[PATCH 4/5] arm64: dts: imx8: update lpuart[0..3] irq number

[Frank Li <Frank.Li@nxp.com>]

Original irq number combined UART irq and DMA irq. These doesn't match
uart driver and dma engine's expection.

Update to the irq numbers, which just uart can trigger.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 92ed02e6048c..f26f8ee5d2f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -86,7 +86,7 @@ lpspi3: spi@5a030000 {
 
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -98,7 +98,7 @@ lpuart0: serial@5a060000 {
 
 	lpuart1: serial@5a070000 {
 		reg = <0x5a070000 0x1000>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -112,7 +112,7 @@ lpuart1: serial@5a070000 {
 
 	lpuart2: serial@5a080000 {
 		reg = <0x5a080000 0x1000>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -126,7 +126,7 @@ lpuart2: serial@5a080000 {
 
 	lpuart3: serial@5a090000 {
 		reg = <0x5a090000 0x1000>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
-- 
2.34.1