[PATCH v3 00/18] phy: qcom-qmp-pcie: convert to newer style of bindings

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Reviewing several patchsets for newer platforms made it clear that
having two styles of QMP PHY bindings causes confusion. Despite binding
documents having notes telling that old bindings should be used for
older platforms, it is too easy to attempt adding new platform with
older QMP PHY binding. Thus let's have just a single documented style of
bindings.

Proposed merge strategy: immutable branch with binding and PHY patches,
which can also be merged into Bjorn's dts-for-6.7

Changes since v2:
 - Split away patches for sm8150 PHYs. Add missing driver bits to enable
   PCIe PHY support on sm8150 (were submitted by Bhupesh in May 2022,
   only DT bits were merged)
 - Fixed v5.20 offsets merged earlier. Fixed merge conflict due to their
   addition
 - Fixed clocks / clock-names alignment in ipq8074.dtsi / sc7280.dtsi
   (Konrad)
 - Fixed PHY DT names and resource address for sc8180x (Konrad)

Changes since v1:
 - Split large patchset into smaller parts
 - Rebased on phy/next

Dmitry Baryshkov (18):
  dt-bindings: phy: migrate QMP PCIe PHY bindings to
    qcom,sc8280xp-qmp-pcie-phy.yaml
  dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
  phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
  phy: qcom-qmp-pcie: keep offset tables sorted
  phy: qcom-qmp-pcie: simplify clock handling
  phy: qcom-qmp-pcie: populate offsets configuration
  phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
  arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of
    bindings
  arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of
    bindings
  arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of
    bindings
  arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings
  arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of
    bindings
  arm64: dts: qcom: sdm845: switch PCIe QMP PHY to new style of bindings
  arm64: dts: qcom: sm8150: add ref clock to PCIe PHYs
  arm64: dts: qcom: sm8150: switch PCIe QMP PHY to new style of bindings
  arm64: dts: qcom: sm8250: switch PCIe QMP PHY to new style of bindings
  arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings
  ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings

 .../phy/qcom,ipq8074-qmp-pcie-phy.yaml        | 278 +++---------------
 .../phy/qcom,msm8998-qmp-pcie-phy.yaml        |  97 ++++++
 .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml       |  36 ++-
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi        |  31 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  32 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi         |  67 ++---
 arch/arm64/boot/dts/qcom/msm8998.dtsi         |  30 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  40 +--
 arch/arm64/boot/dts/qcom/sc8180x.dtsi         | 148 ++++------
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  71 ++---
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  70 ++---
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 112 +++----
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  82 +++---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 177 ++++++-----
 14 files changed, 537 insertions(+), 734 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml

-- 
2.39.2