define PM_MSI_INT_INTD_SHIFT 27
+#define PM_MSI_INT_INTX_MASK 0x0f000000u
+#define PM_MSI_INT_INTX_SHIFT 24
+#define PM_MSI_INT_MSI_MASK 0x10000000u
+#define PM_MSI_INT_MSI_SHIFT 28
+#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
+#define PM_MSI_INT_AER_EVT_SHIFT 29
+#define PM_MSI_INT_EVENTS_MASK 0x40000000u
+#define PM_MSI_INT_EVENTS_SHIFT 30
+#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
+#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define NUM_LOCAL_EVENTS 15
+#define ISTATUS_LOCAL 0x184
+#define IMASK_HOST 0x188
+#define ISTATUS_HOST 0x18c
+#define IMSI_ADDR 0x190
+#define ISTATUS_MSI 0x194
+
+/* PCIe Master table init defines */
+#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
+#define ATR0_PCIE_ATR_SIZE 0x25
+#define ATR0_PCIE_ATR_SIZE_SHIFT 1
+#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
+#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
+
+/* PCIe AXI slave table init defines */
+#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
+#define ATR_SIZE_SHIFT 1
+#define ATR_IMPL_ENABLE 1
+#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
+#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
+#define PCIE_TX_RX_INTERFACE 0x00000000u
+#define PCIE_CONFIG_INTERFACE 0x00000001u
+
+#define ATR_ENTRY_SIZE 32
+
+/* PCIe Config space MSI capability structure */
+#define MC_MSI_CAP_CTRL_OFFSET 0xe0u
+
+#endif
--
2.17.1
next prev parent reply other threads:[~2023-08-14 8:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 8:20 [PATCH v3 0/11] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2023-08-14 8:20 ` [PATCH v3 01/11] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2023-08-17 15:40 ` Rob Herring
2023-08-14 8:20 ` [PATCH v3 02/11] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2023-08-14 13:33 ` Conor Dooley
2023-08-14 8:20 ` Minda Chen [this message]
2023-08-14 13:32 ` [PATCH v3 03/11] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Conor Dooley
2023-08-14 8:20 ` [PATCH v3 04/11] PCI: microchip: Rename data structure and functions Minda Chen
2023-08-14 13:42 ` Conor Dooley
2023-08-14 8:20 ` [PATCH v3 05/11] PCI: plda: Move the common functions to pcie-plda-host.c Minda Chen
2023-08-14 13:46 ` Conor Dooley
2023-08-14 8:20 ` [PATCH v3 06/11] PCI: plda: Add event interrupt codes and IRQ domain ops Minda Chen
2023-08-14 13:52 ` Conor Dooley
2023-08-15 10:12 ` Minda Chen
2023-08-15 13:11 ` Conor Dooley
2023-08-18 10:15 ` Minda Chen
2023-08-14 8:20 ` [PATCH v3 07/11] PCI: microchip: Rename IRQ init function Minda Chen
2023-08-14 13:55 ` Conor Dooley
2023-08-15 10:43 ` Minda Chen
2023-08-14 8:20 ` [PATCH v3 08/11] PCI: microchip: Move IRQ init functions to pcie-plda-host.c Minda Chen
2023-08-14 13:57 ` Conor Dooley
2023-08-15 10:15 ` Minda Chen
2023-08-14 8:20 ` [PATCH v3 09/11] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2023-08-14 13:18 ` Conor Dooley
2023-08-17 15:40 ` Rob Herring
2023-08-25 9:06 ` Minda Chen
2023-08-25 9:21 ` Krzysztof Kozlowski
2023-08-14 8:20 ` [PATCH v3 10/11] PCI: starfive: Add " Minda Chen
2023-08-14 8:20 ` [PATCH v3 11/11] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230814082016.104181-4-minda.chen@starfivetech.com \
--to=minda.chen@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=conor@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=kevin.xie@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mason.huo@starfivetech.com \
--cc=p.zabel@pengutronix.de \
--cc=pali@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).