* [PATCH v2] ARM: dts: apq8064: add support to gsbi4 uart
@ 2023-08-14 15:00 David Heidelberg
2023-08-15 18:49 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: David Heidelberg @ 2023-08-14 15:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: David Heidelberg, linux-arm-msm, devicetree, linux-kernel
This patch adds support to gsbi4 uart which is used in LG Mako.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2:
- incorporated Krzysztof hints: added -state to the node name,
and -pins to the sub-nodes
arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 16 ++++++++++++++++
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 12 ++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
index 1f15186dd710..3ece5260ee51 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -233,6 +233,22 @@ pinconf {
};
};
+ gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
+ rx-pins {
+ pins = "gpio11";
+ function = "gsbi4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio10";
+ function = "gsbi4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
gsbi6_uart_2pins: gsbi6_uart_2pins {
mux {
pins = "gpio14", "gpio15";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 2ab69dd69862..870205028f5c 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -547,6 +547,18 @@ gsbi4: gsbi@16300000 {
#size-cells = <1>;
ranges;
+ gsbi4_serial: serial@16340000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16340000 0x100>,
+ <0x16300000 0x3>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&gsbi4_uart_pin_a>;
+ pinctrl-names = "default";
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
gsbi4_i2c: i2c@16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
pinctrl-0 = <&i2c4_pins>;
--
2.40.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: apq8064: add support to gsbi4 uart
2023-08-14 15:00 [PATCH v2] ARM: dts: apq8064: add support to gsbi4 uart David Heidelberg
@ 2023-08-15 18:49 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2023-08-15 18:49 UTC (permalink / raw)
To: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, David Heidelberg
Cc: linux-arm-msm, devicetree, linux-kernel
On Mon, 14 Aug 2023 17:00:40 +0200, David Heidelberg wrote:
> This patch adds support to gsbi4 uart which is used in LG Mako.
>
>
Applied, thanks!
[1/1] ARM: dts: apq8064: add support to gsbi4 uart
commit: f6ce0896b4ec0683abfcc86a6facdacb72e1b23c
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-08-15 18:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-14 15:00 [PATCH v2] ARM: dts: apq8064: add support to gsbi4 uart David Heidelberg
2023-08-15 18:49 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).