From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: andrew@lunn.ch, gregory.clement@bootlin.com,
sebastian.hesselbarth@gmail.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
kostap@marvell.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH] ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins
Date: Mon, 21 Aug 2023 10:51:25 +1200 [thread overview]
Message-ID: <20230820225126.561304-1-chris.packham@alliedtelesis.co.nz> (raw)
Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the
pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins"
and update the node name to "cp0-spi-pins-1" to avoid confusion with the
pinctrl options for SPI0.
Fixes: 4c43a41e5b8c ("arm64: dts: cn913x: add device trees for topology B boards")
Fixes: 5c0ee54723f3 ("arm64: dts: add support for Marvell cn9130-crb platform")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Notes:
We noticed this while tracking down a U-Boot bug on one of our
platforms. This mislabeling had been copied and we ended up using the
label when configuring SPI0 which had the nasty side effect of
reconfiguring the NAND/DEV pins into SPI1 mode when SPI0 was probed.
It probably went unnoticed because none of the CN9130 platforms
supported in upstream U-Boot use NAND.
arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 4 ++--
arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 32cfb3e2efc3..47d45ff3d6f5 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -120,7 +120,7 @@ cp0_sdhci_pins: cp0-sdhi-pins-0 {
"mpp59", "mpp60", "mpp61";
marvell,function = "sdio";
};
- cp0_spi0_pins: cp0-spi-pins-0 {
+ cp0_spi1_pins: cp0-spi-pins-1 {
marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
@@ -170,7 +170,7 @@ &cp0_sdhci0 {
&cp0_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
+ pinctrl-0 = <&cp0_spi1_pins>;
reg = <0x700680 0x50>, /* control */
<0x2000000 0x1000000>; /* CS0 */
status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index c7de1ea0d470..6eb6a175de38 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -307,7 +307,7 @@ &cp0_sdhci0 {
&cp0_spi1 {
status = "disabled";
pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
+ pinctrl-0 = <&cp0_spi1_pins>;
reg = <0x700680 0x50>;
flash@0 {
@@ -371,7 +371,7 @@ cp0_sdhci_pins: cp0-sdhi-pins-0 {
"mpp59", "mpp60", "mpp61";
marvell,function = "sdio";
};
- cp0_spi0_pins: cp0-spi-pins-0 {
+ cp0_spi1_pins: cp0-spi-pins-1 {
marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
--
2.41.0
next reply other threads:[~2023-08-20 22:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-20 22:51 Chris Packham [this message]
2023-09-12 22:52 ` [PATCH] ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins Andrew Lunn
2023-09-20 9:44 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230820225126.561304-1-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kostap@marvell.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).