[PATCH 3/8] usb: dwc3: exynos: Add support for Exynos850 variant

[Sam Protsenko <semen.protsenko@linaro.org>]

Add Exynos850 compatible string and associated driver data. Only two
clocks are needed for this SoC:
  - bus_early: bus clock needed for registers access
  - ref: USB 2.0 DRD reference clock (50 MHz)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index f882dd647340..5d365ca51771 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -163,6 +163,12 @@ static const struct dwc3_exynos_driverdata exynos7_drvdata = {
 	.suspend_clk_idx = 1,
 };
 
+static const struct dwc3_exynos_driverdata exynos850_drvdata = {
+	.clk_names = { "bus_early", "ref" },
+	.num_clks = 2,
+	.suspend_clk_idx = -1,
+};
+
 static const struct of_device_id exynos_dwc3_match[] = {
 	{
 		.compatible = "samsung,exynos5250-dwusb3",
@@ -173,6 +179,9 @@ static const struct of_device_id exynos_dwc3_match[] = {
 	}, {
 		.compatible = "samsung,exynos7-dwusb3",
 		.data = &exynos7_drvdata,
+	}, {
+		.compatible = "samsung,exynos850-dwusb3",
+		.data = &exynos850_drvdata,
 	}, {
 	}
 };
-- 
2.39.2