Re: [PATCH v2 4/7] LoongArch: dts: DeviceTree for Loongson-2K0500

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 2423 bytes --]

On Tue, Aug 15, 2023 at 04:51:10PM +0800, Binbin Zhou wrote:
> Add DeviceTree file for Loongson-2K0500 processor, which integrates one
> 64-bit dual emission superscalar LA264 processor core.
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> ---
>  arch/loongarch/boot/dts/Makefile              |   2 +
>  .../boot/dts/loongson-2k0500-ref.dts          | 115 +++++++++
>  arch/loongarch/boot/dts/loongson-2k0500.dtsi  | 244 ++++++++++++++++++
>  3 files changed, 361 insertions(+)
>  create mode 100644 arch/loongarch/boot/dts/loongson-2k0500-ref.dts
>  create mode 100644 arch/loongarch/boot/dts/loongson-2k0500.dtsi
> 
> diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
> index 1e24cdb5180a..aa0b21d73d4e 100644
> --- a/arch/loongarch/boot/dts/Makefile
> +++ b/arch/loongarch/boot/dts/Makefile
> @@ -1,3 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  
> +dtb-$(CONFIG_MACH_LOONGSON64)	= loongson-2k0500-ref.dtb
> +
>  obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
> diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
> new file mode 100644
> index 000000000000..c89662e5a296
> --- /dev/null
> +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Loongson Technology Corporation Limited
> + */
> +
> +/dts-v1/;
> +
> +#include "loongson-2k0500.dtsi"
> +
> +/ {
> +	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
> +	model = "Loongson-2K0500 Reference Board";
> +
> +	aliases {
> +		ethernet0 = &gmac0;
> +		ethernet1 = &gmac1;
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +		bootargs = "earlycon";
> +	};
> +
> +	cpu_clk: cpu-clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <500000000>;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			compatible = "loongson,la264";
> +			device_type = "cpu";
> +			reg = <0x0>;
> +			clocks = <&cpu_clk>;
> +		};
> +	};

I've not read this whole patch, but from a glance - why is the cpu node
in the board file, not the soc one?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]