[PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants

[PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants

[Patrick Rudolph]

v15:
- Clarified VDD usage on PCA9846 which has two VDD pins 

v14:
- Added comment for interrupt support

v13:
- Fix dt-binding
- Fixed nits

v12:
- Add separate patch correcting interrupt support in dt-binding
- Fix typo in commit message
- Make vdd-supply non optional

v11:
- Fix dt-binding example

v10:
- Small updates to dt-bindings
- Make vdd-supply optional
- Drop MAX7357 enhanced mode configuration

v9:
- Fix 'then' not aligned with 'if' in dt-bindings
- Split enhanced mode configuration into separate patch
- Add MAX7357/MAX7358 register definitions
- Rename config register defines
- Update comments and explain non default config being applied on MAX7357
- Check for I2C_FUNC_SMBUS_WRITE_BYTE_DATA functionality

v8:
- Move allOf in dt-binding and use double negation

v7:
- Reworked the commit message, comments and renamed a struct
  field. No functional change.

v6:
- Fix typo in dt-bindings

v5:
- Remove optional and make vdd-supply mandatory

v4:
- Add missing maxitems dt-bindings property

v3:
- Merge dt-bindings into i2c-mux-pca954x.yaml

v2:
- Move dt-bindings to separate file
- Added support for MAX736x as they are very similar
- Fixed an issue found by kernel test robot
- Dropped max735x property and custom IRQ check
- Added MAX7357 config register defines instead of magic values
- Renamed vcc-supply to vdd-supply

Patrick Rudolph (4):
  dt-bindings: i2c: pca954x: Correct interrupt support
  dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  i2c: muxes: pca954x: Add MAX735x/MAX736x support
  i2c: muxes: pca954x: Add regulator support

 .../bindings/i2c/i2c-mux-pca954x.yaml         | 46 ++++++++--
 drivers/i2c/muxes/Kconfig                     |  6 +-
 drivers/i2c/muxes/i2c-mux-pca954x.c           | 92 +++++++++++++++++--
 3 files changed, 129 insertions(+), 15 deletions(-)

-- 
2.41.0

[PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support

[Patrick Rudolph]

Only some of the PCA954x compatible ICs have interrupt
capability, but the binding advertises it on all ICs.

Sync the dt-binding with the driver and only advertise it on:
 - nxp,pca9542
 - nxp,pca9543
 - nxp,pca9544
 - nxp,pca9545

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/i2c/i2c-mux-pca954x.yaml         | 23 +++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 9f1726d0356b..e5c1070903ef 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -12,9 +12,6 @@ maintainers:
 description:
   The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
 
-allOf:
-  - $ref: /schemas/i2c/i2c-mux.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -63,6 +60,24 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nxp,pca9542
+                - nxp,pca9543
+                - nxp,pca9544
+                - nxp,pca9545
+    then:
+      properties:
+        interrupts: false
+        "#interrupt-cells": false
+        interrupt-controller: false
+
 unevaluatedProperties: false
 
 examples:
@@ -74,7 +89,7 @@ examples:
         #size-cells = <0>;
 
         i2c-mux@74 {
-            compatible = "nxp,pca9548";
+            compatible = "nxp,pca9545";
             #address-cells = <1>;
             #size-cells = <0>;
             reg = <0x74>;
-- 
2.41.0

[PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants

[Patrick Rudolph]

Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
chips. The functionality will be provided by the existing pca954x driver.

For chips that are powered off by default add a regulator called vdd-supply.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/i2c/i2c-mux-pca954x.yaml         | 23 +++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index e5c1070903ef..2d7bb998b0e9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -4,18 +4,29 @@
 $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PCA954x I2C bus switch
+title: NXP PCA954x I2C and compatible bus switches
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 description:
-  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
+  The NXP PCA954x and compatible devices are I2C bus
+  multiplexer/switches that share the same functionality
+  and register layout.
+  The devices usually have 4 or 8 child buses, which are
+  attached to the parent bus by using the SMBus "Send Byte"
+  command.
 
 properties:
   compatible:
     oneOf:
       - enum:
+          - maxim,max7356
+          - maxim,max7357
+          - maxim,max7358
+          - maxim,max7367
+          - maxim,max7368
+          - maxim,max7369
           - nxp,pca9540
           - nxp,pca9542
           - nxp,pca9543
@@ -56,6 +67,10 @@ properties:
     description: if present, overrides i2c-mux-idle-disconnect
     $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
 
+  vdd-supply:
+    description: A voltage regulator supplying power to the chip. On PCA9846
+      the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
+
 required:
   - compatible
   - reg
@@ -68,6 +83,8 @@ allOf:
           compatible:
             contains:
               enum:
+                - maxim,max7367
+                - maxim,max7369
                 - nxp,pca9542
                 - nxp,pca9543
                 - nxp,pca9544
@@ -94,6 +111,8 @@ examples:
             #size-cells = <0>;
             reg = <0x74>;
 
+            vdd-supply = <&p3v3>;
+
             interrupt-parent = <&ipic>;
             interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
-- 
2.41.0

Re: [PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants

[Peter Rosin]

Hi!

2023-08-17 at 09:10, Patrick Rudolph wrote:
> v15:
> - Clarified VDD usage on PCA9846 which has two VDD pins 
> 
> v14:
> - Added comment for interrupt support
> 

*snip*

This has gone on for far too long and the series feels more than ready...
Thanks for your persistence!

Cheers,
Peter

Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support

[Peter Rosin]

Hi!

2023-08-17 at 09:10, Patrick Rudolph wrote:
> Only some of the PCA954x compatible ICs have interrupt
> capability, but the binding advertises it on all ICs.
> 
> Sync the dt-binding with the driver and only advertise it on:
>  - nxp,pca9542
>  - nxp,pca9543
>  - nxp,pca9544
>  - nxp,pca9545
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Peter Rosin <peda@axentia.se>

Cheers,
Peter

Re: [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants

[Peter Rosin]

Hi!

2023-08-17 at 09:10, Patrick Rudolph wrote:
> Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
> chips. The functionality will be provided by the existing pca954x driver.
> 
> For chips that are powered off by default add a regulator called vdd-supply.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Peter Rosin <peda@axentia.se>

Cheers,
Peter

Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 495 bytes --]

On Thu, Aug 17, 2023 at 09:10:50AM +0200, Patrick Rudolph wrote:
> Only some of the PCA954x compatible ICs have interrupt
> capability, but the binding advertises it on all ICs.
> 
> Sync the dt-binding with the driver and only advertise it on:
>  - nxp,pca9542
>  - nxp,pca9543
>  - nxp,pca9544
>  - nxp,pca9545
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 476 bytes --]

On Thu, Aug 17, 2023 at 09:10:51AM +0200, Patrick Rudolph wrote:
> Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
> chips. The functionality will be provided by the existing pca954x driver.
> 
> For chips that are powered off by default add a regulator called vdd-supply.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 627 bytes --]

On Wed, Aug 23, 2023 at 11:15:08PM +0200, Wolfram Sang wrote:
> On Thu, Aug 17, 2023 at 09:10:50AM +0200, Patrick Rudolph wrote:
> > Only some of the PCA954x compatible ICs have interrupt
> > capability, but the binding advertises it on all ICs.
> > 
> > Sync the dt-binding with the driver and only advertise it on:
> >  - nxp,pca9542
> >  - nxp,pca9543
> >  - nxp,pca9544
> >  - nxp,pca9545
> > 
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Applied to for-next, thanks!

I replied to V15 but I applied V16!



[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]